http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오세민(Semin Oh),전다은(Daeun Jeon),곽영신(Youngshin Kwak) 한국색채학회 2013 한국색채학회 학술대회 Vol.2013 No.10
본 연구에서는 조명의 연색성 변화가 색 감성에 미치는 영향을 알아보기 위해 실험을 진행하였다. 조명은 조도와 색온도가 동일하고, 분광분포가 다른 4가지의 조명으로 구성하였고, 연색성은 CIE CRI 8색 컬러와 CQS 15색 컬러를 조합하여 총 22개의 컬러 패치를 대상으로 평가하였다. 조명의 연색성 변화가 색 감성에 미치는 영향을 조사하기 위해 ‘Warm-Cool’, ‘Heavy-Light’, ‘Modern-Classic’, ‘Clean-Dirty’, ‘Active-Passive’, ‘Hard-Soft’, ‘Tense-Relaxed’, ‘Fresh-Stale’, ‘Masculine-Feminine’, ‘Like-Dislike’ 10개의 형용사 쌍에 대한 색 감성을 평가하였다. 실험 결과 조명의 연색성이 변함에 따라 시각적인 색 인지 차이가 있어도 색 인지 변화 방향으로의 두드러진 감성 변화는 일어나지 않았다.
오세민(SeMin Oh),곽영신(YoungShin Kwak),김성필(SungPhil Kim),김차중(ChaJoong Kim),최진숙(JinSuk Choi) 한국색채학회 2015 한국색채학회 논문집 Vol.29 No.1
본 연구에서는, 실제 주거 공간처럼 꾸며 놓은 공간에서 공간 전체를 활용하여 실험을 진행하였다. 실험은 휴식이라는 특정 시나리오 아래에서 진행되었으며, 총 3개의 다른 초기 조명 조건에서 실험 참가자들이 조도와 색온도를 조절하여 휴식에 적합한 조명을 직접 고르는 방식으로 진행되었다. 이때, 초기 조명 조건이 실험 참가자들이 고른 조명색에 미치는 영향에 대해서 조사해 보았다. 또한 반복성 실험을 통해 실험 참가자들의 응답의 일관성을 조사해 보았다. 본 연구의 결과는 다음과 같았다. 먼저 반복성 실험의 경우, 색온도의 결과는 반복 횟수에 따라서 일관적인 결과를 보였다. 반면 조도의 경우에는, 반복 횟수에 따라서 상대적으로 일관적이지 않은 결과를 보였다. 초기 조명 조건에 따른 조도와 색온도 분석 결과, 색온도의 경우. 초기 조명 조건에 관계없이 비교적 일정한 결과를 보였다. 조도의 경우에도 초기 조명 조건에 큰 영향을 받은 것으로 보이지는 않으나, 초기 조명 조건의 조도가 높을 때 상대적으로 더 높게 설정되는 것을 알 수 있었다. 또한, 선호되는 조도의 경우 색온도보다 변화폭이 더 큰 것을 알 수 있었다. In this research, the experiment was done in the place which was set as a real home. Under the scenario of relaxation, there were 3 different pre-adaptation lighting conditions and each participant selected the lighting which was the most preferred by changing illuminance and color temperature. Also, the experiment was repeated per each pre-adaptation lighting condition to check the consistency. Findings of this research are as follows: In case of repetition experiment, the result of color temperature showed relatively good consistency. However, the result of illuminance showed relatively low consistency. In case of the effect of pre-adaptation lighting condition, the result of color temperature were almost constant according to pre-adaptation lighting condition. The results of illuminance was also shown almost constant according to pre-adaptation lighting condition, but it was set relatively higher as the illuminance of the pre-adaptation lighting was higher. Also it is found that the preferred illuminance levels were more diverse than the preferred color temperatures.
BIM 기반 시뮬레이션 모델의 상호운용성을 이용한 건물 에너지 성능평가
오세민(Oh Se-Min),김영진(Kim Young-Jin),박철수(Park Cheol-Soo),김인한(Kim In-Han) 대한건축학회 2011 대한건축학회논문집 Vol.27 No.6
The use of BIM-based energy performance assessment during the design stages is believed to be essential to achieve energy-conscious green buildings. Interoperability between BIM-based design tools and energy performance analysis tools enables information exchange between different applications. BIM-based simulation models are used to evualate various design alternatives and achieve energy conscious green design. However, BIM interoperability is still controversial in design phase of a building project. This paper presents a detailed investigation and comparative study of the differences between data-centric interoperability and process-driven interoperability approaches. The authors elaborate on aforementioned two approaches, summarize their consequences, and present a real application of the DAI (Design Analysis Integration) prototype to a building in the conceptual design stage. The selected building is a library building with a floor area 8,000㎡. Three design alternatives of the building in a conceptual design stage were studied. In order to analyze interoperability results between BIM-based CAD applications and building energy analysis tools, Revit Architecture and EnergyPlus were selected. In particular, the authors developed an automatic data translation from gbXML to IDF in MATLAB GUI (Graphical User Interface). This paper shows that meaningful information can be delivered to DM(Decision Maker) based on the process-driven interoperability using BIM.
벽체 결로 하자 사례와 시뮬레이션을 통한 결로 방지 성능 평가 방법 개선방안
오세민(Semin Oh),김유리(Yuri Kim),박선효(Sunhyo Park),정광섭(KwangSub Joung) 대한설비공학회 2016 대한설비공학회 학술발표대회논문집 Vol.2016 No.6
There are main issues of defect type that condensation, concrete crack and noise in multi-residential house. Especially, according to the ADDMC(Apartment Defect Dispute Mediation Committee) at MLIT(Ministry of Land Infrastructure and Transport) in Korea, condensation defects are great importance(16 percent) on whole number of reported cases of faults from 2010 to 2014 in Korea. Most condensation defects have many different causes that take a toll on the resident"s life and space. So it is very important to early detection and repair. For preventing the condensation in multi-residential house, there are standard guidelines in Korea such as "Standard of a Design for Preventing the Condensation in Multi-Residential House". This research aims to study on the evaluation and improvement of preventing the condensation aforementioned korea standard. This paper analyze type and characteristics(opaque wall) of cause of occurrence and existing state condensation defect from evaluation of real application 100 case in 2014 ADDMC data. In additions to a sample TDR(Temperature Difference Ratio) simulation data in corners of building envelop was selected for this study.