http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이우람,이춘규,Lee, Woo-Ram,Lee, Chun-Kyu 한국금형공학회 2022 한국금형공학회지 Vol.16 No.1
A lot of research is being done on metal materials to improve the lifespan of molded parts. As a result, excellent mold materials have been developed that withstand high hardness at high temperatures and frictional heat generated from high-speed cutting. In this study, the press mold life of powder high-speed tool steel and general high-speed tool steel was compared. Powdered high-speed steel is composed of alloying elements such as tungsten, maldividene, cobalt, chromium, and vanadium in steel, which improves wear resistance compared to high-hardness and high-speed tool steels. The mold parts of both steel types were manufactured in the same way from heat treatment to machining, and the powder high-speed tool steel was 66HRC and the high-speed tool steel was 61HRC. As a result of the experiment, it was observed that the number of punching of powder high-speed tool steel was improved by 40-50%, and powder high-speed tool steel had fewer impurities, uniform texture, and excellent surface structure. It has a microscopic structure.
저조도 합성 영상을 이용한 색 항등성 기법의 성능 분석
이우람(Woo-Ram Lee),전우경(Woo-Gyoung Jun),전병민(Byoung-Min Jun) 한국엔터테인먼트산업학회 2013 한국엔터테인먼트산업학회 학술대회 논문집 Vol.2013 No.11
영상을 입력으로 사용하는 여러 인식 및 검출 시스템에서 저조도 영상은 시스템의 성능 저하를 일으키는 원인이 된다. 이는 영상 형성 측면에서 보면 저조도 영상은 비 저조도 영상에 비해 큰 색 왜곡을 포함하기 때문이다. 저조도 영상의 색 왜곡 문제를 해결할 수 있는 해법 중의 하나가 색 항등성 기법이다. 본 논문에서는 저조도 환경에 적합한 색 항등성 기법을 분석하기 위하여 기존에 연구되었던 다양한 색 항등성 기법들을 대상으로 저조도 합성 영상 기반의 성능 평가를 수행한다. 합성 영상은 Barnard 데이터 셋 내의 광원 스펙트럼, 물체의 반사계수, 그리고 카메라 센서 반응 함수를 이용하여 생성되었고, 저조도 환경의 모델링을 위하여 부가 광원 효과를 추가하였다. 실험 영상은 구성된 장면에 따른 여러 셋으로 구성되었으며 각 셋에는 여러 저조도 조명으로부터 생성된 영상들이 포함된다. 또한, 성능 평가의 객관성을 위하여 rgb 공간에서의 유클리드 거리와 각 오차를 성능 평가 요소로 이용하였다.
이우람(Woo Ram Lee),이철구(Chul Ku Lee),김주한(Joo Han Kim) 대한기계학회 2011 大韓機械學會論文集A Vol.35 No.12
본 연구는 레이저를 이용한 스테인리스강의 용접성 평가에 대한 연구이다. 사용된 금속인 스테인리스 스틸은 녹 및 열적변형이 우수하여 다양한 적용 분야를 가지고 있다. 본 연구는 50 W 레이저 열원에 자기장을 적용하여 스테인리스 스틸에 기계적 성질을 향상 시키는데 목적을 두고 있다. 이에 따른 기계적 성질을 분석하기 위하여 수치적 해석, 인장강도, 형상 및 미세조직, 경도 시험 등을 수행하였다. 결과적으로 수치적 해석을 통한 금속 용융점에서의 속도 증가, 인장강도 약 16 ㎫ 상승, 용융부에 섞임, 경도 약 7 Hv 상승으로 기계적 성질이 향상 되었다. We have conducted a study on stainless steel laser-welding materials by using a laser beam for the evaluation. Stainless steel used in a rust and excellent thermal deformation has a variety of application. In this study, to improve the mechanical properties of stainless steel, a 50 W laser thermal source is used and magnetic fields are applied, on the basis of suggestions. The mechanical properties and performance are evaluated by performing a numerical analysis, tensile test, and shape, microstructure, and hardness test. The results show that the mechanical properties of improve increased speed the melting pool, tensile strength of 16 ㎪ rise, run into the melting zone and hardness 7 Hv.
이우람(Woo-Ram Lee),황동국(Dong-Guk Hwang),전병민(Byoung-Min Jun) 한국엔터테인먼트산업학회 2012 한국엔터테인먼트산업학회 학술대회 논문집 Vol.2012 No.11
광원의 영향이 미약한 저조도 환경에서 획득된 영상은 장면 및 물체의 정보를 제대로 표현하지 못하기 때문에 색 복원 기법을 적용한다. 하지만 색 복원 기법의 성능의 객관적인 평가는 물체의 원래 색을 포함하고 있는 기준 데이터(Ground truth data)의 부재로 인하여 수행의 어려움이 뒤따른다. 본 논문에서는 색 복원기법의 정량적인 성능 평가를 위한 저조도 합성 영상 생성 기법을 제안한다. 제안한 기법은 Barnard 데이터 셋의 스펙트럼 데이터들을 영상 형성식을 이용하여 합성하였고 잡음에 약한 저조도 영상의 특성을 고려하여 영상에 잡음을 추가하였다. 제안한 합성 기법을 통해 다양한 반사계수를 포함하고 있는 저조도 영상의 생성이 가능했으며, 각각이 결과 영상에 대한 기준 데이터 획득이 가능한 장점을 가진다.
이우람(Lee Woo-ram),이철구(Chul-Ku Lee),김주한(Joo-han Kim),박진성(Jin-Sung Park) 한국생산제조학회 2009 한국공작기계학회 추계학술대회논문집 Vol.2009 No.-
In this research we have performed some experiments to know the possibility of welding dissimilar materials using laser beam by adjusting the power output of 3kw laser. Other conditions of the experiments were as follows : the welding speed was varied in the range between 2m/min and 7m/min, argon gas and helium gas were used as shield gas, the flow value of shield gas was ranged between 101/min and 301/min, and the gap of two materials was ranged between 0㎜ and 0.3㎜. Ascertain the quality of the welded surface, we have done the tensile strength testing, the hardness testing and the microscope observation. As a result, we have found that tensils strength was the highest at the condition of the welding speed of 4, the flow value of 201/min, the gap of two materials 0, and the use of helium gas. Above testings have also showed that the tensile strength was generally satisfactory since the penetration of welding was almost complete due to the thinness of the materials. In addition, the formation of the welded area was excellent when it had the highest tensile strength.
Sc첨가가 가스분무법으로 제조된 Al-Si합금 분말 및 압출재의 특성에 미치는 효과
이우람(Woo-Ram Lee),김지훈(Ji Hoon Kim),김준호(Jun-Ho Kim),구자명(Ja-myoung Goo),이태행(Tae-Haeng Lee),홍순직(Soon-Jik Hong) 한국소성가공학회 2009 한국소성가공학회 학술대회 논문집 Vol.2009 No.10
In this research, the effect of Sc on the micro structure and mechanical properties of Al-20Si alloy powders and their extruded bar was investigated. The Al-20wt%Si and Al-20wt%Si-0.6wt%Sc powders were produced by gas atomization. The micro structures of the alloy powders and extrude was examined by optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The alloy powders were subsequently canned, degassed and extruded in order to produce the alloy bulk. It was found that the micro structure of the Al-20Si alloy powder was refined and the mechanical properties was significantly improved by the addition of 0.6Sc.
이우람(Lee Woo-ram),이철구(Chul-Ku Lee),김주한(Joo-han Kim),박진성(Jin-Sung Park) 한국생산제조학회 2009 한국생산제조시스템학회 학술발표대회 논문집 Vol.2009 No.10
In this research we have performed some experiments to know the possibility of welding dissimilar materials using laser beam by adjusting the power output of 3kw laser. Other conditions of the experiments were as follows : the welding speed was varied in the range between 2m/min and 7m/min, argon gas and helium gas were used as shield gas, the flow value of shield gas was ranged between 101/min and 301/min, and the gap of two materials was ranged between 0㎜ and 0.3㎜. Ascertain the quality of the welded surface, we have done the tensile strength testing, the hardness testing and the microscope observation. As a result, we have found that tensils strength was the highest at the condition of the welding speed of 4, the flow value of 201/min, the gap of two materials 0, and the use of helium gas. Above testings have also showed that the tensile strength was generally satisfactory since the penetration of welding was almost complete due to the thinness of the materials. In addition, the formation of the welded area was excellent when it had the highest tensile strength.
Simplified Horn 기법을 이용한 자연 영상에서의 얼굴 영역 검출
이우람(Lee, Woo-Ram),황동국(Hwang, Dong-Guk),전병민(Jun, Byoung-Min) 한국산학기술학회 2008 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 조명의 변화에 강건한 얼굴 검출 알고리즘을 제안한다. 영상내의 조명 성분을 줄이기 위하여 컬러 일관성(color constancy) 알고리즘 중 Simplified Horn 기법을 적용한 후 색 정보를 이용하 여 얼굴 후보영역을 결정한다. 이렇게 결정된 얼굴 후보영역 중 얼굴영역과 헤어영역의 여러 기하학적 인 정보를 이용하여 실제 얼굴 영역을 판단한다. 제안한 알고리즘은 다양한 조명 성분을 갖는 여러 영상에서 테스트 되었으며 높은 검출률을 보였다.