http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Hoffa씨 지방층의 관절강내 및 관절주위 연골종: 증례 보고
장석기,홍혁진,한은미,강수민,유진영,안인옥 대한자기공명의과학회 2008 Investigative Magnetic Resonance Imaging Vol.12 No.2
Intracapsular and paraarticular chondroma is a rare benign lesion of the large joints (mostly the knee). We report a case of intracapsular and paraarticular chondroma in the infrapatellar Hoffa’s fat pad that presented as a painful palpable mass in 15-yearold woman. A physical examination revealed a firm, movable and tender mass in the infrapatellar area. Magnetic resonance images showed an ovoid, well-defined, soft tissue mass with focal calcification in the infrapatellar fat pad. The final pathology revealed an intracapsular and paraarticular chondroma.
NGN에서 QoS 제공을 위한 GMPLS의 라우팅 및 시그널링 화장 연구
장석기,박광채 한국정보통신학회 2003 한국정보통신학회논문지 Vol.7 No.5
네트워크는 IP 계층과 광 계층이 수렴되는 광인터넷 네트워크로 진화할 것으로 예상되나, 현재의 기술수준으로 인해 과도적인 진화단계로서 GMPLS가 대두되었다. MPLS가 확장되고 일반화된 GMPLS는 패킷 교환 장치뿐만 아니라 시간, 파장 및 공간 영역에서 교환을 수행하는 장치까지 지원할 수 있도록 하고 있다. 이런 다양한 스위칭 타입에 공통적인 제어 평면을 구현하기 위해 GMPLS에서는 기존의 MPLS 신호 및 라우팅 프로토콜을 확장하게된다. 본 논문에서는 GMPLS 기술의 개요와 MPLS에서 링크의 상태 정보를 교환하기 위해 사용되었던 OSPF(Open shortest Path First) 프로토콜을 광 네트워크에서 다양한 링크 타입, 대역폭, 링크 보호 타입 등의 정보를 주고받기 위한 라우팅 확장 방안에 대하여 알아보고, 두 노드간의 수백, 수천개의 링크를 관리하는 복잡한 문제를 해결하기 위한 신호 프로토콜로 LMP라는 새로운 프로토콜의 정의를 기술한다. 그리고 MPLS에서 트래픽 엔지니어링을 위한 신호 프로토콜인 RSVP-TE를 GMPLS에 적용하기 위한 신호 프로토콜의 확장 방안과 수정된 RSVP 관련 메시지들을 검토분석 한다. Network is expected to be developed into optical Internet network collected IP layer and optical layer, but GMPLS is risen at the transitional evolution stage because of the present technology level. GMPLS that MPLS is extended and generalized is able to support not only the packet switching device but also the devices which perform switching in time, wavelength, and space domain. To implement the common control plane to these various switching types, GMPLS extends the existing MPLS signaling and routing protocol. In this paper, we describe the overview of GMPLS technology, and then we will refer to the OSPF(Open Shortest Path First), which was used to exchange the status information of link, as the plan of routing extension to exchange the information of various link type, bandwidth, link protection type etc. And also, we describe the definition of new protocol, so called, LMP that is a signaling protocol for solving complex problem which manages hundreds and thousands of links between two nodes. And we will examine and analyze the plan of signaling protocol extension to apply signaling protocol RSVP-TE(Resource Reservation Protocol) for traffic engineering in MPLS to network, and the message objects and formats associated with modified RSVP.
밀링을 이용한 AI합금의 마찰 교반용접용 최적공구형상 및 치수개발에 관한 연구
장석기,신상현 한국마린엔지니어링학회 2001 한국마린엔지니어링학회지 Vol.25 No.4
Friction stir welding is a solid phase welding process that does not melt the metal when welding. The FSW is the most remarkable and potentially useful new welding technique that is still in development. Friction stir butt welding process on 2 mm thick Al 1050 plates by utilizing a milling machine was experimentally studied. With the optimized heat generating tool welds could be achieved that are void and crack free. It was found that the friction stir welded tensile test specimens failed in the HAZ outside of the weld metal, and that the tensile strength was above 90% of that of the base metal.
박용외판재의 두께에 따른 용접부의 잔류응력에 관한 고찰
장석기,전정일,김상진,한민수 木浦海洋大學校 2002 論文集 Vol.10 No.1
The present shows residual stress distribution curves on weldment of various thickness of steel plates for vessel using X-ray diffraction powder Fe method. This research is reported that different thickness of specimens and welding conditions had effect on residual stress distribution of weldment on surface and cross section of specimens
장석기,전정일,Jang Seok-Ki,Jeon Jeong-Il 한국마린엔지니어링학회 2006 한국마린엔지니어링학회지 Vol.30 No.1
This paper shows mechanical Properties and behaviors of macrostructures for specimens welded by F.S.W according to welding conditions and tool dimensions with $6.35mm_t$ aluminum 7075-T651 alloy plate. It apparently results in defect-free weld zone in case transition speed was changed to 15mm/min 61mm/min and 124mm/min under conditions of tool rotation speed such as 800rpm. 1250rpm and 1600rpm respectively with tool's Pin diameter 40mm and 60mm. The optimum mechanical property, ultimate stress,${\sigma}_Y=470Mpa$ is obtained at the condition of 124mm/min of travel speed with 800rpm of tool rotation speed using full screw type pin. shoulder dia. $20{\phi}mm$ pin dia. $6{\phi}mm$ and pin length 6mm. The full-screw type and the half-screw type pin shows the similar behaviors of weldability. It is found that the size of nugget is depended on tool transition speed and tool dimension by macrostructures of the cross section of weld zone.
장석기 한국마린엔지니어링학회 2000 한국마린엔지니어링학회지 Vol.24 No.6
This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$