http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Load Ratio 해석에 의한 알루미늄 5083 합금 용접부의 J-R곡선 평가
윤한기,김연겸 대한용접접합학회 1997 대한용접·접합학회지 Vol.15 No.4
The purpose of this study is to evaluate the J-R curve characteristics for the 5083 aluminum alloy weldment by the load ratio analysis. The results of the load ratio analysis are compared with those of the J-R curve which are obtained by the ASTM unloading compliance method. The crack length calculated by the load ratio analysis is agrees well with the measured final crack length. The slope of the exponential J-R curve estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method. The exponential correlation of the J-R curve for the 5083 aluminum alloy base metal by the load ratio analysis is J = 93.88 ${\Delta}{\alpha}^{0.375}$. That for the weld metal and HAZ is J = 69.87 ${\Delta}{\alpha}^{0.389}$ and J = 70.59 ${\Delta}{\alpha}^{0.359}$ respectively. The J-R curve obtained by the ASTM unloading compliance method is overpredicted and should be offsetted due to the initial negative crack. On the other hand, the load ratio analysis method can evaluate the J-R curve by only load displacement curve without particular crack measurement equipment.
윤한기 東義大學校産業技術開發硏究所 1991 産業技術硏究誌 Vol.5 No.-
파괴현상은 재료에 따라 크게 다르다. 신소재 첨단재료로 주목 받고 있는 구조용화인세라믹스재와 종래의 금속재료를 비교해서 강도설계의 기준을 확립한다는 관점에서 파괴현상과 파괴특성의 문제점을 논한다. 구조용화인세라믹스의 파괴는 초기결함으로 부터 균열진전의 현상이 지배적이고 금속 재료는 소성변형에 지배하는 소성불안정의 문제와 파괴기구는 재료의사용 환경에 따라 다르다. 이와 같은 관점으로 부터 세라믹스재의 강도설계기준의 정립이 필요하다. 이러한 현상은 다른 신소재에서도 동일한 것으로 생각된다.
AE기법 이용한 JLF/STS304이종재료의 최적 마찰용접조건에 관한 연구
윤한기,이진경,이상필,공유식 한국비파괴검사학회 2003 한국비파괴검사학회지 Vol.23 No.2
저방사화 페라이트강인 JLF는 핵융합로의 블랑켓과 같은 열교환기의 재료로써 유용한 재료이다. 이 재료의 광범위한 적용을 위해서는 JLF강과 다른 재료와의 접합기술의 개발이 중요하다. 최근 두 이종재료간의 접합에는 마찰용접이 많이 이용되고 있으며 본 연구에서도 JLF강과 STS304 간의 마찰용접에 의한 용접특성을 평가하였으며 특히 비파괴기법중의 하나인 음향방출 기법을 이용하여 두 이종재료간의 용접특성 및 최적의 용접조건을 평가하였다. 음향방출 파라미터중의 하나인 카운트와 사상수 등이 최적용접조건 및 용접품질을 평가하는데 유효한 파라미터들이었다. Japanese low activation ferritic steel(JLF) is a good material for the parts of heat exchanger such as blanket and diverter. At first, JLF was developed as a candidate for structural materials in nuclear fusion applications. However, the development of the jointing technique of JLF steel to other materials is important for wide applications of this material to the industry fields. Recently the jointing technologies including diffusion bonding, brazing, roll bonding, explosive bonding and hot iso-static pressing have been studied for the heterogeneous materials of JLF-1 steel(Fe-9Cr-2W-V-Ta) and stainless steel(STS304). Friction welding is one of the most popular welding methods for two different kinds of materials. In this paper, the JLF-1 steel was jointed to STS304 by friction welding method and the optimal conditions of the friction welding discussed. Acoustic emission was used as a nondestructive technique to evaluate the weld quality in processing.