http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
범용 전문가 시스템 도구 구축을 위한 추론 시스템에 관한 연구
유정수(Jung Su Yoo),강현석(Hyun Syug Kang) 한국정보과학회 1987 한국정보과학회 학술발표논문집 Vol.14 No.1
다양한 전문 영역에 대해 지적인 능력을 보이는 범용 전문가 시스템 도구를 구축하기 위해서는 다양한 전문지식을 표현하고 습득할 수 있는 기법과 표현된 전문지식을 효율적으로 추론할 수 있는 강력한 추론 시스템이 필요하다. 본 논문에서는 전문 영역에 따라 효율적인 추론 방법을 사용자가 선택할 수 있도록 여러가지 추론 방법을 제안한다. 제안한 추론 시스템은 IBM MS-DOS 운영 체제에서 운용되는 mu-LISP86으로 구현하였다.
센터필라 적용을 위한 이종 접합강의 충격 특성 해석에 관한 연구
남기우(Ki Woo Nam),박상현(Sang Hyun Park),유정수(Jung Su Yoo),이상문(Sang Mun Lee) 대한기계학회 2012 大韓機械學會論文集A Vol.36 No.8
본 연구에서는 레이저 TWB로 용접된 이종재료의 동적 특성에 대한 해석이 수행되었다. 해석프로그램은 Hyper works 10.0으로 Solver는 LS-DYNA v.971, 모델링 요소는 2D-Shell, 요소 수는 35,641개, 노드 수는 36,561개이다. 충격속도는 10 ㎞/h이다. 상ㆍ하부의 용접선 높이에 따르는 영향을 연구하기 위하여, 하부의 길이를 300 ㎜와 400 ㎜로 하였다. 얻어진 결론은 다음과 같다. 길이 300 ㎜인 하부 재료 SPFC980의 변형은 가장 작고, 충돌 흡수 에너지는 가장 크다. 하부 냉연강 기준으로 TWB의 위치가 짧을수록 성능이 우수하게 나타났다. 즉, 상대적으로 상부 고강도강인 SABC1470 재료가 차지하는 비율에 따라 성능이 좌우되었다. 하부 재료 SPFH590은 큰 변형이 나타났고, 충돌성능은 SPFC980보다 현저히 떨어졌다. 따라서 충돌 성능 해석 결과에서 하부 재료 SPFC980인 길이 300 ㎜가 가장 우수한 것으로 나타났다. This study was carried out to analyze the dynamic characteristics of laser tailor-welded blanks (TWBs) made of dissimilar materials. The analysis was performed using Hyper Works 10.0 with Solver LS-DYNA v.971. 2D-Shell was used as the modeling element, and the number of elements and nodes was 35,641 and 36,561, respectively. The impact speed was 10 ㎞/h. To analyze the impact characteristics according to the height of the weld line for the upper and lower parts of the center pillar, the length of the lower part was set as 300 and 400 ㎜. When the lower part was made of SPFC980 steel with a length of 300 ㎜, the deformation was the smallest and the absorbed energy of the impact force was the largest. On based the lower part of center pillar, the position of TWB shows the shorter and the better value. In other words, the performance depended on the proportion of the upper part made of high-strength SABC1470 steel. A lower part made of SPFH590 steel showed large deformation. In contrast, a lower part made of SPFC980 steel showed significantly lesser deformation. Therefore, the impact performance of a lower part made of SPFC980 steel with a length of 300 ㎜ showed the best analysis result.
김익중(Ik-Joong Kim),장윤찬(Yun-Chan Jang),유정수(Jung-Su Yoo),백종현(Jong-Hyun Baek),김철만(Chul-Man Kim),김영표(Young-Pyo Kim) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
Recently, strain-based design and assessment(SBDA) method has been actively adopted to structural integrity of buried gas pipelines under ground movements. Large plastic deformation occus in pipe due to bending load, it shall be evaluated to simultaneously considering the possibility of tensile rupture and compression buckling. In this paper, various predictive formulas for calculating the allowable strain limit for gas pipelines and domestic applicability was reviewed.