http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sn-3.0Ag-0.5Cu 솔더링에서 플럭스 잔사가 전기화학적 마이그레이션에 미치는 영향
방정환,이창우,Bang, Jung-Hwan,Lee, Chang-Woo 대한용접접합학회 2011 대한용접·접합학회지 Vol.29 No.5
Recently, there is a growing tendency that fine-pitch electronic devices are increased due to higher density and very large scale integration. Finer pitch printed circuit board(PCB) is to be decrease insulation resistance between circuit patterns and electrical components, which will induce to electrical short in electronic circuit by electrochemical migration when it exposes to long term in high temperature and high humidity. In this research, the effect of soldering flux acting as an electrical carrier between conductors on electrochemical migration was investigated. The PCB pad was coated with OSP finish. Sn3.0Ag0.5Cu solder paste was printed on the PCB circuit and then the coupon was treated by reflow process. Thereby, specimen for ion migration test was fabricated. Electrochemical migration test was conducted under the condition of DC 48 V, $85^{\circ}C$, and 85 % relative humidity. Their life time could be increased about 22% by means of removal of flux. The fundamentals and mechanism of electrochemical migration was discussed depending on the existence of flux residues after reflow process.
방정환,김한상,이동훈,민경덕 대한기계학회 2008 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.22 No.8
In this paper the modeling of a fuel cell powered electric vehicle is presented. The fuel cell system consisting of a proton exchange membrane (PEM) fuel cell stack and balance of plant (BOP) was co-simulated with a commercial vehicle simulation program. The simulation program calculates the load of the fuel cell depending on the driving mode of the vehicle and also calculates the overall efficiency and each parasitic loss by applying the load in the fuel cell model that is used to estimate the performance of the entire vehicle system by calculating the acceleration performances and fuel economy of the vehicle. Two types of air feeding systems (blower type and compressor type) were modeled by using MATLAB/Simulink environment and the effect of fuel cell stack size (number of cells, cell area) on the fuel economy and performance of the fuel cell powered vehicle was investigated. Using a driving cycle of FTP-75, the required power, BOP component power loss, and system efficiency for two types of fuel cell systems were analyzed. Through this study, we could get a basic insight into the fuel cell powered electric vehicle and its characteristics.