http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저품위 석회석이 원료밀의 분쇄성과 시멘트 클링커 소성성에 미치는 영향
유동우,박태균,최상민,이창현,Yoo, Dong-Woo,Park, Tae-Gyun,Choi, Sang-Min,Lee, Chang-Hyun 한국건설순환자원학회 2021 한국건설순환자원학회지 Vol.9 No.1
시멘트의 주 원료인 시멘트 클링커는 주원료로서 석회석을 사용하여 제조되며, 석회석의 품위에 따라 부원료의 사용이 변화되고, 시멘트 클링커의 생산에도 큰 영향을 미치게 된다. 본 연구에서는 시멘트 클링커 원료인 석회석의 CaO 함량의 변화가 Raw Mill 분쇄성과 시멘트 클링커의 소성성에 미치는 영향성을 파악하기 위하여, 석회석 CaO 함량을 변화시킨 조합원료의 분쇄시간 측정으로 분쇄성을 비교 검토하였고, 분쇄된 조합원료를 1350~1500℃의 범위에서 소성하여 소성성 지수 계산에 의한 시멘트 클링커의 소성성을 파악하였다. 석회석의 품위가 낮을수록 조합원료의 분쇄성은 저하하였고, 석회석의 CaO 함량이 낮을수록 소성온도에 따른 F-CaO의 변화가 크게 나타났다. 그에 따라 높은 B.I. 값이 계산되어, 낮은 시멘트 클링커 소성성을 나타내었다. 또한, 시멘트 클링커의 광물분석 결과에서는 소성온도의 증가로 F-CaO 값이 저하하는 경우, Belite 함량의 감소와 그에 따른 Alite 함량의 증가가 관찰되었다. Alite의 경우 석회석 CaO 함량이 증가함에 따라 R형의 비율은 감소하고 M형의 비율이 증가하였다. The cement clinker, the main raw material of cement, is manufactured using limestone as the main material. Depending on the quality of limestone, the use of subsidiary materials changes, and has a great influence on the production of cement clinkers. In this study, the effect of CaO content of limestone, a cement clinker material, on Raw Mill grinding and sintering of cement clinker was investigated. The grinding time of the union materials changed in the content of limestone CaO was measured to identify the grinding properties. The raw material combination was cleaned within a range of 1,350-1,500℃. The sintering performance of cement clinker by Burnability index calculation was identified. The lower the grade of limestone, the lower the grinding quality of the raw material combination. The lower the CaO content of limestone, the greater the variation in F-CaO for sintering temperature. The lower the class of limestone, the higher B. I. value was calculated, indicating the lower cement clinker sintering. In addition, the mineral analysis results of cement clinker showed that if the F-CaO value was low due to the increase in sintering temperature, the Belite content decreased and the Alite content increased. In the case of Alite, the ratio of R-type decreased and that of M-type increased as the content of limestone CaO increased.
유동우,최현국,이승헌,이세진,Yoo, Dong-Woo,Choi, Hyun-Kook,Lee, Seung-Heun,Lee, Se-Jin 한국건설순환자원학회 2011 한국건설순환자원학회지 Vol.6 No.2
본 연구에서는 현재 시멘트 콘크리트 혼합재로서 널리 사용되고 있는 고로수쇄 슬래그와 애쉬의 페이스트 유동특성을 파악하였다. 그 방법으로 혼합재 단독을 사용한 페이스트의 유동특성을 파악하여, 아래와 같은 결론을 얻을 수 있었다. 혼합재 단독의 페이스트 유동특성을 시험하기 위하여, 3종류의 분쇄기를 사용하여 3가지 입도로 분쇄된 분말을 제조하였다. 이 분말을 Rosin-Rammler 분포식을 사용하여 얻은 계수 n 값과 De 값을 유동특성과 비교 분석한 결과에서, 일반적으로 같은 입경 크기 일 때 Ash 분말이 Slag 분말보다 소성점도 및 항복응력이 높았으며, 또한 동일 n 값에서 Ash 분말이 Slag 분말 보다 비교적 높은 소성점도와 항복응력을 나타내었으나, 입도분포 폭의 변화에는 Slag 분말이 Ash 분말 보다 민감한 유동특성의 변화 경향을 나타내었다. This study examined rheological properties of blast furnace slag and ash paste that are widely used as cement concrete for mineral admixture in current. In that way rheological properties of the paste of mineral admixture only was examined. The result of this study were as follow: In order to analyze that the rheological properties of the mineral admixture only, fine particles were produced with grinding machine to 3 particle sizes. These powders in general from the result of comparison with and analysis of rheological properties and the coefficient n and De values. The result that ash powder was higher in plastic viscosity and yield stress than Slag powder, and with the same n value, ash powder showed higher plastic viscosity and yield stress than Slag powder. But Slag powder in particle size distribution showed a sensitive tendency on changing in rheological properties.
Local Government Startup Supporting Policy
Yoo, Dongwoo(유동우) 한국지방정부학회 2018 지방정부연구 Vol.22 No.3
본 논문은 지방정부의 창업지원정책을 경제학적으로 분석한다. 창업지원 정책의 효율성을 분석하기 위하여, 시차가 있는 극대화 모형과 게임이론을 사용하였다. 분석결과, 불확실성이 존재할 경우, “단순히 보조금 수령하기” 전략이 “기업을 성실하게 운영하기” 전략에 대하여 지배전략으로 나타났다. 불확실성은 창업자에게 더 많은 예비적 저축을 하게 만들고, 지원기간동안 보다 적은 자원을 기업에 사용하도록 하였다. 연구결과 적은 비용의 파산제도와 같은 사회안전망을 통하여 불확실성을 줄이는 것이 창업정책의 문제점을 개선할 수 있을 것으로 분석되었다. This paper analyzes local government startup supporting policy through the lens of economic principles. To analyze the effectiveness of supporting policy, the paper employs inter-temporal maximization and a game theory. The analysis indicates that with uncertainty “simply receiving subsidy” is a dominant strategy over “sincerely operating a firm”. The existence of uncertainty induces more pre-cautionary savings; thus a new businessman uses less resources for the firm during the supporting period. The analysis also suggests that reducing the uncertainty through a social safety net, for example low cost bankruptcy, can improve current problems of supporting programs.
리트벨트법에 의한 석탄재를 적용한 시멘트 클링커의 소성 온도별 광물 정량분석
유동우(Dong-Woo Yoo),임영진(Young-Jin Im),박태균(Tae-Gyun Park),이창현(Chang-Hyun Lee) 한국건설순환자원학회 2020 한국건설순환자원학회 논문집 Vol.8 No.4
본 연구에서는 시멘트 클링커의 원료 중 점토성분의 일부를 석탄재로 대체하여 시멘트 클링커를 각 온도별로 소성하여 시멘트 클링커의 광물상의 변화를 XRD-Rietveld법을 이용하여 정량분석하였다. 시멘트 클링커의 소성온도가 증가할수록 Belite의 양은 감소하고 Alite의 양은 증가하였으며, 유리 CaO의 양도 감소 되었다. Alite와 Belite의 형태는 1450℃ 이상에서부터 형태를 구분 할 수 있었으며. 1500℃ 소성에서는 결정의 크기가 조대하게 성장하여, 과소성이 진행된 것으로 판단된다. 유리 CaO의 경우 소성온도의 상승에 따라 감소하였고, 1450℃ 이상에서 0.5% 이하로 나타나, 1450℃ 이상에서는 충분한 소성이 이루어진 것으로 판단된다. 따라서 시멘트 클링커의 원료 중 알루미나질과 철질 원료의 화학성분 공급원으로서 석탄재의 활용이 가능한 것이 판단되었다. In this study, cement clinkers were sintered at each temperature by replacing some of the clay components of cement clinkers with coal materials. The mineral phase change of sintered cement clinker was quantitatively analyzed by XRD-Rietveld method. As the sintering temperature of cement clinker increased, the amount of beltie decreased, the amount of alite increased, and the amount of free-CaO decreased. The form of alite and belite could be distinguished at sintering temperature of 1450°C or higher. The crystal size was greatly increased at 1500°C sintering. It was confirmed that the excessive sintering was progressed. Free-CaO decreased with the increase of sintering temperature. At 1450°C or higher, it was less than 0.5%. In 1450°C or greater, it is determined that enough sintering is included. Therefore, the application of fly ash as a raw material of cement clinker was judged to be usable as a source of chemical components of alumina and iron raw materials.