어두워진 실상과 밝혀진 허상

이선영(Lee, Sun Young) 한국예술종합학교 미술원 조형연구소 2013 Visual Vol.10 No.-

이예린의 작품은 군더더기 없이 단순명료한 인터페이스를 가지고 있지만, 내포적 다양성이 풍부하다. 대표적인 사진 작품들은 그림자이긴 하지만, 물에 비친 그림자이기에 거울 같은 반영상이다. 거기에는 재현의 기원이 되는 그림자와 거울의 모델이 동시에 작동한다. 배수가 잘 안되어 하수구로 빠져나가지 못한 물이 고여 생긴 이 순간의 연못은 다른 세상을 담는 틀이 되었다. 현실과의 최소한의 접점을 가지는 상상세계는 회화에서 극대화되고, 드로잉에서는 추상적 요소들로 분해되어 있지만, 사진 작업에서는 절묘한 균형을 이룬다. 현실과 상상은 이원론으로 완전히 분리되어 있기 보다는, 뫼비우스 띠처럼 연결된다. 모태 예술이었던 음악은 무의식과 몸속에 깊숙이 자리하며, 음악뿐 아니라 미술에서도 여러 장르를 두루 섭렵해온 작품은 공共감각적이다. 이예린의 작품 속 허상simulacre은 현실과 닮은 그림자eikônes와 닮지 않은 그림자phantasma가 모두 존재한다. 작가는 미술이라는 우회로를 통해서 순수한 생성의 세계에 가 닿으려고 한다. The works of Ye leen Lee feature simple and clear interfaces, while they imply abundant diversity. Her representative photo works show mirror-like shadows reflected on the surface of the water, embodying the origin of representation with shadows and mirrors. The pond or puddle made of stagnating water that failed to drain becomes a frame for another world. In the works of Lee, the imaginary world having minimal contact points with the reality becomes maximized in paintings, gets disassembled into abstract elements in drawings, and creates a subtle balance in photographs. However, the reality and the imagination are not separated by dualism but connected like a Möbius strip. Since the artist learned music from inside her mother’s womb, music is deeply rooted in her unconsciousness as well as in her body. The works of Lee are synesthetic, for she has experimented with diverse genres of art besides music. The simulacrum in her works contains both eikônes that is close to the reality and phantasm that is far from the reality. Using art as a detour, the artist attempts to reach a pure world of creation.

저융점 폴리에스터와 텐셀을 이용한 싸이로필사의 제조와 물성 분석

이선영,유재정,홍윤광,이시우,이승구,Lee, Sun-Young,Yoo, Jae-Jung,Hong, Yun-Kwang,Lee, Si-Woo,Lee, Seung-Goo 한국섬유공학회 2012 한국섬유공학회지 Vol.49 No.2

The purposes of this study were to manufacture sirofil yarn using tencel roving and low melting polyester filaments and to analyze the physical properties of sirofil yarns with yarn count, in order to develop composite yarn for high glossy and luxury textile fabrics. The surface morphology of sirofil yarn was observed with the SEM. Tensile and bending properties of sirofil yarn were examined with the yarn count. The tensile fracture of sirofil yarn was shown with a two-step process. Firstly, tencel yarn having low elongation was broken and then the low melting polyester filaments were fractured with very high elongation. Bending properties of sirofil yarn were measured with the KES-FB. The bending rigidity of sirofil yarn was between that of tencel spun yarn and that of low melting polyester. Also, the surface property of sirofil yarn was evaluated in terms of the hairiness coefficient. It was shown that stress, strain, bending rigidity, bending hysteresis and surface hairiness coefficient of sirofil yarn decreased as yarn count increased.

에틸렌옥사이드(Ethylene oxide)에 노출된 병원 근로자들의 소핵 빈도와 유전적 감수성 지표와의 연관성

이선영,김양지,최영주,이중원,이영현,신미연,김원,윤충식,김성균,정해원,Lee, Sun-Yeong,Kim, Yang-Jee,Choi, Young-Joo,Lee, Joong-Won,Lee, Young-Hyun,Shin, Mi-Yeon,Kim, Won,Yoon, Chung-Sik,Kim, Sung-Kyoon,Chung, Hai-Won 한국환경보건학회 2011 한국환경보건학회지 Vol.37 No.6

Objectives: Ethylene oxide (EtO) is classified as a human carcinogen, but EtO is still widely used to sterilize heat-sensitive materials in hospitals. Employees working around sterilizers are exposed to EtO after sterilization. The aim of the present study was to assess the exposure of EtO level, coupled with occupationally induced micronuclei from hospital workers. The influence of genetic polymorphisms of detoxifying genes (GSTT1 and GSTM1) and DNA repair genes (XRCC1 and XRCC3) on the frequencies of micronuclei in relation to exposure of EtO was also investigated. Methods: The study population was composed of 35 occupationally exposed workers to EtO, 18 student controls and 44 unexposed hospital controls in Korea. Exposure to EtO is measured by passive personal samplers. We analyzed the frequencies of micronuclei by performing cytokinesis-block micronucleus assay (CBMN assay) and GSTM1, GSTT1, XRCC1, and XRCC3 were also genotyped by performing polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Results: The frequencies of micronuclei in EtO exposure group, student controls and hospital controls were $18.00{\pm}7.73$, $10.47{\pm}7.96$ and $13.86{\pm}6.35$ respectively and their differences were statistically significant, but no significant differences according to the level of EtO were observed. There was a dose-response relationship between the frequencies of micronuclei and cumulative dose of EtO, but no significantly differences were observed. We also investigated the influence of genetic polymorphisms (GSTM1, GSTT1, XRCC1, and XRCC3) on the frequencies of micronuclei, but there were no differences in the frequencies of micronuclei by genetic polymorphisms. Conclusions: The frequencies of micronuclei in EtO exposure group was significantly higher than control groups. A dose-response relationship was found between the level of EtO exposure and the frequencies of micronuclei, but no statistically differences were observed. We also found that the frequencies of micronuclei were increased according to cumulative EtO level. There was no association of the genetic GSTM1, GSTT1, XRCC1, and XRCC3 state with the frequency of micronuclei induced by EtO exposure.

스펀본드 부직포의 흡음성에 대한 구조적 요인 효과 연구

이선영,이지은,변태웅,이승구,Lee, Sun Young,Lee, Ji Eun,Byun, Tae Woong,Lee, Seung Goo 한국섬유공학회 2015 한국섬유공학회지 Vol.52 No.6

Nonwovens have been proposed as a sound absorber in applications of home interior textile industry for effective noise control. Honeycomb cell blind textiles have been increasingly used in window covering for noise reduction. In this study, the effect of structural parameters of honeycomb cell-structured spunbond nonwoven on the sound absorption property was investigated. Spunbond nonwovens with various thicknesses, areal densities, and porosities were used, and they were joined in the form of a honeycomb cell structure with various cell widths and cell layering. The sound absorption property of the nonwoven improved with increasing thickness. The porosity of the nonwoven was shown to be proportional to the noise reduction coefficient (NRC). An increased air gap between two layers of the nonwoven shifted the maximum sound absorption coefficient toward a lower frequency range. The honeycomb cell structure was confirmed to contribute to an improvement of the sound absorption property. Layering of the honeycomb cell structure was also shown to be a critical factor in controlling the sound absorption property of the nonwoven.

아웃도어 스포츠웨어용 기능성 소재의 요구도 및 감성구조

이선영,김정화,이정순,Lee, Sun-Young,Kim, Jeong-Hwa,Lee, Jung-Soon 한국섬유공학회 2010 한국섬유공학회지 Vol.47 No.3

This study examined the needs and factors that help explain the subjective texture and image sensibility of functional fabrics for outdoor sportswear. Twenty one checklist questions on the needs of functional fabrics for outdoor sportswear were answered by 340 consumers. In addition 14 different types of commercial functional fabrics for outdoor sportswear were assessed subjectively. The dimensions evaluating the texture and image sensibility of functional fabrics for outdoor sportswear were also developed using the multi-dimensional scaling method. Water absorbing & quick drying, absorption, hand, durability, wind proof, price, easy-care and color were important parameters to choose functional fabrics for outdoor sportswear. The texture sensibility was explained by the following five factors, thickness, surface, elasticity, durability and luster, as well as by three dimension scales, elastic-lustrous, thick-thin and smooth-rough. The image sensibility could be explained by six factors, attractiveness, diversity, mildness, functionality, modernity and impact, as well as by three dimension scales, functional-attractive, simple-diverse and impact-comfortable. A better hand was found in functional fabrics for outdoor sportswear with a thick, smooth and elastic texture. A higher preference was found in functional fabrics for outdoor sportswear with a simple, active, comfortable, attractive and luxury image. The correlation coefficient between the hand and preference was 0.349.

유리 용해로 축열실 상재 하중 증가에 따른 Rider Arch의 안전성 검토

이선영,김종옥,임대영,김택남,박원규,Lee, Sun-Yung,Kim, Jong-Ock,Lim, Dae-Young,Kim, Taik-Nam,Park, Won-Kya 배재대학교 공학연구소 1997 공학논문집 Vol.2 No.1

유리용해로의 축열실은 폐연소가스로 열을저장하며, 유리용해로에 유입되는 흡입공기를 예열시키는 역할을 한다. 유리용해산업에서 연료소비를 줄이기 위하여 절연법, 단열벽돌, 공기누출등이 오래 연구되었다. 또한 새로운 형태의 단열벽돌과 Rider arch가 유리용해로의 수명연장을 위하여 연구되고 있다. 본 연구는 연구대상공장의 이전설치시 유리용해로의 축열실이 5.64m에서 7.89m로 높이가 높아졌고 이에 따른 축열실 하중증가에 의하여 Rider arch가 더 높은 응력을 받게 되었다. 이런 조건에서 Rider arch의 기계적 안정성을 본 연구에서 검토하였다. 계산식에 의하면 하중증가에 따른 Rider arch의 응력은 안정한 것으로 평가되었고 Rider arch가 견딜수 있는 최대 압축응력은 163kg/$cm^2$이고, 최대전단응력은 6.37kg/$cm^2$이다. The regenerator is important part of the glass melting furnace to increase the temperature of the intake air through the combustion flame. The insulation, checker brick, prevention of the air leak has been studied to decrease the fuel consumption in glass melting industries. Thus the new types of checker brick and the design of the rider arch has been studied to prolong the life of the glass melting furnace. The height of the regenerator increased from 5.64 m to 7.89 m in the reforming of the glass melting furnace. Thus the stability of the rider arch is studied under the condition of increased load of checker brick in this research. The rider arch was estimated to be stable inspite of the increase of load according to the calculation. The max. sustained compressive stress of the rider arch is 163 kg/$cm^2$ and the max. sustained shear stress is 6.37 kg/$cm^2$.

폴리우레탄으로 가교화한 탄소나노튜브 나노복합체의 합성과 특성

이선영,정용채,조재환,전병철,Lee, Sun-Young,Jung, Yong-Chae,Cho, Jae-Whan,Chun, Byoung-Chul 한국섬유공학회 2008 한국섬유공학회지 Vol.45 No.4

Polyurethane(PU)-crosslinked multi-walled carbon nanotubes(MWNTs) with different MWNTs content were synthesized, and their morphology and crystallization were investigated. The crosslinking of MWNTs with PU was achieved by reacting MWNTs treated chemically in the mixed acids with prepolymer obtained from a reaction of diisocyanate and polyol. The functioanlization of MWNTs with PU was confirmed by FT-IR, Raman, and XPS measurements, and their morphology was observed by SEM and TEM measurements. Optimum content of MWNTs for PU-crosslinked MWNTs was dependent on an amount of prepolymer and concentration of -OH group in MWNTs. The crystallinity of poly($\varepsilon$-caprolactone)-based PU decreased with an increase of MWNTs content, and it was ascribed to the confinement of crystallization of PCL molecules due to the crosslinking of PU with MWNTs.

일반인의 교정치료에 대한 지식수준, 태도에 대한 연구

이선영,Lee, Sun-Young 한국치위생학회 2012 한국치위생학회지 Vol.12 No.2

Objectives : The purpose of this study was to examine the knowledge of people in general about orthodontic treatment and their attitude to that by conducting a survey in a bid to provide information on the improvement of their incorrect awareness of orthodontics and on the development of clinical orthodontic treatment. Methods and Results : The subjects in this study were 389 people in general who resided in Seoul and Gyeonggi Province. A self-administered survey was conducted, and the findings of the study were as follows: 1. As for awareness of orthodontic treatment among the people in general by gender, the women knew better about orthodontic treatment than the men, and the gender gap was significant(p<0.05). 2. Concerning satisfaction with the shape and arrangement of the teeth by age, those who were in their 20s were most satisfied, and the teens were satisfied the least. There were significant gaps according to age (p<0.05). 3. As a result of checking the degree of their inconvenience about the use of chewing teeth by age, the people who were in their 30s felt the most inconvenience, and the gap between them and the others was significant(p<0.01). 4. As a result of asking them whether they had an intention to receive orthodontic treatment, the women had a more intention to do that than the men(p<0.001). By age, the younger respondents had a more intention, and the gaps between them and the others were significant(p<0.001). 5. As a result of analyzing their perception of the positives of orthodontics by gender, the women took a more positive view of it than the men, and their gap was significant(p<0.01). Conclusions : When orthodontic treatment or orthodontic treatment counseling is provided to orthodontic treatment patients or people in general in the field of clinical dentistry, it should be noted that the way patients and people in general look at orthodontic treatment is different according to their age and gender, and they should be informed of the positives of orthodontic treatment to step up the development of orthodontic treatment.

유비쿼터스 컴퓨팅 환경에서 데이터 마이닝을 이용한 서비스 조합

이선영,이종연,Lee Sun-Young,Lee Jong-Yun 한국정보처리학회 2006 정보처리학회논문지D Vol.13 No.4

유비쿼터스 컴퓨팅 환경에서 사용자가 원하는 서비스를 다양한 상황에 맞게 적합한 서비스를 검색하고 조합하여 제공하는 것은 중요한 일이다. 그러나 기존 연구는 주로 서비스 발견에 관한 연구이며 사용자의 위치냐 주변 환경, 선호도에 관한 고려가 부족하고, 사용자 정보를 이용하여 기본 서비스들로부터 새로운 조합 서비스를 찾아내는 것이 미흡하다. 또한 서비스 조합에 있어 기존 연구는 단순한 기본 서비스들의 나열에 불과하고, 사용 이력을 고려하기 위한 구체적 방안을 제시하지 않는다. 따라서 본 논문에서는 사용자의 상황 정보 및 서비스 사용 이력을 고려한 데이터 마이닝 기반 서비스 조합 기법을 제안한다. 세부적 연구내용은 첫째, 최적의 서비스를 동적으로 생성하여 제공하는 COSEP 프레임워크를 설계하고 둘째, COSEP 프레임워크에서 데이터 마이닝 기능을 겸비한 온톨로지를 이용한 서비스 조합 기법을 제안한다. 본 연구는 사용자의 상황 정보에 능동적으로 반응하여 서비스를 발견하고 데이터 마이닝 기법을 가진 온토롤지를 이용하여 서비스를 조합함으로써 사용자에게 최적의 서비스를 제공하는 것이다. Since users want to have services correctly in their own position and surrounding circumstance in ubiquitous computing environment, it is very important to search, compose basic services and provide suitable services according to various circumstances. However existing techniques have been studied on service discovery mainly and lack consideration for position or preference of users. Furthermore, on service composition, they lists basic services simply and do not propose concretely method of use service history data for service composition. Therefore we propose a framework for context-based service provisioning middleware system, called COSEP, and Ontology engine with data ming. This research discovers services by reacting dynamically to circumstance information such as time and position of user, composites services using Ontology engine with data ming and offers newly created optimal services to users.

Hybrid Capacitor의 전기화학적 특성 및 Hybrid Capacitor / Li-ion Battery의 펄스 방전 특성

이선영,김익준,문성인,김현수,Lee, Sun-Young,Kim, Ick-Jun,Moon, Seong-In,Kim, Hyun-Soo 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.12

In this study, we have prepared, as the pluse power source, a commercially supplied Li-ion battery with a capacity of 700 mAh and AC resistivity of 60 md at 1 kHz and nonaqeous asymmetric hybrid capacitor composed of an activated carbon cathode and MCMB anode, and have examined the electrochemical characteristics of hybrid capacitor and the pulse performances of parallel connected hybrid capacitor/Li-ion battery source. The nonaqueous asymmetric hybrid capacitors constituted with each stack number of pairs composed of the cathode, the porous separator and the anode electrode were housed in Al-laminated film cell. The 10 stacked hybrid capacitor, which was charged and discharged at a constant current at 0.25 $mA/cm^2$ between 3 and 4.3 V, has exhibited the capacitance of 108F and the lowest equivalent series resistance was 32 $m{\Omega}$ at 1 kHz. On the other hand, the enhanced run time of Li-ion battery assisted by the hybrid capacitor was obtained with increasing of current density and pulse width in Pulse mode. The best improvement, $84\;\%$ for hybrid capacitor/Li-ion battery was obtained in the condition of a 7C-rate pulse (100 msec)/0.5C-rate standby/$10\;\%$ duty cycle.