http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탄소섬유시트로 보강된 콘크리트 기둥의 압축성능 평가를 위한 실험연구
유연종,김희철,이영학,이경훈,홍원기 한국구조물진단유지관리공학회 2008 한국구조물진단유지관리공학회 논문집 Vol.12 No.3
국내에서 공동주택이 대량으로 공급되었던 1980~1990년대에는 콘크리트의 설계기준강도가 약 18MPa로 낮았으며 또한 대부분의 기둥은 수직하중만을 고려하여 설계되었다. 본 연구에서는 수명이 오래된 콘크리트 기둥의 성능을 향상시키기 위하여 시공이 간편하고 내식성이 우수하며 인장성능이 매우 뛰어난 탄소섬유시트로 보강된 RC 기둥의 압축강도 성능평가 실험을 수행하였다. 기둥을 구속하는 탄소섬유시트의 wrapping 각도는 수직하중과 수평하중에 저항할 수 있도록 기둥의 재축방향에 대하여 ±60°각도로 보강하였다. 실험을 수행한 후 압축강도 및 변형률의 증가양상과 시험체의 파괴양상을 분석하였으며 실험결과의 회귀분석을 수행하여 향상된 압축강도를 예측할 수 있는 회귀식을 작성하였다. In 1980 and 1990's most of residential buildings were constructed with relatively low strength concrete of 18 MPa. And, columns were designed considering only vertical loads. In this study, compressive strength tests for low strength RC columns retrofitted by carbon fiber sheets were carried out. Carbon fiber sheet provides constructability and high tensile strength as well as good corrosion resistance characteristics. A pair of carbon sheets were wrapped with ±60° angle with respect to longitudinal direction of RC column to increase structural capacity against axial and lateral load simultaneously. Strength and strain patterns and failure modes of specimens were analyzed and prediction equation of increased compressive strength of RC column confined by carbon fiber sheet was proposed based on regression analysis.
탄소섬유시트와 비좌굴 가새를 이용한 저층 필로티 구조물의 보-기둥 연결부의 횡방향 보강효과에 관한 실험적 연구
서상훈,유연종,이영학,김희철,이기학,이한선 한국지진공학회 2009 한국지진공학회논문집 Vol.13 No.1
본 연구의 목적은 일정 축하중과 반복횡하중 하에서 탄소섬유시트와 비좌굴 가새로 보강된 보-기둥 시험체의 횡방향 거동 평가를 통하여 사용된 보강 방법의 구조적 성능을 검증하는 것이다. 세 개의 시험체를 비보강, 탄소섬유보강, 탄소섬유와 비좌굴 가새 보강 방법을 각각 적용하여 제작하였다. 변위에 따른 최대, 최소하중은 하중-변위 관계를 분석함으로써 평가되어지며, 하중과 강성의 관계는 비교구간의 유효강성 분석에 의해 평가된다. 실험의 수행 결과, 보강을 하지 않은 시험체에 비하여 보강을 적용한 시험체는 최대허용하중과 유효강성, 철근 항복 시 재하 횡하중, 변위연성비 등에서 상대적으로 우수한 성능을 보였다. The purpose of this study is to evaluate the structural capacities of beam-column specimens retrofitted with CFRP sheet and BRB (Buckling-Restrained Brace) under sustained axial and cyclic lateral loads. Three specimens were made using different retrofitting methods : non-retrofitted, retrofitted with CFRP sheets only, and retrofitted with both CFRP sheet and BRB systems. Lateral load resistant capacities were evaluated based on the load-displacement relations. From the results, the maximum lateral forces of the FRP sheet retrofitted and both the FRP and BRB retrofitted specimens showed approximately 34% and 138% improvement, respectively, compared with the non-retrofitted specimen.
건설안전분야 : 기계식 고압과 저압을 혼용한 에폭시 주입 콘크리트의 휨강도 검토 사례 연구
홍기남 ( Ki Nam Hong ),유연종 ( Yeon Jong Yu ),이강문 ( Kang Moon Lee ),류창열 ( Chang Yeol Ryu ),윤홍수 ( Hong Su Yoon ) 한국안전학회(구-한국산업안전학회) 2012 한국안전학회지 Vol.27 No.1
The objective of this study is to investigate the capacity of epoxy injection method using low pressure mixed with high pressure. Injection depth test and flexural strength test were respectively performed on 40 × 45 × 35 cm and 100 × 10 × 40 cm specimens. Considered as the test variables were injection type(low pressure, low and high pressure), crack width(0.25 mm, 0.50 mm), injection direction(upper, lower, side), and epoxy viscosity(low, medium, high). Test results showed that low viscosity epoxy injection depth of injector using low pressure mixed with high pressure for upper direction were 23 cm and tension strength of crack face repaired by injector using low pressure mixed with high pressure was larger than that of concrete
탄소섬유시트와 비좌굴 가새로 보강한 기둥의 횡방향 거동평가를 위한 실험적 연구
서상훈(Seo Sang-Hoon),유연종(Yoo Youn-Jong),이영학(Lee Young-Hak),김희철(Kim Hee-Cheul),이한선(Lee Han-Seon),이기학(Lee Ki-Hak) 대한건축학회 2008 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.28 No.1(구조계)
The purpose of this study aims to examine flexural behavior of beam-column specimen retrofitted by CFRP sheet and BRE (Buckling-Restrained Brace) under constant axial and cyclic lateral loads. Three specimens were made with different retrofitting methods: CFRP sheets only and CFRP sheet and BRB systems. Load and displacement capacity was evaluated by comparing load-displacement relations. Lateral load resistant capacities were estimated in terms of the effective stiffness.