http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
심상훈(Sang Hoon Shim),송정수(Jung Soo Song),윤기봉(Kee Bong Yoon),최송천(Song Chun Choi),김지윤(Ji-Yoon Kim) 대한기계학회 2002 대한기계학회 춘추학술대회 Vol.2002 No.3
During the last decade, effort has been made for reducing maintenance cost for aged equipment s and ensuring safety, efficiency and profitability of petrochemical and refinery plants. Hence, it was required to develop advanced methods which meet this need. RBI(Risk Based Inspection) methodology is one of the most promising technology satisfying the requirements in the field of integrity management. In this study, a quantitative assessment algorithm for RBI based on the API 581 code was reconstructed for developing an RBI software. The user-friendly rea/RBI software is developed with a module for evaluating quantitative risk and financial risk using the potential consequence and the likelihood. Also, inspection planning module for inspection time and inspection method are included in it.
스테레오 매칭 기반 깊이 추정 AI 모델 보안 취약점에 관한 연구
심상훈(Shim Sang Hoon),주경호(Joo Kyungho),이동훈(Lee Dong Hoon) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
딥러닝을 활용한 영상정보 기반 깊이 추정 알고리즘은 무인이동체의 주행을 위한 카메라 센서 정보를 해석하는 데 사용되고 있다. 하지만 깊이 추정 딥러닝 모델의 보안 취약점은 무인이동체가 실제로 활용되는 데 있어 큰 문제가 될 수 있다. 본 논문에서는 무인이동체에서 영상정보를 처리하기 위해 사용하는 스테레오 매칭 알고리즘에 대한 적대적 공격연구를 제시한다. 깊이 추정에 대한 적대적 공격 목적에 알맞은 손실 함수를 정의하고 그레디언트 기반 적대적 공격기법들을 적용하여 객체의 거리를 잘못 인식하도록 한다. 또한, 공격 강도 변화에 따른 공격 목표 거리 성공률을 확인하여 공격기법 간 성능을 비교 분석한다.
RBI 소프트웨어 개발 및 국내 석유화학 플랜트에의 적용사례
심상훈(Sang Hoon Shim),한상인(Sang In Han),윤기봉(Kee Bong Yoon) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
During the last ten years, the need has been increased for reducing maintenance cost for aged equipments and ensuring safety, efficiency and profitability of petrochemical and refinery plants. RBI(Risk Based Inspection) methodology is one of the most promising technologies satisfying the need in the field of integrity management. In this study, a user-friendly software, realRBI for RBI based on the API 581 code was developed and a quantitative analysis was performed for over 500 equipments in a domestic plant whose operating time reaches about 13 years. Current risks for cach equipment parts were evaluated and risk based prioritization were determined as a conclusion.
한정석(JEONG SEOK HAN),심상훈(SANG HOON SHIM),전은상(EUN SANG JEON),고유진(YU JIN KOH),사와이 란세츠(ransetsu Sawai),김효선(HYO SUN KIM) 한국HCI학회 2014 한국HCI학회 학술대회 Vol.2014 No.2
본 연구에서는 현재 대학교 도서관 웹사이트에서 제공하는 서비스에 대한 사용자들의 불만 사항을 알아보고, 검색 서비스 경험에 대한 사용자의 만족도를 높이고자 설문과 인터뷰를 실시하였다. 설문과 인터뷰를 통해서 사람들이 선호하는 검색창의 위치 및 메뉴 항목 그리고 인터페이스에 관하여 알아보았다. 그리고 그 결과를 바탕으로 이용자들이 어떤 요소들을 더 선호하는지 분석하였다. 본 연구의 결과는 대학교 도서관의 검색 서비스를 설계할 시 고려해야 할 사항을 발견할 수 있다는 것에 의의가 있으며, 향후 현존하는 도서관 웹사이트들의 개선에 도움이 될 것이다. We surveyed and interviewed university students to find out the way that increasing user experience satisfaction and to recognize what does make users uncomfortable while university students use library web sites. And we studied about search bar, menu tab and overall interface that people prefers. With the results of survey and interview, we figured out what are the factors that makes users more comfortable. This paper suggests some points to consider when designing library web service and this study would be helpful when service providers improve their web sites.
CuCrFeMnNi 용접재료를 적용한 rolled high-entropy alloys의 GTA 용접성 평가
남현빈(Hyunbin Nam),박상현(Sanghyun Park),심상훈(Sang Hoon Shim),나영상(Youngsang Na),송상우(Sangwoo Song),홍순익(Sun Ig Hong),강남현(Namhyun Kang) 대한용접·접합학회 2021 대한용접학회 특별강연 및 학술발표대회 개요집 Vol.2021 No.11
최근 고엔트로피합금은 구조용 강재를 대체할 수 있는 재료로 각광받고 있다. 신재료인 고엔트로피합금의 강도 및 극저온/고온특성을 향상시키기 위하여 많은 연구가 진행되고 있으나, 상용화를 위하여 필수적으로 수행되어야 하는 용접성 평가과 관련된 연구는 현저하게 부족한 실정이다. 고엔트로피합금의 용접성과 관련된 연구는 LBW 및 FSW 등의 저입열 용접에서 주로 수행되었으나, 최근에는 고입열 용접인 GTAW를 통한 연구도 발표되고 있다. 특히, CoCrFeMnNi 고엔트로피합금에서는 용접열에 의한 상변태가 발생되지 않으므로 용접부의 각 영역별(BM/HAZ/WM) 결정립도가 용접성을 결정한다. 용접 시, 용접열에 의해 WM의 결정립도가 모재보다 조대화되어 인장파단이 WM에서 발생되므로 용접부의 강화를 위하여 WM의 결정립도를 미세화시킬 필요가 있다. 따라서 본 연구에서는 용접부의 결정립 미세화를 위하여 Cu가 대체된 고인트로피합금 용접재료를 개발하여 용접성을 평가하였다. Cu-rich phases의 생성으로 인하여 CuCrFeMnNi 용접부의 결정립도 보다 CoCrFeMnNi 용접부의 결정립도가 더 미세한 것으로 확인되었으며, 이로 인하여 기계적 특성 또한 CuCrFeMnNi 용접부가 더 우수한 결과를 보였다.
Q-응력을 이용한 휜 광폭평판 균열부 구속상태 변화 평가
이휘승(Hwee-Sueng Lee),허남수(Nam-Su Huh),김기석(Ki-Seok Kim),심상훈(Sang-Hoon Shim),조우연(Woo-Yeon Cho) 대한기계학회 2014 大韓機械學會論文集A Vol.38 No.12
본 논문에서는 휜 광폭평판의 두께와 폭, 균열길이 그리고 가공경화지수의 변화가 휜 광폭평판의 균열부 구속상태에 미치는 영향을 평가하였다. 이를 위해 5가지의 휜 광폭평판 두께, 3가지의 균열길이, 3가지의 휜 광폭평판 폭 그리고 3가지의 가공경화지수를 고려한 3차원 탄소성 유한요소해석을 수행하였다. Ramberg-Osgood 관계식을 만족하는 비선형 재료로 가정하였으며 균열부 구속상태를 정량화하기 위해서 Q-응력을 이용하였다. 3차원 유한요소해석 결과를 바탕으로 기하학적 형상 및 재료특성에 따른 휜 광폭평판의 Q-응력 변화를 평가하였다. 평가 결과 면외 구속조건에 의한 영향은 면내 구속조건과 밀접한 관계가 있었으며, 면외 구속조건이 면내 구속조건 보다 균열부 구속상태에 더 큰 영향을 미쳤다. In the present paper, the effects of the thickness and width of a curved wide-plate, the crack length, and the strain hardening exponent on the crack-tip constraint of the curved wide-plate were investigated. To accomplish this, detailed three-dimensional elastic-plastic finite element (FE) analyses were performed considering various geometric and material variables. The material was characterized by the Ramberg-Osgood relationship, and the Q-stress was employed as a crack-tip constraint parameter. Based on the present FE results, the variations in the Q-stress of the curved wide-plate with the geometric variables and material properties were evaluated. This revealed that the effect of out-of-plane constraint conditions on the crack-tip constraint was closely related to the in-plane constraint conditions, and out-of-plane constraint conditions affected the crack-tip constraint more than in-plane constraint conditions.
홍성기(Seong-Ki Hong),장강원(Gang-Won Jang),심상훈(Sang Hoon Shim) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
A lightweight RTGC (Rubber-Tyred Gantry Crane) with high structural stiffness is designed by applying topology and shape optimization. Start ing from a design domain which is very simplified from an existing model, a new layout for RTGC is obtained through topology optimizat ion by maximizing static and dynamic stiffness of the structure while the mass usage is given as the design constraint. Because the design domain for topology optimization is mostly discretized by using solid elements, the optimized result should be approximated to have plate and beam members through post-process, during which the performance loss of the optimized result might happen. To avoid this, shape and thickness optimization are subsequently conducted for the post -processed RTGC. By using the morphing technique of the commercial optimizat ion software, Optistruct, the optimum profiles for the legs and the girder of the crane as well as their optimum thicknesses can be obtained. As a result, the finally-optimized crane can have a 9.1% reduced mass from the original model without sacrificing structural stiffness.