http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
SRM 컨버터에서 자기동조 방식에 의한 턴오프 각의 결정
장도현,문진영 전력전자학회 1998 전력전자학회 논문지 Vol.3 No.4
본 논문에서는 위상각 제어에서 주어진 턴온 각에서 최대의 토크를 유지하기 위한 적절한 턴오프 각을 자기동조방식(self-tuning method)에 의해 결정하는 방식을 제안하였다. 엔코더에 의해 샘플링 시간(sampling time)동안 구해진 펄스 수는 바로 이전의 샘플링시간 동안 구해진 펄스 수와 비교하여 턴오프 각을 앞으로 또는 뒤로 이동한다. 이러한 과정을 되풀이함으로서 최대 토크를 발생하는 턴오프 각을 결정하게 된다. 실제 회로에서는 원 칩 마이크로프로세서에 의해 처리되었으며 실험을 통해 턴온 각이 변하더라도 자기동조방식에 의해 턴오프 각을 조정하면 빠른 속도가 유지됨을 보여 주었다. In this paper. determination method of turn-off angle in the SRM drives is proposed to maintain the high torque at a any turn-on angle, which is realized by using selHuning control method, During the sampling time. a number of P pulses from encoder are checked by using one-chip microprocessor. and compared with pre-checked a number of pulses A After calculating difference between two data, the turn-off angle moves forward or backward direction by the self-tuning m method, As repeating such process, the optimal turn-off angle is determined and the maximum torque is maintained T Though experiments, it is observed that motor speed is almost maintained if turn-off angle is adjusted automatically by s selHuning method when turn-ηn angle is changed.
Novel SRM Drive Systems Using Variable DC-Link Voltage
장도현 전력전자학회 2011 JOURNAL OF POWER ELECTRONICS Vol.11 No.3
This paper proposes two SRM driving systems using a variable dc-link voltage controlled by a single-phase inverter. Two SRM converter topologies of a half bridge type and a full bridge type are proposed according to the power circuits of an inverter. The phase current can be controlled by means of a PWM controller at the inverter, and the turn-on/off angle at the phase switches can be controlled by a position sensor at the converter in the drive system. The inverter acts as a peak-current limiter if the transient current exceeds its maximum value. SRMs using the proposed topologies maintain high efficiency due to energy regeneration after the turn-off of power switches. The operational modes of the proposed topologies are verified by simulation and experimental results.
2상 유도전동기의 구동을 위한 2상 인버터의 2상 공간전압벡터 PWM 방식
장도현,윤덕용 전력전자학회 2002 전력전자학회 논문지 Vol.7 No.1
In this paper the space voltage vector pulsewidth modulation(SVPWM) technique for two-phase inverter is proposed. The two-phase SVPWM technique is applicable to two-phase induction motor drives. The two-phase inverter using two-phase SVPWM technique cannot generate zero voltage vectors, but four space vectors. A reference voltage vector in the square locus is realized by adjusting four space vectors. The switching sequence “ two-phase symmetrical modulation” used in two-phase SVPWM is proposed. Practical verification of theoretical predictions is presented to conform the capabilities of the new technique. 본 논문에서는 2상 인버터용 공간전압벡터 PWM 방식을 제안하였다. 제안된 2상 공간전압벡터 PWM 방식은 2상 유도전동기에 적용할 수 있다. 2상 공간전압벡터 방식을 사용하는 2상 인버터는 4개의 공간 전압벡터를 발생하나 영 전압 벡터는 만들 수 없다. 2상 인버터에서는 4개의 공간 전압벡터를 조정하여 기본 전압벡터를 실현한다. 또한, 2상 공간전압벡터방식에 의해 최적의 PWM 전압파형을 만들기 위한 대칭변조방식이 제안되었다. 제안된 2상 공간전압벡터방식에 대한 타당성을 확인하기 위해 시뮬레이션과 실험이 실행되었다.
SEPIC 컨버터를 이용한 무전극형광램프용 고역률 전자식 안정기
장도현,주형종,권명일 전력전자학회 2004 전력전자학회 논문지 Vol.9 No.3
In this paper the electronic ballast using the SEPIC(Single Ended Primary Inductor Converter) converter for the multiple electrodeless fluorescent lamps is proposed, which has the structure of the active PFC and self oscillating function. The SEPIC converter system has the characteristics of the power factor with low input current harmonic distortion. The proposed control method is based on the average-current-mode using the dedicated integrated circuit UC3854. The proposed electronic ballast has the reduction effect for the energy and manufacturing cost because it is designed for tripple electrodeless fluorescent lamps. The experimental results shows that the power factor is higher and the THD is lower. 본 논문에서는 능동역률보상(PFC)의 구조를 가진 SEPIC 컨버터를 이용한 무전극 형광램프(electrodeless fluorescent lamps)용 전자식 안정기를 제안하였다. SEPIC 컨버터는 입력 전류의 낮은 고조파와 고역률의 특성을 가진다. 제안된 제어방법으로는 UC3854의 적분회로를 이용한 것으로 이 기술은 전류연속모드로 동작하는 역률보상 및 과전류보호를 제공하는 매우 간단한 제어 회로이다. 제안된 무전극 형광램프용 전자식 안정기는 3개의 무전극 형광램프용으로 설계되어 기존의 무전극 형광램프용 전자식 안정기보다 에너지 및 제작비 절약 효과가 크다. 제안된 안정기의 특성을 측정하기 위해 실험을 실시하였으며 이를 통해 고역률과 낮은 THD를 확인하였다.