http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
회절격자 간섭계를 이용한 초정밀 스테이지의 6 자유도 운동 특성 측정
이차범(ChaBum Lee),김규하(Gyu Ha Kim),이선규(Sun-Kyu Lee) Korean Society for Precision Engineering 2012 한국정밀공학회지 Vol.29 No.8
This paper presents the new method for a six-degree-of-freedom (DOF) motion measurement and those dynamic characterizations in an ultraprecision linear stage using angle sensorimplemented grating interferometry. It consists of a diffractive optical element, a corner cube, four separate two-dimensional position sensitive detectors, four photodiodes and auxiliary optics components. From the previous study, it was confirmed that the proposed optical system could measure a six-DOF motion error in a linear stage. In this article, six-DOF motion dynamic characteristics of the stage were investigated through the step response and with respect to the conditions with a different speed of a slide table. As a result, the natural frequency and damping ratio according to a six-DOF direction was obtained. Also, it was seen that the speed of slide table had an significant effect on a six-DOF displacement motion, especially, X, which was considered as the effect of friction mechanism and local elastic mechanical deformation in a slide guide.
링 형태 강섬유와 양단갈고리 선형 강섬유 보강 콘크리트 패널의 휨성능
이차돈,조원택 한국구조물진단유지관리공학회 2009 한국구조물진단유지관리공학회 논문집 Vol.13 No.1
링 형태의 강섬유 (Ring-type steel fibers: 이하 RSF)는 원형의 폐곡선 형태를 갖는 강섬유로서 선형강섬유와는 다른 저항 메카니즘을 가지며 폐곡선으로 둘러싸인 평면에 대하여 동일한 방향성을 가지는 특성을 갖는다. 이 연구에서는 섬유의 단위투입량 15kg/㎥과 30kg/㎥의 RSF 및 선형 강섬유를 혼입한 콘크리트 패널의 휨인성을 실험, 비교하였다. 파단면에서의 RSF의 저항 형태를 규명하였으며 RSF를 혼입한 패널이 선형 강섬유를 혼입한 패널에 비하여 우수한 인성값을 나타냄이 관찰되었다. RSF에 대한 방향성을 제시하였으며 RSF를 혼입한 실험체의 경우, 보 실험체에 비하여 두께가 상대적으로 얇은 패널 실험체에서 RSF가 더 효율적으로 인성 증가에 기여함이 관찰되었다. Ring-type steel fibers (RSFs) of the closed circular shape, have different resistance mechanisms other than straight steel fibers. RSFs also maintain the same value of the orientation factor for the plane enclosed by the fiber ring perimeter. In this research, comparative studies were performed for the panels reinforced with RSFs and with straight steel fibers of 15kg/㎥ and 30kg/㎥ , respectively. Resisting mechanisms of RSFs were identified and higher toughness indices were experimentally observed for the concrete panels reinforced with RSFs than with straight steel fibers. Orientation factor for the RSF was suggested. It was found that RSFs were more effective in increasing toughness for the panel specimens with relatively thinner thickness than beam specimens.
화성 Mawrth Vallis 지역에서 관찰되는 파쇄 패턴의 성질
이차복 ( Cha Bok Lee ) 한국지형학회 2012 한국지형학회지 Vol.19 No.2
화성 Mawrth Vallis지역의 점토광물을 함유한 층에서 관찰되는 파쇄 패턴의 성인을 파악하기 위해 HiRISE 영상데이터를 활용하여 분석하였다. 함유된 점토광물의 종류에 따라 지표에서 관찰되는 파쇄 패턴에 차이가 나타나는데 논트로나이트를 주로 함유한 지표의 경우 파쇄 패턴이 불규칙적이고 침식을 심하게 받은 상태이나, 몬모릴로나이트를 주로 함유한 층의 지표에는 크기와 형태가 비교적 일관성을 가지는 폴리곤 패턴이 잘 발달되어있다. 이들 폴리곤 파쇄 패턴의 성질은 점토광물 함유층에 따라 달리 해석되는데, 논트로나이트 함유층의 경우 대부분 하중 제거로 인해 발생한 것으로 보이며, 몬모릴로나이트 함유층의 지표에 발달한 파쇄 패턴은 건조 균열로 인해 발생한 것으로 추정된다. Fracture patterns observed in the phyllosilicate-bearing layers of the Mawrth Vallis region are analyzed using High Resolution Imaging Science Experiment image data in order to understand the causes of polygonal fracturing. HiRISE data show that the different mineralogies have distinct surface textures and morphologies. The majority of the nontronite-bearing rocks typically appear to have been heavily eroded and are fractured into irregular shaped blocks with variable size, whereas most of the montmorillonite-bearing rocks have polygons which are relatively consistent in size and shape. The majority of the fracture patterns observed in the nontronite-bearing outcrops are interpreted to be a result of unloading stresses. While the polygonal fractures developed in the montmorillonite-bearing layers appear to be a product of desiccation.