http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
α-TCP의 가수분해에 의한 수산화아파타이트 휘스커의 제조
백동주,양태영,이윤복,윤석영,박홍채 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.6
pH 9.1, 9$0^{\circ}C$, 6시간의 조건에서 $\alpha$-tricalcium phosphate ($\alpha$-Ca$_3$(PO$_4$)$_2$)의 가수분해반응에 의해서 잘 발달된 수산화아파타이트 휘스커상 (길이 5$mu extrm{m}$,지름 0.5$\mu\textrm{m}$)이 합성되었다 수산화아파타이트로 $\alpha$-Ca$_3$(PO$_4$)$_2$의 전환에 미치는 반응조건(온도, 시간, pH)의 영향이 조사되었다. 아울러 XRD, SEM, ICP, TGA와 같은 분석기기를 사용하여 수산화아파트의 미세구조, 조성, 열적 안정성을 검토하였다. Well developed hydroxyapatite whiskers (length 5 ${\mu}{\textrm}{m}$, diameter 0.5 ${\mu}{\textrm}{m}$) have been synthesized by the hydrolysis reaction of $\alpha$-tricalcium phosphate ($\alpha$-Ca$_3$(PO$_4$)$_2$) under pH 9.1 at 9$0^{\circ}C$ for 6 h. The effect of reaction conditions (temperature, time, pH) on the conversion of $\alpha$-tricalcium phosphate to hydroxyapatite was examined. In addition, the hydroryapatite was characterized in terms of microstructure, composition and thermal stability using XRD, SEM, ICP, and TGA instruments.
PET 필름을 활용한 난방기기의 발화가능성에 관한 연구
백동주,김길수,김정환,황정택 한국화재감식학회 2021 한국화재감식학회 학회지 Vol.12 No.3
This study is about the possibility of ignition and the cause of fire in a heating system using PolyEthylene Terephthalate (PET heating film). The fire case of PET heating film was investigated and the ignition point of each sample was analyzed through DSC-TGA. Based on this, the temperature measurement of heating element, the ignition test when the heating element disconected, and the connection part is damaged, the ignition test when the compression terminal is in incomplete contact, and the ignition possibility test of thermostat were conducted. As a result of the reenactment test, it is less possible to be on fire when the temperature sensor of the thermostat fails, but if the combustor and connection are damaged, if the compression terminal is in incomplete connection, it is possible to ignite due to the thermostat. From the research result, we are going to establish standards for fire investigation techniques and raise safety by raising awareness of the correct installation, importance of use, and the risk of fire in operation, finally it is contributing to the prevention of fire and helping to improve the quality of life of the people.
Nanoindentation을 이용한 산화물 층상 복합체의 기계적 성질 평가
윤석영,백동주,양태영,박홍채 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.7
Tape cast laminar composites with alumina/zircon(reaction-bonded mullite/zirconia) as an inner layer and alumina/zirconia or mullite/zirconia as an outer layer have been fabricated by hot-pressing. The mechanical properties(hardness and Young's modulus) and microstructure of laminar composites were examined using a nanoindentation technique and Scanning Electron Microscopy (SEM), respectively. The indentation load-displacement curve revealed the existence of residual stress in laminar composites. 테이프 캐스팅법을 이용하여 알루미나/지르콘(반응결합 뮬라이트/지르코니아 유도)을 내부층으로 하고 알루미나/지르코니아 혹은 뮬라이트/지르코니아를 외부층으로 하는 산화물 층상 복합체를 고온가압소결법으로 제조하였다. 나노압입시험법을 이용하여 층상 산화물 복합체의 기계적 성질(경도 및 탄성계수)을 측정하고, SEM을 통하여 복합체의 미세구조를 관찰하였다. 산화물 층상 복합체의 제조를 위한 가열·냉각시 유도된 구성 산화물간의 열팽창 계수의 차이로 인하여 생성된 잔류응력을 하중-변위곡선을 이용하여 확인할 수 있었다.