http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고출력 CW Nd:YAG 레이저를 이용한 인코넬 718 판재 절단시 모서리부 절단 특성 분석
안동규,변경원,Ahn, Dong-Gyu,Byun, Kyung-Won 대한용접접합학회 2008 대한용접·접합학회지 Vol.26 No.5
The objective of this paper is to investigate the effects of the laser power, the material thickness, comer angles, and the loop size on the formation of the comer in the cutting of Inconel 718 super-alloy sheet using high-power CW Nd: YAG laser. In order to investigate the influence of comer angles and loop sizes on the melted area and the formation of comer in the sharp comer, angular cutting tests and loop cutting tests were carried out. The results of the angular cutting tests were shown that the melted area is minimized and the melting mode is changed from nose melting in the thickness direction to the secondary melting induced by the attached dross when the comer angle is $90^{\circ}$. Through the results of loop cutting tests, the variation of the melted area and the comer shape in the sharp comer according to the loop size were examined. In addition, it was shown that a proper loop size is approximately 3 mm. The results of above experiments will be reflected on the knowledge base to generate optimal cutting path of the laser.
고출력 CW Nd:YAG 레이저를 이용한 저탄소 냉연강판 절단시 모서리부 절단 특성 분석
안동규,유영태,Ahn, Dong-Gyu,Yoo, Young-Tae 대한용접접합학회 2006 대한용접·접합학회지 Vol.24 No.4
The objective of present research works is to investigate the effects of process parameters, including the power of laser, cutting speed, material thickness, and the edge angle, on the melted area in the sharp edge of the cut material fur the case of cutting of a low carbon steel sheet using high-power CW Nd:YAG laser. In order to investigate the influence of edge angle and size of loop on the melted area in the sharp edge, angular cutting tests and loop cutting tests have been carried out. From the results of angular cutting tests, the relationship between the edge angle and the melted area has been obtained. The results of the experiments have been shown that the melted area is rapidly reduced from $120^{\circ}$ of the edge angle and the melted area is nearly zero at $150^{\circ}$ of the edge angle. Through the results of loop cutting experiments, the relationship between the cutting angle on the melted area in the edge according to the size of loop have been obtained. In addition, it has been shown that a proper size of loop is nearly 3 mm as the corner angle is greater than $90^{\circ}$ and 5 mm as the comer angle is less than $90^{\circ}$. The results of above experiments will be reflected on the knowledge base to generate optimal cutting path of the laser.
3 차원 사출성형 해석을 통한 컴퓨터 마우스 제작용 이중사출성형 금형의 공정조건 결정
안동규(Dong Gyu Ahn),박민우(Min Woo Park),박정우(Jeong Woo Park),김형수(Hyung Su Kim) 대한기계학회 2011 大韓機械學會論文集A Vol.35 No.12
본 논문의 목적은 3 차원 사출성형 해석을 통하여 컴퓨터 마우스 제작용 이중사출성형 금형의 공정조건을 결정하는 것이다. 적합한 사출성형 공정조건을 선정하기 위하여 사출 시간, 최대 사출압력 및 보압 시간이 사출성형 특성과 제품 품질에 미치는 영향을 정량적으로 고찰하였다. 사출성형 해석 결과로부터 제품의 수축과 휨 변형을 최소화 할 수 있는 최적 사출성형 공정조건을 예측하였다. 최종적으로 사출성형 실험을 수행하여 이종재료로 구성된 컴퓨터 마우스 제품을 제작하였다. 이 결과로부터 선정한 사출성형 공정조건을 적용할 경우 적절한 이종 재료로 구성된 컴퓨터 마우스가 제작될 수 있음을 알 수 있었다. The objective of this study determine the molding conditions of a double-shot injection mold for fabricating a computer mouse using different materials, by performing three-dimensional injection molding analysis. In order to select the optical injection molding conditions, the effects of the injection time, the maximum injection pressure, the effect of packing time on the injection molding characteristics, and the product qualities were quantitatively examined. From the results of the injection molding analysis, the optimal injection molding conditions of the double-shot injection mold, which leads the molded product to the minimized shrinkage and deflection, were estimated. The results of the injection molding experiments, showed that an appropriate computer mouse can be fabricated using different materials when the identified optimal injection molding conditions are adopted.
연속파형 Nd:YAG 레이저를 이용한 Inconel 718 판재 절단시 모서리부 생성 특성 고찰
안동규(Dong-Gyu Ahn),변경원(Kyung-Won Byun),유영태(Young-Tae Yoo) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
The objective of this paper is to investigate into the formation of the sharp comer according to process parameters and comer angles in the cutting of Inconel 718 sheet using CW Nd:YAG laser. In order to examine the effects of comer angles and the size of loop on the melted area in the sharp comer, several angular and loop cutting experiments were performed using a six-axis controlled automatic robot cutting system. The results of angular cutting experiments showed that the melted area is minimized at 90° of the comer angle. In addition, the results of the loop cutting experiments showed that the melted area rapidly decreases to nearly zero when the comer angle is greater than 3 ㎜ and the comer angle is 90°.
3 차원 사출성형 해석을 통한 냉장고 플라스틱 서랍 제작용 사출성형 금형의 형상적응형 냉각수로 설계
안동규(Dong Gyu Ahn),박민우(Min Woo Park),박승화(Seung Hwa Park),김형수(Hyung Su Kim) 대한기계학회 2010 大韓機械學會論文集A Vol.34 No.10
본 논문의 목적은 3 차원 사출성형해석을 통한 냉장고 플라스틱 서랍 제작용 사출성형 금형의 형상적응형 냉각수로 설계이다. 바람직한 형상적응형 냉각수로의 설계를 얻기 위하여 형상적응형 냉각수로의 직경과 위치가 사출성형 특성과 제품의 품질에 미치는 영향을 정량적으로 고찰하였다. 해석결과로부터 제품의 균일 냉각과 변형 최소화가 가능한 최적의 형상적응형 냉각수로의 설계를 도출할 수 있었다. 본 연구에서 제안된 사출성형 금형과 기존의 직선형 냉각수로의 사출성형 금형을 냉각/제품 제작 시간 및 제품 품질 측면에서 비교한 결과, 형상적응형 냉각수로를 가진 사출성형 금형이 제품의 생산성과 품질을 동시에 향상시킬 수 있음을 알 수 있었다. The objective of this study is to design the conformal cooling channels for the mould of a plastic drawer of a refrigerator by analysis of three-dimensional injection molding. In order to obtain the desired design of the conformal cooling channels, the influence of the diameter and the position of the conformal cooling channels on the moulding characteristics and the product qualities were quantitatively examined. From the results of the examination, an optimal design of the conformal cooling channels, which ensures uniform cooling and minimum potential deformation of the molded drawers, was estimated. By comparing the designed mould and a conventional mould with linear cooling channels from the viewpoints of the product qualities as well as cooling and cycle times, it was shown that the mould with conformal cooling channels can simultaneously improve the productivity of the injection moulding process and the product qualities.
안동규(Dong-Gyu Ahn),조창규(Chang-Gyu Cho),정상화(Sang-Hwa Jeong),이동기(Dong-Gi Lee) Korean Society for Precision Engineering 2011 한국정밀공학회지 Vol.28 No.2
The objective of this paper is to investigate into the design of photbioreactor for mass production of microalgae. Characteristics of previously developed photobioreactors were examined to obtain design factors, including light transfer, fluid dynamics and metabolic reactions, of the photobioreactor. Design technology of components related to the design factors, such as light sources, photobioreactor cases, spargers, mixer, etc., was discussed to improve the viability and the growth rate of microalgal and productivity of the photobioreactor. Finally a principle direction of the design for an airlift flat plane photobiorectors was investigated.
Mold Flow를 이용한 박벽 케이스 제작용 사출성형 금형 설계
안동규(Dong-Gyu Ahn),김대원(Dae-Won Kim),박상오(Sang-Oh Park) 한국기계가공학회 2007 한국기계가공학회 춘추계학술대회 논문집 Vol.2007 No.-
The objective of this research work is to design the injection mould for thin walled parts and to investigate the influence of process parameters on the quality of the molded part using the Mold Flow. The type of the runner and gate is selected as a design parameter of the mould. The injection time, the injection pressure, the temperature of the injection material, and the cooling time are selected as process parameters to obtain an optimum injection condition. From the result of the analysis for each design condition of the mould, it has been shown that an insufficient filling does not occur when the mixed type of the runner system with a hot runner and a cold runner is introduced. In addition, the nozzle type of the hot runner and the optimum design of the cold runner have been found. The effects of process parameters on the shrinkage rate of the molding part has been performed using the result of analysis for each combination of process parameters.
부분적으로 후육부를 가지는 평판형 제품의 제작을 위한 사출성형 금형의 냉각채널 설계에 관한 연구
안동규(Dong-Gyu Ahn),박민우(Min-Woo Park),김형수(Hyung-Soo Kim) Korean Society for Precision Engineering 2012 한국정밀공학회지 Vol.29 No.8
The shrinkage and the warpage of the moulded part are influenced by the design of the product and injection mould. In a flat part with a partly thick volume, the warpage of the flat part is created from the difference of the shrinkage between thin and thick regions. The warpage of the flat part with a partly thick volume can be reduced by a proper design of the cooling system in the injection mould. The goal of this paper is to design properly cooling channels of injection mould to manufacture a flat part with a partly thick volume. The conformal cooling channel is adopted to improve cooling characteristics of a region with the thick volume. The linear cooling channels are assigned to the other region. The proper design of the conformal cooling channels is obtained from three-dimensional injection molding analysis for various design alternatives. The moulding characteristics of the designed mould with both conformal and linear cooling channels are compared to those of the mould with linear cooling channels from viewpoints of temperature, shrinkage and warpage of the moulded part using numerical analysis. Injection mould with both conformal and linear cooling channels for the flat part with a partially thick volume is fabricated. In addition, injection moulding experiments are performed using the fabricated mould. From the results of the injection moulding experiments, it has been shown that the designed mould can successfully fabricate the flat part with a partially thick volume.