http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
붕적층 지반에 적용된 터널에서 강재의 지보효과에 대한 연구
안성율,이재영,안경철,Ahn, Sung-Youll,Lee, Jae-Young,Ahn, Kyung-Chul 한국터널지하공간학회 2006 터널기술 Vol.8 No.1
최근 부각되고 있는 환경친화적인 설계의 결과로서 터널 입출구의 구조물이 연약한 지반(붕적층) 에 불가피하게 건설 되곤 한다. 그런 터널 공사의 경우, 주변 지반뿐만 아니라 라이닝 지보재의 충분한 지지력을 확보해야 한다. 이와 관련하여, 높은 강성을 갖는 H형 강지보재가 라이닝을 지지하기 위해 흔히 사용되었다. 그러나 수치해석에 의한 구조적인 안정성을 평가하는데 있어서 그 효과는 무시되는 젓이 관례였다. 본 연구에서는 붕적층에 적용된 터널에 대하여 강지보재로 사용된 H형강을 수치해석 모델에서 강성 적용을 0%, 50%, 75%, 100%로 반영하여 3차원 유한요소해석을 수행하였고, 각 강성 적용율에 따른 숏크리트 용력 감소효과를 비교 검토하였다. 수치해석으로부터 얻어진 데이터는 현장계측결과와 비교하였다, 연구 결과로부터 강지보재의 숏크리트에 대한 효과가 검증되었고 적절한 강성률은 50~75%의 범위 내에서 적절한 것으로 판단되었다. The entrance and the exit structures of tunnels are often constructed on unfavorably soft soils (colluvial soils) as a result of environment-friendly design highlighted in recent years. For construction of such a tunnel, it is essential to secure sufficient bearing capacity of the lining supports as well as that of the surrounding soils. In this regard, H-shape steel-ribs with high stiffness are commonly used for lining supports. However, it was the past convention to ignore the effect of the steel-ribs in numerical evaluation of the structural safety. This study is intended to show how the shotcrete stresses are relieved by the steelribs, on the basis of numerical data obtained from 3-dimensional finite element analysis. The effect of steel ribs to shotcrete stresses is examined at different levels of application rates, i.e., 0%, 50%, 75% and 100% of the total stiffness. The data obtained from numerical analysis was compared with in-situ measurement. The effect of st eel ribs to shotcrete stresses was verified and appropriate total stiffness was proposed in the range of 50%~75%.
접속도로에 적용된 보강토 구조물의 거동 특성과 설계 적용 사례
안성율(SungYoull Ahn),정경식(GueungSik Jung),최항석(Hangseok Choi),김주현(Kim Ju Hyun) 한국지반신소재학회 2014 한국토목섬유학회 학술발표회 Vol.2014 No.11
The Geo-Grid reinforced wall structures have been oftenly used for a road or site. But, if this method was constructed at the approach, there have to be considered that the length of the grid, the surface of the failure, and the tying method between the block and the grid. this study proposed the design method to be able to decide the length, the failure surface, and the method of binding block and grid.
유한요소법을 이용한 보강재 강성별 p-q분석에 의한 설계 특성 연구
안성율(SungYoull Ahn),정경식(GeungSick Jeung) 한국지반신소재학회 2014 한국토목섬유학회 학술발표회 Vol.2014 No.4
It is prevalent to considerate as the factors of design for reinforcing grid in tension, chemical characteristic, damage, and creep. However, these factors are not to reflect the deformation or bowing to be caused by the elongation of the variable geogrid products. When the rigidity of reinforcing grid used as input parameter in a Finite Element Method, the horizontal displacement is bigger as the elongation increase. It is restricted on the bowing by horizontal displacement that usually accepted tolerance for faces of reinforcing walls is 20mm per 4.5m in British Code of practice for strengthened/reinforced soils and other fills(BSi). In the p-q diagram analysis, the point which a loading step contact to failure envelope is forward comparison the load step for grid elongation 7% to that for 13%. Therefore, it is suggested that the elongation of geogrid as reinforcing structures in retaining walls forcing must become a factor of reinforced earth structure as result from this FEM deformation analysis and p-q diagram.
공급공기의 온도 변화와 수증기가 바이오매스 가스화 과정에서 전환가스의 발열량에 미치는 영향
안성율(Ahn, Seong-Yool),문철언(Mun, Cheol-Eon),최경민(Choi, Gyung-Min),김덕줄(Kim, Duck-Jool) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
An experimental study was carried out to investigate the heat value change by various conditions of wood sawdust gasification in the 1-dimensional downdraft flow fixed bed gasifier. The preheated air and steam were used as a gasifying agent. The components of syngas were influenced increasing residence time of supplied agent. The operating parameters, the supplied agent temperature and steam addition were used. The oxidizer temperature was varied from 500K to 620K. The gasification process was monitored by measuring temperature at three points near the biomass using R-type thermocouples and the syngas composition was analyzed by gas chromatograph. We get the sample gas at the end of gasifier. Finally, the amount of hydrogen and methane were increased widely as increasing the oxidizer temperature and adding steam.
안성율(Ahn, Sungyoull),이강주(Lee, Gahng-Ju),한진태(Han, Jin-Tae) 대한건축학회 2023 대한건축학회 학술발표대회 논문집 Vol.43 No.1
The purpose of this study is to analyze the interrelations the Khd(Groud Spring constant) using G/Gmax(Ground Response Analysis Modulas Ratio) to calculate the design earthquake earth pressure acting on the underground building structure using ground response analysis when calculating the design earth pressure according to the recently changed KDS related to underground structures and earthquakes (KDS 41 19, KDS 41 17). The ground properties input in the earthquake response analysis are based on the ground response analysis considering the nonlinearity of G/Gmax. Ground amplification displacement can be overestimated by the earth pressure calculated as the value corresponding to G and the ground reaction force coefficient Gmax.
공기의 온도와 수증기가 목재 톱밥의 가스화에 미치는 영향
안성율(Seong-Yool Ahn),최경민(Gyoung-Min Choi),김덕줄(Duck-Jool Kim) 한국연소학회 2007 KOSCOSYMPOSIUM논문집 Vol.- No.-
An experimental study was carried out to investigate gasification process of wood sawdust in the 1-dimensional downdraft fixed bed gasifier. The preheated air which was used oxidizer and steam were used as a gasifying agent. The downdraft fixed bed gasifier obtains more amount of hydrogen and methane by increasing residence time of supplied air. The operating parameters, the supplied air temperature and steam were used. The oxidizer temperature was varied from 500K to 620K and vapor was added. The gasification process was monitored by measuring temperature at three position near the biomass using R-type thermocouples and the syngas composition was analyzed by gas chromatograph. We get the sample gas at the end of gasifier and it was eonugh time to finishing the chemical reaction. Finally, the amount of hydrogen and methane were increased widely as increasing the oxidizer temperature and adding steam.
바이오매스 가스화 과정에서의 온도와 가습의 변화가 전환가스 조성에 미치는 영향
안성율(Seong-Yool Ahn),최경민(Gyung-Min Choi),김덕줄(Duck-Jool Kim) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.5
An experimental study was carried out to investigate gasification process of wood sawdust in the 1-dimensional downdraft fixed bed gasifier. The preheated air was used oxidizer and steam were used as a gasifying agent. The operating parameters, the supplied air temperature and steam were used. The oxidizer temperature was varied from 500K to 620K and vapor was added. The gasification process was monitored by measuring temperature at three position near the biomass using -type thermocouples and the syngas composition was analyzed by gas chromatograph. The change of hydrogen and carbon monoxide, carbon dioxide, methane was observed. Overall, the volume fraction of hydrogen and methane were increased widely as increasing the oxidizer temperature and adding steam.
안성율(Seongyool Ahn),박영수(Yeongsu Park),홍세윤(Seyoon Hong),박종혁(Jonghyeok Park),이명옥(Myungok Lee),성호진(Hojin Sung) 한국환경에너지공학회 2023 한국열환경공학회 학술대회지 Vol.2023 No.2
온실 가스 규제로 인한 산업 기반 대전환에 따라 탄소 기반의 기존 산업에서 수소 기반의 산업으로 전환되는 과도기에 접어들고 있으나, 이러한 변화는 많은 시간과 경제적 문제를 해결해야 한다. 이러한 과도기에서 기존 탄소 기반의 산업계를 효율적으로 활용하는 문제를 잘 해결해야 하며, 탄소 기반 자원의 고갈 문제 역시 해결해야 한다. 셰일 오일 기술은 이러한 탄소 기반 산업의 자원 고갈 문제를 해결할 수 있는 방법의 하나로 많은 연구가 진행되고 있으나, 국내 연구는 거의 없는 실정이다. 본 연구에서는 셰일 오일 추출 과정에서 FWKO 앞단에서 고체 형상의 불순물을 제거하기 위한 Desander의 배출수를 재순환하여 사이클론 하단부에 직접 분사하여 , 내부 vortex 형성 및 입자 분리 효율이 어떻게 변화하는지에 대한 연구를 FLUENT를 이용한 전산 수치해석을 통하여 진행하였다. 전산 수치해석의 모델 검증을 위해서 기존 논문의 데이터를 이용하였으며, 주요 형상 변수에 따른 입자 제거 효율을 점검하였다.
사이클론 desander의 inner-inlet 형상 변화에 의한 입자 제거 효율 변화 분석
안성율(Seongyool Ahn),박영수(Yeongsu Park),홍세윤(Seyoon Hong),박종혁(Jonghyeok Park),이명옥(Myungok Lee),성호진(Hojin Sung) 한국환경에너지공학회 2023 한국열환경공학회 학술대회지 Vol.2023 No.2
온실 가스 문제는 전 세계적으로 해결해야 하는 숙제이며, 모든 국가에서 이를 규제하기 위한 움직임을 가져가고 있다. 하지만, 탄소 기반의 산업 체계가 구축된 현 시점에서 완전한 탈탄소 사회 사이를 연결할 수 있는 최소한의 온실가스를 배출하는 기술의 개 발 또한 필요하다. 자원의 고갈 문제를 겪었던 석유의 경우, 셰일 오일 기 술의 개발로 향후 에너지 페러다임의 전환까지 자원 고갈 문제를 해결할 수 있게 하였다. 본 연구에서는 셰일 오일 추출 과정에서 FWKO 앞단에서 고체 형상의 불순물을 제거하기 위한 Desander의 내부 유도에 inner-inlet을 추가함에 따라 입자 크기에 따른 분리 효율을 분석하기 위하여 FLUENT를 이용하여 전산 수치해석을 진행하였다. 전산 수치해석의 모델 검증을 위해서 기존 논문의 데이터를 이용하였으며, 주요 형상 변수에 따른 입자 제거 효율을 점검하였다.