http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이동길(D.G. Lee),장경천(K.C. Jang),정민관(M.G. Jung) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.10
The influence of Niobium(Nb) contents and aging conditions on the strength and fatigue life of 18%Ni maraging steel commonly using in aircraft, space field, nuclear energy, and vehicle etc. were investigated. The yield strength was the highest about 1,800MPa in 0.06%Nb specimen having twice as much as the base metal specimen. Also, the elongation was the highest in 0.03%Nb specimen showing the same as base metal specimen. The higher aging temperature and the longer aging time, the fatigue life increased. On the other hand, the 0.03%Nb specimen showed the highest fatigue life which increased about 12% more than base metal specimen. 0.06% Nb specimen aged at 482℃ for 8 hours simultaneously satisfied the 250 grade strength and 200 grade elongation having the most superior mechanical properties.
광 분배기용 Fiber Array Block의 효율적 제조를 위한 전자동 배면 휠 연삭 시스템의 개발
김명호(M.H. Kim),이동길(D.G. Lee),최금(Kum Choi) 한국생산제조학회 2011 한국생산제조시스템학회 학술발표대회 논문집 Vol.2011 No.4
In this study, for the purpose of reducing the working hours of polishing process and preventing the mix of pollutants for optical splitter FAB(Fiber Array Block), which arrays and connects optical fiber to Planar Waveguide Devices (Chip), which is available to separate optical signal, the backside grinding method of grinding wheel and the automatic polishing machine into which FAB falls had been developed and applied to facilitate chip evacuation, unlike the upper surface grinding method of the conventional polishing pad. As a result, in case of multi bar chip(1ch×10×8ea), the 1st rough grinding at 350㎛ consumed four hours or more before but, now becomes to take less than three minutes to complete, and also prevent mixing of pollutants.
통신 시스템을 위한 병행 객체지향 프로그래밍 언어에 관한 연구
이준경(J.K.Lee),이동길(D.G.Lee),최완(W.Choi),최고봉(G.B.Choi),유재우(C.W.Yoo),송후봉(H.B.Song) 한국정보과학회 1994 한국정보과학회 학술발표논문집 Vol.21 No.2B
본 논문은 통신 시스템에 적합한 객체지향 프로그래밍 언어의 기능들을 제안하고자 한다. 대다수의 객체지향 언어는 추상지향을 기반으로 하지 않고 있으며, Ada-9X나 Oberon 등 소수의 객체지향 언어만이 패키지나 모듈을 이용한 추상기반 객체지향 언어를 제공하고 있기 때문이다. 여기서는 일반적인 객체지향 언어에서 다루는 기능들을 전반적으로 간략하게 소개하고, 프로그램의 추상적 파악 용이성 및 기존 객체지향 언어에서 발생할 수 있는 사용자 오류를 언어 설계 시 고려하여 프로그래밍 언어의 신뢰성을 높인 개선된 병행 객체지향 언어의 기능들을 제안하고자 한다.
CIM 탈지공정 중 오염방지를 위한 필터 및 연소장치 제작 연구
장경천(K.C. Jang),이동길(D.G. Lee),김명호(M.H. Kim),정민관(M.G. Jung) 한국생산제조학회 2009 한국공작기계학회 추계학술대회논문집 Vol.2009 No.-
본 연구는 일반적인 현장에서 CIM(Ceramic Injection Molding)을 위하여 혼합된 P, EVA, CB 등의 바인더가 탈지공정에서 대기 중으로 방출되는 배기가스로 인하여, 작업공간의 오염 및 작업자에게 유해하며 환경오염이 발생되는 문제점을 해소 하고자 탈지로의 흡/배기구에 필터장치 및 2차 연소장치를 고안하여 제작하도록 하였다. 또한 사출이 완료된 사출성형체는 탈지로에서 탈지공정을 거쳐 성형체가 되고 이를 소결로에서 소결을 실시 후 검사하면 외관상에 흑점이 약 6%정도 발생되고 흑점 발생분에 대해서는 전량 폐기를 하고 있는 실정이다. 이러한 오염에 대한 근본적인 원인을 분석한 결과 갈색과 청색상의 결함부는 금속계 불순물과 Zr계 산화물에 의한 오염으로 조사되었으며, 이와같은 문제 해결을 위해 선정한 필터링 시스템은 Mesh 0.3 ㎛의 HEPA Filter를 시용한 시스템을 설계 및 제작하였다. 연소시스템을 설치하여 가동을 수차례 실시한 결과 기존에 발생되던 그을음 및 악취는 전혀 발생되지 않았으며, HEPA Filter(mesh 0.3 ㎛)를 이용한 필터시스템을 설치한 후 불량률은 평균 1.980%로서 개선전 대비 4.316% 오염에 의한 불량률이 감소되어 매우 효율적인 결과를 나타내었다.