http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유기재배 배 과수원에서 그물망과 정향유 처리가 큰검정풍뎅이 방제에 미치는 영향
서호진,최으뜸,송장훈,Seo, Ho-Jin,Choi, Eu Ddeum,Song, Janghoon 한국응용곤충학회 2019 한국응용곤충학회지 Vol.58 No.2
본 연구는 배 유기재배 과수원에서 그물망과 정향유물을 처리하였을 때 큰검정풍뎅이에 의한 잎 피해를 예방할 수 있는지 확인하고자 수행되었다. 2017년 6월 하순에 보성과 함평의 배 과수원에서 그물망, 그물망 + 정향유, 무처리구 등 3처리구를 두고 큰검정풍뎅이 밀도와 잎 피해율을 조사하였다. 또한 그물망 설치 위치를 달리하여 과수원 외부, 평덕시설의 상부, 평덕시설의 하부에 그물망을 설치하여 포획된 성충 개체수를 계수하였다. 그 결과 그물망 처리구에서 20.4~34.7%, 그물망 + 정향유 혼합처리구에서 21.1~38.1% 수준으로 무처리구보다 낮은 성충수가 포획되었다. 또한 그물망 설치위치에 따른 포획 개체수는 수관하부 설치구 대비 과수원 외곽은 10.9~14.3배, 수관 상부는 5.1~9.1배로 더 많이 포획되었다. 처리구별 잎 피해율을 조사 한 결과 두 지역 모두 무처리구와 비교하여 유의적으로 그물망, 그물망 + 정향유 처리구에서 잎 피해율이 낮았다. 따라서 큰검정풍뎅이에 의한 잎 피해를 예방하기 위해 그물망을 외곽에 처리하는 것이 실용적 대안이라고 판단된다. The purpose of this study was to investigate whether leaf damage in pear orchards caused by large black chafer beetles can be controlled through net traps and clove oil treatment. In June 2017, we measured large black chafer beetle population density and leaf damage rates in two orchards, located in Boseong and Hampyeong, under three treatments: net, net plus clove oil, and control. In order to evaluate the effect of net position on the adult beetles, nets were placed outside the orchard and along the upper and lower parts of a horizontal trellis. The adult beetle population density was 20.4 to 34.7% lower in the net alone treatment, and 21.1 to 38.1% lower in the combined net and clove oil treatment than in the control. The adult beetle population density was 10.9-14.4 times higher outside the orchard and 5.1 to 9.1 times higher in the upper parts of the horizontal trellis than in the lower parts of the horizontal trellis. Leaf damage under both the net only and net plus clove oil treatments was significantly lower than that in the control at both sites. Therefore, intensive net installation around orchards may be a practical organic alternative to prevent leaf damage caused by large black chafer beetles.
서호진 ( Ho Jin Seo ),정상화 ( Sang Hwa Jeong ) 조선대학교 공학기술연구원 2008 공학기술논문지 Vol.1 No.2
Implant surgery is generally accepted as the good technique to replace the teeth completely. Development of CT(Computerized Tomography) and 3D visualization technique help to make the treatment plan and the surgical navigation assists the dentist during the intra-operative procedure. Although the navigation technique facilitates the positioning, the image guided adjustment of the angle cannot be attained easily in the dental surgery. In the paper, design and simulation of assist-manipulator fot implant surgery are studied. Angulation device performs a task by cooperative manipulation. The force/torque sensor is attached to the tool and specifically designed for surgeon`s input. Data acquisition board, LabVlEW software and ATI force/torque sensor are used for smooth and accurate sensing. The double parallelogram mechanism can provide a fixed entry point during the surgery, enhance the safety and quality, and give facilities for surgeons. The 3D visualization program of manipulator is developed by LabVIEW.
립이 있는 2차원 슬롯 형상의 가스터빈 입구측 케이싱 막냉각 장치 막냉각 특성에 대한 수치적 연구
서호진(Ho Jin Seo),민준기(June Kee Min),하만영(Man Yeong Ha) 대한기계학회 2020 大韓機械學會論文集B Vol.44 No.11
립이 있는 2차원 슬롯에 대해 분사비 0.2~1.5 범위에서 슬롯 형상의 변화가 막냉각 효율, 누셀트수에 미치는 영향을 수치 해석으로 연구하였다. 형상 변수로 립의 두께, 분사구-슬롯 면적비 및 분사 각도를 선정하였다. 립 두께의 증가는 낮은 분사비에서 막냉각 효율의 감소를 야기하는 반면, 높은 분사비에서 막냉각 효율을 증가시키는 요인임을 확인하였다. 립의 두께 및 분사구-슬롯 면적비의 증가에 따라 누셀트 수가 감소함을 확인하였다. The effects of a two-dimensional slot geometry with a lip on the film cooling effectiveness, i.e., the Nusselt number, were numerically investigated in the blowing ratio range of 0.2~1.5. For geometric parameters, the lip thickness, area ratio, and injection angle were considered. The film cooling effectiveness was found to decrease as the lip thickness increased for a low blowing ratio and increase for a high blowing ratio. As the area ratio and lip thickness increased, the Nusselt number decreased.