개인특성 및 시스템특성이 기술혁신제품의 수용에 미치는 영향 연구 - 클라우드 컴퓨팅을 대상으로 -

박철우,정해주,Park, Cheol-Woo,Jeong, Hae-Joo 한국벤처창업학회 2012 벤처창업연구 Vol.7 No.2

기술혁신제품에 대한 사업화의 성공 여부는 소비자가 제품을 선택하여 이용하는 정도에 달렸다. 따라서 기술혁신제품 사용자의 수용의도와 사용행위에 영향을 미치는 요인에 대한 연구는 매우 중요하다. 본 연구는 기술혁신제품인 클라우드 컴퓨팅을 대상으로 기술혁신제품의 사업화에 영향을 미치는 요인을 제시하고자 하였다. 기존 연구들은 TAM 모형을 확장하면서 태도와 사용행위를 제외하고 수용의도만 검증하였지만, 본 연구에서는 태도와 사용행위 그리고 소비자의 개인적 특성을 중요한 영향요인으로 포함하였다. 연구 결과 첫째, 개인특성의 자기효능감은 지각된 사용용이성과 수용의도에, 지각된 비용은 지각된 유용성과 지각된 사용용이성에 각각 정(+)의 영향 미치는 것으로 나타났다. 둘째, 클라우드 컴퓨팅의 시스템특성인 보안성은 수용의도에, 혁신성은 사용용이성에 정(+)의 영향을 미치는 변수로 확인되었다. 셋째, 사용자들의 활용특성인 지각된 유용성은 수용 및 사용행위에 정(+)의 영향을 미치며, 지각된 사용용이성은 지각된 유용성에 정(+)의 영향을 미치는 것으로 확인되었다. 본 연구는 클라우드 컴퓨팅에 의한 서비스가 대중적으로 확산되지 않은 현시점에서 수용 및 사용행위에의 영향변수를 제시함으로서 정책적 방향 및 사업화 전략에 의미 있는 결과를 제공하였다. The possibility of successful commercialization of technologically innovative products depends on the degree to which consumers select and utilize the product. Therefore, the research that endeavors to find the usage behavior and the acceptance intention of users of technologically innovative products is a very important quest. This study empirically analyzes the factors that influence commercialization of a technologically innovative product: cloud computing. Existing studies examined acceptance intentions by expanding the TAM model and excluded attitude and usage behavior. This study determined attitude, usage behavior and personal characteristics of consumers to be important influencing factors. The results of the empirical analysis are as follows: First, the self-efficacy of personal characteristics had a significant effect on ease of use and acceptance intention and perceived costs had a significant influence on the factors of perceived usefulness and perceived ease of use. Second, research on the systematic characteristics of cloud computing confirmed that security was an important factor affecting acceptance intention while innovativeness was critical to ease of use. Third, of the usage characteristics among users of technologically innovative products, perceived usefulness had an effect on the acceptance and usage behavior of cloud computing, and perceived ease of use had an important influence on perceived usefulness. Currently, when cloud computing services have not yet become widespread to the public, this study proposed meaningful results for policy direction and commercialization strategies by revealing variables that influence acceptance and usage behavior.

방사선치료 암 환자의 대체요법 경험실태 조사연구

박철우,박태진,Park Cheol Woo,Park Tae-Jin 대한방사선치료학회 2001 大韓放射線治療技術學會誌 Vol.13 No.1

Although it is presumed that cancer patients take various alternative therapies, the present status is not well recognized. The purpose of this study is to survey alternative therapies used by cancer patients receiving radiation therapy and then, find associated factors of taking alternative therapies. The study subjects were composed of those who receiving radiation therapy in the department of radiation oncology in 5 hospitals located at Extended Busan city and who were on follow-up after medical cure. They were 394 male and female patients over 20 years old. The mean age of the subjects was 53.2 years old and the age ranged from 23 to 83 years old. 188 patients($47.7\%$) used alternative therapies. Total 68 different kinds of alterative therapies were used, average 7.3 kinds per patient were experienced, and average total cost expenditure was 2,830,000 won. Among the alternative therapies, black bean($38.8\%$) was the most commonly used and brown rice($38.3\%$), ganoderm lucidum($37.8\%$), elm tree($33.5\%$), and phellinus linteus($30.8\%$) were followed in order of frequency. However in considering the time, cost and effort spent, phellinus linteus was the first. In terms of cost, phellinus linteus was the highest with average expenditure of 2,740,000 won. Among the motivation of using alternative therapies, expecting auxiliary help for the hospital therapy was the highest ($31.4\%$). About half of users($56.9\%$) of alternative therapies were recommended by their relatives to use alternative therapies. In comparing the characteristics of experienced and unexperienced groups, alternative therapy was experienced significantly more in patients of younger age(p=0.001), in patient of higher educational level(p=0.001), and in patients of higher income(p=0.030) The proportion of using alternative therapies was significantly higher in the group treated with chemotherapy(p=0.005), and in the patients who did not satisfy with radiation therapy(p=0.001). The frequency of drinking was significantly higher tendency in the inexperienced group(p=0.046), There was no significant difference in marital status, job, religion, other disease, surgical operation of the cancer and smoking staus between the two groups. Among the unexperienced group, $34.0\%$ of the patients did not take the alternative therapies because they did not have know]edge for the alternatives, and $22.3\%$ worried about negative effects on hospital-based therapy $58.7\%$ of them were willing to take the alternative therapies if the effects and safety were proven by the government or research institutes. $21.9\%$ of the patients wanted to take the alternatives if they were affordable. $72.3\%$ of the patients was willing to take them if their families recommend, but $27.2\%$ responded they would not take them in any situation. Conclusively, various kinds of alternative therapies which were not proved medically were exposed to patients, In these circumstances, it is required to investigate, study and evaluate the medical effects and safety of the alternative therapies.

다공성 방풍펜스 후방에 놓인 삼각프리즘의 표면압력특성에 관한 풍공학적 연구

박철우,이상준,Park, Cheol-U,Lee, Sang-Jun 대한기계학회 1997 大韓機械學會論文集B Vol.21 No.11

The effects of porous wind fence on the pressure characteristics around a 2-dimensional prism model of triangular cross-section were investigated experimentally. The fence and prism model were embedded in a neutral atmospheric surface boundary layer over the city suburb. In this study, various fences of different porosity, back fence, inclination angle of prism and location of additional back prisms were tested to investigate their effects on the pressure and wall shear stress of the prism surface. The fence and prism had the same height of 40 mm and Reynolds number based on the model height was Re=3.9*10$^{4}$. The porous fence with porosity 40% was found to be the best wind fence for decreasing the mean and pressure fluctuations on the prism surface. By installing the fence of porosity 40%, the wall shear stress on the windward surface of prism was largely decreased up to 1/3 of that without the fence. This indicates that the porous fence is most effective to abate the wind erosion. Pressure fluctuations on the model surface were decreased more than half when a back fence was located behind the prism in addition to the front fence. With locating several back prisms and decreasing the inclination angle of triangular prism, the pressure fluctuations on the model surface were increased on the contrary.

다공성 방풍펜스가 대기경계층내에 놓인 삼각프리즘 표면압력에 미치는 영향에 관한 연구

박철우,성승학,Park, Cheol-U,Seong, Seung-Hak 대한기계학회 1996 大韓機械學會論文集B Vol.20 No.8

Effeccs of porous wind fence on surface-pressure around 2-dimensional prism model of triangular cross-section were investigated experimentally. The pressure data were obtained at a Reynolds number based on the model height of Re=2.1*10$^{5}$ . Flow visualization also carried out to investigate the flow structure qualitatively. The mean velocity and turbulent intensity profiles measured at fence location were well fitted to the neutral atmospheric surface boundary layer over the open terrain. Various fences with different porosity and height were tested to investigate their effects on the surface pressure acting on a prism model at different locations. As the results, porous fence with porosity 40 ~ 50% is most effective for abating wind erosion. With decreasing porosity of the fence, pressure fluctuations on the model surface are increased. The mean pressure coefficients are decreased only when the fence height is greater than the model height. The effect of distance between wind fence and triangular prism was not significant, compared to that of the fence porosity and height.

대기경계층 내에 놓인 자유단 원주의 형상비가 후류유동에 미치는 영향에 관한 연구

박철우,이상준,Park, Cheol-U,Lee, Sang-Jun 대한기계학회 2001 大韓機械學會論文集B Vol.25 No.12

The flow around free end of a finite circular cylinder (FC) embedded in an atmospheric boundary layer has been investigated experimentally. The experiments were carried out in a closed-return type subsonic wind tunnel with varying aspect ratio of the finite cylinder mounted vertically on a flat plate. The wakes behind a 2-D cylinder and a finite cylinder located in a uniform flow were measured for comparison. Reynolds number based on the cylinder diameter was about Re=20,000. A hot-wire anemometer was employed to measure the wake velocity and the mean pressure distributions on the cylinder surface were also measured. The flow past the FC free end shows a complicated three-dimensional wake structure and flow phenomenon is quite different from that of 2-D cylinder. The three-dimensional flow structure was attributed to the downwashing counter rotating vortices separated from the FC free end. As the FC aspect ratio decreases, the vortex shedding frequency decreases and the vortex formation length increases compared to that of 2-D cylinder. Due to the descending counter-rotating twin-vortex, near the FC free end, regular vortex shedding from the cylinder is suppressed and the vortex formation region is hardly distinguished. Around the center of the wake, the mean velocity for the FC located in atmospheric boundary layer has large velocity deficit compared to that of uniform flow.

볼나사 그루브 상사비 결정에 관한 연구

박철우,김대은,이상조,Park, Cheol-U,Kim, Dae-Eun,Lee, Sang-Jo 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.1

Ball screws are commonly used in linear motion feeding systems of various machine tools and automated systems. They are known to have relatively little backlash, high precision and efficiency compared to ordinary lead screws. Furthermore, the effectiveness of ball screw has made it the preferred choice of many newly developed high speed precision feeding units. The motivation of this work is to establish the groove edsigh basis of ball screws for the reduction of contact fatigue failure. In most instances, fatigue failure between ball and shaft groove is due to excessive contact pressure. Especially, the excessive load is causative of plastic flow below the contact surface, which can contribute to surface failure. But, in spite of small load, if groove conformity rate is large, contact pressure is increased and internal shear stress reach the yield value of the material. In such a point, the authors deal with design procedure for deciding the permissible conformity rate of a ball screw groove with the computational evaluation of contact pressure and maximum shear stress.

하악 제1대구치 단일 수복을 위한 발치 즉시 임플란트의 임상증례

박철우,Park, Cheol-Woo 대한심미치과학회 2021 Journal of the Korean Academy of Esthetic Dentistr Vol.30 No.1

Immediate implantation is widely applied as it is recognized as a useful implant treatment in dental clinic due to its various advantages as well as being able to shorten the treatment period. Immediate implant treatment was performed on 5 patients who needed extraction of the mandibular first molar for various reasons, shortening the overall treatment period, and obtaining satisfactory results. Immediate implantation after extraction is a high-level treatment that requires proper initial fixation at the exact location of the extraction socket and the surrounding soft tissues, but is considered to be a clinically very useful prosthetic restoration method 발치 즉시 임플란트는 치료 기간을 단축할 수 있을 뿐만 아니라 여러 가지 장점으로 인해서 치과임상에서 유용한 임플란트 치료법으로 인식되면서 널리 적용되고 있다. 다양한 이유로 인해서 하악 제1대구치의 발치가 필요한 5명의 환자에게 발치 즉시 임플란트 치료를 진행하여 전체 치료 기간을 단축하면서 만족스러운 결과를 얻었다. 발치 즉시 임플란트는 발치와 내 정확한 위치에 적절한 초기고정을 얻어야 하고 주위 연조직도 개선해야 하는 고난도 치료법이지만 임상적으로 매우 유용한 보철 수복 방법이라고 판단된다.

EDISON Co-rotational Plane Beam-Dynamic Tip Load를 이용한 가진주파수 변화에 따른 외팔보의 자유단 진동 연구

박철우,주현식,류한열,신상준,Park, Chul-Woo,Joo, Hyun-Shig,Ryu, Han-Yeol,Shin, Sang-Joon 한국전산구조공학회 2015 한국전산구조공학회논문집 Vol.28 No.5

본 논문에서는 Euler-Bernoulli Beam(EB-beam) 및 신속 Fourier 변환을 이용하여 수치분석적 빔 모델 및 Co-rotational plane beam EDISON program(CR-beam)을 이용한 빔 모델의 가진주파수 변화에 따른 외팔보의 자유단 진동 연구를 수행하였다. 위의 두 빔 모델에서의 끝단에서는 진동이 시간이 지남에 따라 감소하다가 정상상태에 이르는 것을 확인하였다. 끝단에서 가진주파수가 증가함에 따라 구조적 감쇠에 의해 변위이 감소하는 경향을 보인다. 감쇠를 고려한 EB-beam과 CR-beam가 정상상태로 진입하는 경향이 비슷하나, 가진주파수는 정상상태가 나타나는 시간과 독립적임을 제시한다. In this paper, Euler-Bernoulli beam theories(EB-beam) are used, and Fast Fourier Transformation(FFT) analysis is then employed to extract their natural frequencies using both analytical approach and Co-rotational plane beam(CR-beam) EDISON program. EB-beam is used to analyze a spring-mass system with a single degree of freedom. Sinusoidal force with various frequencies and constant magnitude are applied to tip of each beam. After the oscillatory tip response is observed in EB-beam, it decreases and finally converges to the so-called 'steady-state.' The decreasing rate of the tip deflection with respect to time is reduced when the forcing frequency is increased. Although the tip deflection is found to be independent of the excitation frequency, it turns out that time to reach the steady state response is dependent on the forcing frequency.

루프형 낙석방지안전시설의 구조적 안전성 검토 연구

박철우,이학용,Park, Cheol-U,Lee, Hak-Yong 한국건설안전협회 2009 建設 安全技術 Vol.50 No.-

Road is typically constructed along ridge area of mountain because of topographical and economic reasons. Therefore, road may face lots of open cut slope which can easily cause rock falling. This study evaluates the structural safety of newly developed falling rock protection system which has a roof deck plate. The structural performance under self-weight, snow load and load from failing rock was investigated using a finite element numerical analysis method. From the analysis results, the H-beam space was limited not to exceed 2.2m. The deck plate was also safe under the examined loading condition. A hinge and connection in the system were investigated through detailed modelling and analysis. The results showed that the hinge was safe enough and that the connection should strengthened with appropriate stiffeners.

대기경계층 내에 놓인 실린더의 자유단 형상변화가 후류유동에 미치는 영향에 관한 연구

박철우,이상준,Park, Cheol-Woo,Lee, Sang-Joon 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.1

The flow structure around the free end of a finite circular cylinder (FC) embedded in an atmospheric boundary layer (ABL) over open terrain was investigated experimentally with varying the free end shape. The experiments were carried out in a closed-return type subsonic wind tunnel. A finite cylinder with an aspect ratio (L/D) of 6 was mounted vertically on a long flat plate. The Reynolds number based on the cylinder diameter is about Re=7,500. The velocity fields near the FC free end were measured using the single-frame double-exposure PIV method. As a result, for the FC with a right-angled free end, there is a peculiar vortical structure, showing counter-rotating twin vortices near the FC free end. It is caused by the interaction between the entrained irrotational fluids from both sides of FC and the downwash flow from the FC free-end.