http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전병헌 한국계량경제학회 2002 계량경제학보 Vol.13 No.4
협상문제는 가장 오래된 경제문제의 하나라 볼 수 있으나 이에 대한 경제학적인 해답이 제시되기 시작한 것은 1950년대 Nash의 연구로부터라고 할 수 있다. 1980년대에 들어오면서 게임이론의 활발한 연구와 더불어 협상에 대한 연구도 많은 진전을 보았다. 본고에서는 협상이론의 발전에 대해 문헌의 소개와 더불어 알아보고자 한다.
파업과 노조대표 교체에 관한 이론적 고찰 : 파업과 대표교체
전병헌 韓國計量經濟學會 1993 계량경제학보 Vol.4 No.-
본고에서는 노사간의 임금협상의 결과가 노조대표의 교체여부에 어떻게 영향을 미치는가를 고려한다. 노조는 노조대표와 일반 조합원으로 구성되며, 임금협상은 노조대표와 기업(대표) 간에 이루어진다. 기업의 지불능력은 기업만이 알고 있고 노조는 그 확률분포만 알고 있다. 노조대표는 다른 조합원이 모르는 정보를 갖고 있다. 노조대표의 능력은 그가 갖게 되는 정보의 정확성에 의해 대표되며 노조원들은 협상결과와 기업의 지불능력에 대한 사후적 정보를 비교하여 대표를 평가하고 교체여부를 결정한다. 이 경우 파업이 일어나면 그 결과에 관계없이, 즉 어느쪽 주장이 관철되는가에 상관없이 노조대표에 대한 평가는 나빠지고 따라서 교체 가능성은 높아진다. 파업이 발생하지 않고 사용자가 양보하였을 경우에는 노조대표에 대한 평가는 좋아진다. 파업없이 노조대표가 양보했을 때에는 노조대표에 대한 평가는 사후적으로 알려지는 기업의 지불능력에 따라 달라진다. 만일 기업의 지불능력이 큰 것이 알려졌다면 노조대표의 평가는 파업이 발생한 경우와 같이 낮아진다. 그러나 기업의 지불능력이 작은 것으로 판명되면 대표에 대한 평가는 오히려 높아진다.
전병헌 韓國計量經濟學會 1991 계량경제학보 Vol.2 No.-
본 논문에서는 노사간의 임금협상에 있어 노조의 대표에 대한 협상타결권 위임결정과정을 고찰한다. 위임에는 정보상의 이점이 있으나 노조대표에 대한 노조원들의 불신이 이를 완전히 활용하지 못하도록 작용한다는 점에 촛점을 맞추어 비협조적 게임으로 문제를 분석한다. 위임은 임금지불 능력에 대한 노조원들의 전망이 비관적일 때 발생한다는 결론이 도출되며, 노조의 행태분석에 필요한 대내 및 대외적인 의사결정과정이 비대칭적 정보하의 게임으로 모형화된다.
전열교환 환기시스템의 운전 상태에 따른 결로 발생에 관한 연구
전병헌(Byung-Heon Jeon),김종원(Jong-Won Kim),이승갑(Seung-Kap Lee),이영주(Young-Ju Lee),안영철(Young-Chull Ahn) 대한설비공학회 2013 설비공학 논문집 Vol.25 No.10
Heat-recovery ventilators are being adopted in most newly built apartment houses for energy reduction and indoor environment improvement. In winter, however, the dew condensation resulting from the difference between the indoor and outdoor temperatures may reduce the ventilator.s performance and threaten the health of indoor residents. This study analyzes the occurrence of dew condensation according to the ventilator.s operational conditions and the changes of temperature and products. The experimental results show that condensations is formed at 26℃ and 60%R.H, which is an unfavorable climatic condition, and when the damper is not closed tightly. Therefore it is important to ensure damper performance to prevent back flow.
전열교환 환기시스템의 운전 상태에 따른 결로 발생에 관한 연구
전병헌(Byung-Heon Jeon),김종원(Jong-Won Kim),이승갑(Seung-Kap Lee),이영주(Young-Ju Lee),안영철(Young-Chull Ahn) 대한설비공학회 2012 대한설비공학회 학술발표대회논문집 Vol.2012 No.11
In these days, heat-recovery ventilators are being adopted in most of newly built apartment houses for energy reduction and indoor environment improvement. In winter, however, the dew condensation resulting from the difference between the indoor and outdoor temperatures may reduce ventilator"s performance and threaten health of indoor residents. This study is intended to analyze the occurrence of dew condensation according to the ventilator"s operational conditions and the changes of temperature and products. The experimental results shows that condensations are formed at 26℃ and 60%R.H. which is an unfavorable climatic condition, and when the damper is not closed tightly. Therefore it is important to ensure the damper performance for preventing back flows.
전병헌(Byung-Heon Jeon),김종원(Jong-Won Kim),안영철(Young-Chull Ahn) 대한설비공학회 2013 대한설비공학회 학술발표대회논문집 Vol.2013 No.6
Recently, heat exchanger has been increasing interest and application for energy savings and indoor environment improvement. Heat exchanger that is air to air type transfer heat energy from exhaust air to supply air. As a result, It is possible energy savings for heating and cooling through pre-heating or pre-cooling effect and, fresh air is supplied indoors. Major components of the heat exchanger is improving the highest level through the technology development of fan, heat exchange element, filters, etc. However, components of the heat exchanger alter the performance depending on structure design. Suction part of the fan set in the middle of keeping a certain distance between heat exchange element of the hexagon shape and filter for the ideal heat exchanger design. The reasons for using equally function of each component prevent the windage as much as possible. But, Heat exchange element that is designed structure can check each component in the flank is installed as block form for high-capacity. This study measure the efficiency change and air flow formation in the heat exchanger to check the validity of design.