http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
1단 수평보강 곡선 플레이트거더의 보강재 휨강성에 대한 예비 연구
만경록,박용명,김병준,씨에청청 한국강구조학회 2019 韓國鋼構造學會 論文集 Vol.31 No.6
본 연구에서는 강재 곡선거더에서 수평보강재로 웨브 1단 보강 시 보강재 필요 휨강성을 평가하였다. 곡선거더는 곡률로 인해 휨 거동이 직선거더와는 다르므로 대부분의 교량설계기준에서는 수평보강재가 곡률중심 쪽(내측) 또는 반대쪽(외측)에 설치되는경우를 구분하여 보강재의 필요 휨강성을 제시하고 있다. 직선거더 대비 곡선거더에서 보강재 필요 휨강성은 재료 및 기하비선형해석으로부터 평가하였다. 항복강도 355 MPa 강재거더에 대해 웨브 패널의 형상비, 곡률반경, 보강재의 위치(내측 또는 외측)를 매개변수로 고려하였으며, 곡선거더에서 보강재의 필요 휨강성은 직선거더와 동등한 수준의 휨강도가 얻어질 때로 설정하였다. 해석결과에 근거하여 AASHTO LRFD 교량 설계기준 대비 수평보강재의 휨강성에 대해 수정된 식을 잠정적으로 제안하였다. The bending rigidity required of longitudinal stiffeners in curved steel girders stiffened with single stiffener was investigated. Bending behaviour of curved girder is different with that of straight girder due to curvature. Therefore, most bridge design specifications stipulate the required bending rigidity of the stiffeners for the cases where the stiffener is on the side of the web toward(inside) or away(outside) from the center of curvature, separately. The required bending rigidity in curved girders versus straight girders was evaluated through material and geometric nonlinear analysis. Yield strength of 355 MPa steel was considered and aspect ratio of web panel, radius of curvature, and location of stiffeners(inside or outside) were included as major parameters. The bending rigidity of the stiffeners required in the curved girder was assumed when the same level of flexural strength in straight girder is obtained. Based on the numerical results, a modified equation for the bending rigidity of the longitudinal stiffeners against AASHTO LRFD bridge design specifications was tentatively proposed.