http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
HVOF 용사법으로 제조된 WC-20%CrC-7%NiCr 코팅의 고온산화연구
송기오,Narita Toship,윤재홍,조동율,주윤곤,방위,윤석조,황순영,정길봉 한국표면공학회 2007 한국표면공학회 학술발표회 초록집 Vol.2007 No.-
최근 사회전반에 걸쳐 사용되어온 경질 Cr 코팅이 제조 시 발암물질로 알려져 있는 Cr??을 발생함에 따라 이를 대체할 수 있는 표면개질법이 대두되고 있다. 또한 경질 Cr 코팅은 일반적으로 200℃의 온도에서부터 경도가 서서히 감소되며 400℃ 이상에서는 사용하기 어려운 제한점이 있다. 따라서 이 이상의 고온 안정성을 가지는 우수한 표면개질법에 관한 연구가 활발히 진행되고 있다.
송기오,최나희,정혁구 한밭대학교 2008 한밭대학교 논문집 Vol.6 No.1
본 논문은 부호율 (code rate) 이 1/2 이고, 구속장(Constraint length) 이 K=3 인 Viterbi decoder FPGA 설계에 관한 것이다. 복호기는 Verilog HDL로 설계한 후, Model Technology사의 ModelSim SE PLUS 5.7f를 이용하여 관련 회로를 시뮬레이션 한다. 경판정 복호화를 사용하며, ACS module에서 2개의 나비구조를 병렬로 구성하였다. In this paper, we designed Viterbi decoder FPGA which is utilizing code rate 1/2 and constraint length, K=3. We designd the decoder by using the Verilog HDL(Verilog Hardware Description Language) and simulated the decoder by using ModelSim SE PLUS 5.7f of Model Technology. We used hard decision criterion method and the Add Compare Select module which is composed of two butterf!y structure in parallel.
MB-OFDM 시스템의 기저대역 성능 평가에 관한 연구
송기오,정혁구 한밭대학교 2010 한밭대학교 논문집 Vol.8 No.1
본 연구에서는 최근 기존의 통신 시스템에 비해 넓은 대역폭을 사용하는 UWB 무선 전송 기술을 이용하여 고속의 데이터 전송률 (53.5Mbps~480Mbps)을 갖는 WPAN을 위해 WiMedia Alliance가 제안한 MB-OFDM 시스템에 대하여 분석하고, 이론적인 AWGN 환경의 성능과 제안된 UWB 채널 환경인 IEEE 802.15.SG3a UWB 채널 모델에서 MB-OFDM 시스템의 성능을 모의 실험을 통하여 분석한다.
송기오,윤재홍,이찬규,신기삼,이선호,엄기원,이종욱,김인수,조동율 대한금속·재료학회 2008 METALS AND MATERIALS International Vol.14 No.6
Current supercritical steam power plants operate at 3,600 psi and 1,000℉. If the steam temperature is raised from 1,000℉ (538℃) to 1,150℉ (621℃), the efficiency increases by 2 %. Therefore, study on the high temperature corrosion of power plant materials under ultra-supercritical conditions (USC) is necessary to protect the plant from corrosion. In this study, valve materials of 17 % Cr martensitic steels (17Cr steel), Incoloy 901 (I901) and their surface nitrided specimens were exposed to USC of 621℃ and 3600 psi (255 kg/cm²) steam for 200℃ , 400℃, and 800 h. The oxidation of both 17Cr steel and I901 under the USC for 800 h is very small due to the formation of a protective thin oxide layer formation on the surface. The USC oxidation of both nitrided specimens were increased due to the decomposition and formation of active nitrogen from the non protective nitrides such as Fe₄N, Fe₂-₃N, and CrN. The oxidation of nitrided 17Cr steel (n17Cr steel) is about two times higher compared to nitrided I901 (nI901). The surface hardness is improved by more than two times near the surface by nitriding, and the degradation of hardness by USC oxidation is rapid for n17Cr steel, but slow for nI901.