http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
NO<sub>2</sub> 감지용 SnO<sub>2</sub> 후막소자의 제작 및 특성
손종락,한종수,Sohn, Jong Rack,Han, Jong Soo 한국공업화학회 1997 공업화학 Vol.8 No.2
$NO_2$기체의 감지를 위한 sensor의 원료물질로 $SnO_2$를 사용하였으며 $SnCl_4$ 용액을 암모니아수로 침전시킨 후 공기중에 하소하여 $SnO_2$를 제조하였다. $SnO_2$의 특성을 XRD 및 IR로 연구하였으며 스크린-프린팅법으로 $SnO_2$후막소자를 제작하였다. 하소온도가 높을수록 $SnO_2$의 입자의 크기는 결정의 성장으로 증가하였다. $1000^{\circ}C$에서 하소된 $SnO_2$분말을 가지고 만든 소자를 $700^{\circ}C$에서 열처리하여 제작된 $SnO_2$소자는 동작온도 $250^{\circ}C$에서 $NO_2$기체에 대한 우수한 감지특성과 선택성을 나타내었다. $SnO_2$ as raw material of sensor for $NO_2$ detection was prepared by precipitating $SnCl_4$ solution with aqueous ammonia followed by calcining in air. The characterization of $SnO_2$ was carried out using FT-IR and XRD, and $SnO_2$ thick film sensor was fabricated by screen-printing method. The particle size of $SnO_2$ calcined at higher temperature increased due to the growth of crystalline. $SnO_2$ sensor fabricated by using $SnO_2$ sample calcined at $1000^{\circ}C$ followed by heat treatment at $700^{\circ}C$ exhibited excellent sensing characteristics and selectivity for $NO_2$ gas at the operating temperature of $250^{\circ}C$.
손종락,한종수 ( Jong Rack Sohn,Jong Soo Han ) 한국공업화학회 1997 공업화학 Vol.8 No.2
NO₂기체의 감지를 위한 sensor의 원료물질로 SnO₂를 사용하였으며 SnCl₄ 용액을 암모니아수로 침전시킨 후 공기중에 하소하여 SnO₂를 제조하였다. SnO₂의 특성을 XRD 및 IR로 연구하였으며 스크린-프린팅법으로 SnO₂후막소자를 제작하였다. 하소온도가 높을수록 SnO₂의 입자의 크기는 결정의 성장으로 증가하였다. 1000℃에서 하소된 SnO₂분말을 가지고 만든 소자를 700℃에서 열처리하여 제작된 SnO₂ 소자는 동작온도 250℃에서 NO₂기체에 대한 우수한 감지특성과 선택성을 나타내었다. SnO₂ as raw material of sensor for NO₂ detection was prepared by precipitating SnCl₄ solution with aqueous ammonia followed by calcining in air. The characterization of SnO₂ was carried out using FT-IR and XRD, and SnO₂ thick film sensor was fabricated by screen-printing method. The paticle size of SnO₂ calcined at higher temperature increased due to the growth of crystalline. SnO₂ sensor fabricated by using SnO₂ sample calcined at 1000℃ followed by heat treatment at 700℃ exhibited excellent sensing characteristics and selectivity for NO₂ gas at the operating temperature of 250℃.
Zirconia 에 담지된 산화크롬 촉매의 구조 및 열적 성질
손종락,배영일,류삼곤 한국화학공학회 1992 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.30 No.5
분말의 Zr(OH)₄를 (NH₄)₂CrO₄수용액에 함침시킨 후 공기 중에 소성하여 Zirconia에 담지된 산화크롬 촉매를 제조하였다. 제조된 촉매의 구조와 열적 성질을 XRD와 DT-TGA로 연구한 결과 산화크롬이 존재함으로 말미암아 zirconia의 무정형에서 tetragonal phase 그리고 tetragonal phase에서 monoclinic phase로 되는 상전이가 크롬함량에 비례하여 억제되었다. 산화크롬과 zirconia간의 상호작용으로 산화크롬은 zirconia 표면에 잘 분산되었으며, 그 결과로 α-Cr₂O₃ 결정은 900℃ 이상의 소성온도에서만 관찰되었다. Chromium oxide/zirconia catalysts were prepared by dry impregnation of powdered Zr(OH)₄ with aqueous solution of (NH₄)₂CrO₄ followed by calcining in air. The structures and thermal properties of prepared catalysts were investigated using XRD and DT-TGA. On the basis of the results obtained from X-ray diffraction and DTA for chromium oxide/zirconia, it was suggested that the presence of chromium oxide delayed the transitions of zirconia from amorphous to tetragonal phase and from tetragonal to monoclinic phase in proportion to the chromium oxide content. Chromium oxide was well dispersed on the surface of zirconia due to the strong interaction between chromium oxide and zirconia, and consequently α-Cr₂O₃ crystalline was observed only at calcination temperature above 900℃.