http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선모(仙茅) 열수(熱水) 추출물의 Collagen 유발 관절염에 대한 약리 효능 연구
서부일 ( Bu Il Seo ),노성수 ( Seong Soo Roh ),박지하 ( Ji Ha Park ),박찬익 ( Chan Ik Park ),구진숙 ( Jin Suk Koo ) 대한본초학회 2016 大韓本草學會誌 Vol.31 No.4
Objectives:In Korean medicine, Curculiginis Rhizoma was treated for arthritis in remedy. But efficacy of Curculiginis Rhizoma on collagen induced arthritis was not revealed. Methods:Anti inflammatory effect of Curculiginis Rhizoma was researched in vitro with RAW264.7 cell and cell toxicity, levels of proinflammatory cytokines (TNF-α, IL-1β, IL-6 and IL-12) and PGE2 were analyzed by ELISA assay. Inflammatory protein were analyzed by western blotting assay (JNK, ERK, COX-2, TNF-α and IL-1β). In vivo, collagen induced arthritis mice model was used to evaluate anti-inflammation effect through arthritis index, immune cell number and cytokine levels (TNF-α, IL-6 and IL-1β) in serum. Results:ECR(Extract of Curculiginis Rhizoma) has not shown cell toxicity in 200 ㎍/㎖ on RAW264.7 cell. ECR suppressed releases of NO, TNF-α, IL-1β, IL-6, IL-12 and PGE2 on RAW264.7 cell treated with lipopolysacharide (1 ㎍/㎖). And ECR inhibited regulation of TNF-α, IL-1β and IL-6 mRNA, reduced protein release of JNK, ERK, iNOS, COX-2, IL-1β and TNF-α. AI of group treated with ECR 200 ㎎/㎏ and 100 ㎎/㎏ were significantly decreased compared to vihicle arthritis mice, the number of immune cell in foot joint was increased on control mice but those of group treated with ECR 200 ㎎/㎏ and 100 ㎎/㎏ were significantly reduced. This results correspond with contens of cytokines (TNF-α, IL-1β and IL-6) in serum. Conclusions:Curculiginis Rhizoma has anti-inflammation effect on RAW264.7 cell in vitro and collagen induced arthritis in vivo . So it is necessary to research more mechanism for cascade imfact.
폴리우레탄 방수재의 숯 첨가량에 따른 인장성능 변화추이 연구
박진상 ( Park Jin-sang ),김동범 ( Kim Dong-bum ),박완구 ( Park Wan-goo ),하미영 ( Ha Mi-young ),김병일 ( Kim Byoung-il ),오상근 ( Oh Sang-keun ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.2
Polyurethane coating materials are widely used in waterproofing construction because they ensure easy workability and high performance mechanical properties, and such polyurethane coating materials are in various mixture ratios. This study carried out a test to determine the basic physical property changes of polyurethane coating material based on the amount of charcoal additives to. The results showed that he tensile strength was found to be 3.1 N / ㎟ when the charcoal amount was at 2%, displaying the highest performance rate.
Flexible Incremental 알고리즘을 이용한 신경망의 단계적 구축 방법
박진일(Jin-Il Park),정지석(Ji-Suk Jung),조영임(Young-Im Cho),전명근(Myung-Geun Chun) 한국지능시스템학회 2009 한국지능시스템학회논문지 Vol.19 No.4
복잡한 비선형 회귀문제들에서 최적의 신경망을 구축하기 위해서는 구조의 선정 및 노이즈에 의한 과잉학습(overtraining) 등에 따른 많은 문제들이 있다. 본 논문에서는 flexible incremental 알고리즘을 이용하여 단계적으로 최적의 신경망을 구축하는 방법을 제안한다. Flexible incremental 알고리즘은 예측 잔류오차를 최소화하기 위해 단계적으로 추가되어지는 은닉노드 개수를 검증데이터를 이용하여 신축성 있게 조절하고, 빠른 학습을 위하여 ELM (Extreme Learning Machine)을 이용한다. 제안된 방법은 신경망의 구축과정에서 사용자의 어떠한 관여 없이도 빠른 학습과 적은 수의 은닉노드들에 의한 범용 근사화 (universal approximation)가 가능한 신경망의 구축이 가능한 장점을 가지고 있다. 다양한 종류의 벤치마크 데이터들을 이용한 실험 결과를 통하여 제안된 방법이 실제 회귀문제들에서 우수한 성능을 가짐을 확인하였다. There have been much difficulties to construct an optimized neural network in complex nonlinear regression problems such as selecting the networks structure and avoiding overtraining problem generated by noise. In this paper, we propose a stepwise constructive method for neural networks using a flexible incremental algorithm. When the hidden nodes are added, the flexible incremental algorithm adaptively controls the number of hidden nodes by a validation dataset for minimizing the prediction residual error. Here, the ELM (Extreme Learning Machine) was used for fast training. The proposed neural network can be an universal approximator without user intervene in the training process, but also it has faster training and smaller number of hidden nodes. From the experimental results with various benchmark data sets, the proposed method shows better performance for real-world regression problems than previous methods.
저온 환경에서의 열풍융착 속도별 화학적 침식이 EVA 방수시트의 접합부 인장강도에 미치는 영향에 대한 연구
박진상(Jin-Sang Park),최수영(Su-Young Choi),박완구(Wan-Goo Park),정해춘(Hae-Choon Jung),김병일(Byoung-Il Kim),오상근(Sang-Keun Oh) 한국건설순환자원학회 2017 한국건설순환자원학회 논문집 Vol.5 No.3
본 연구는 EVA시트의 접합부 시공에 열풍융착 방법을 적용하여 저온 환경에서의 열풍융착 속도의 변화와 화학적 침식에 따른 접합부 인장 강도의 성능 변화 분석을 목적으로 진행하였다. 연구는 시트 간 접합 방식을 간접가열 방식인 열풍융착을 적용하여 열풍융착 속도를 조절하고 화학처리 과정을 가지는 조건에서 진행하였으며, 시공 기온은 –10℃, -5℃, 0℃, 20℃로 온도 조건을 한정하여 연구를 진행하였다. 접합부의 인장성능 시험결과, 저온 환경에서 열풍융착 속도가 3~4m/min일 때 접합부 인장강도가 높게, 20℃에서는 열풍융착 속도가 5~6m/min일 때 접합부 인장강도가 높게 나타나는 것으로 확인되었다. This study is based on the hot air welding application method of EVA sheet to test the tensile strength performance changes due to the hot air welding speed, temperature and chemical attack. For the parameters of the study, the hot air welding method that directly heats the overlap between the sheets and the adhesion surface was controlled, and the maximum temperature for application was set to 20°C, 0°C, -5°C, -10°C. According to the results of the testing, the tensile strength of the overlap area was the highest between the temperatures of 20 at 5~6m/min and between the low temperatures at 3~4m/min of hot air welding speed.
유연성 천공기를 이용한 Bankart 병변의 골관통식 봉합
박진수(Jin-su Park),원예연(Ye-Yeon Won),유정한(Jung-Han Yoo),박용욱(Yong-Wook Park),노규철(Kyu-Chul Noh),정국진(Kuk-Jin Chung),김홍균(Hong-Kyun Kim),황지효(Ji-Hyo Hwang),이용범(Young-Bum Lee),서일우(Il-Woo Suh) 대한견주관절의학회 2010 대한견주관절의학회지 Vol.13 No.1
목적: 견관절의 Bankart 병변에 대하여서 관절경적 수술하에서도 골경유 봉합이 가능하도록 유연성 골 천공기를 개발하였으며 이에 대한 동물 실험 및 임상 증례를 보고하는 바이다. 대상 및 방법: 유연성 천공기 세트는 유연성 천공기와 유도관으로 구성되어 있다. 유연성 천공기는 49개의 미세강선들이 단일 강선 (직경 1.2 mm)으로 꼬인 구조로 이루어져 유연성이 있으며 이러한 유연한 강선의 한 쪽 끝에는 천공기 (직경 1.2 mm)가 용접되어 있는 구조로 이루어져 있다. 유도관은 외경 3.0 mm, 내경 2.0 mm의 원통형 금속 도관으로 이루어져 있으며 한 쪽 끝은 30도 정도 굴곡되어 있다. 기기의 내구성 및 임상적 유용성을 시험하기 위하여 돼지의 견갑골 관절와에 골 천공을 실시하는 실험을 30회 이상 실시하였다. 유연성 강선 부위의 기계적 파단이나 골 천공의 실패 등은 발생하지 않았다. 일반적 견관절 관절경 술식대로 견관절의 후방 입구 및 전 상방, 전 후방 입구들을 확보한 후 관절경하에서 Bankart 병변이 확인이 되면 면도기를 이용하여 견갑와 내측면의 변연 절제를 실시하여 골 출혈을 유도한다. 이후 관절경을 전 상방 입구로 이전 시키고, 후방 입구를 통하여서 유연성 골천공기 세트의 유도 강관을 삽입하는데 유도강관의 끝이 견갑와연에서 약 5 mm 정도 안쪽에 위치되도록 한다. 유도강관 내로 유연성 천공기를 삽입한 후 구동기를 이용하여서 견갑와의 골 천공을 실시한다. 골 천공 후에는 유연성 천공기만 유도강관에서 제거한 후에 유도 강관내로 봉합사를 삽입하여 천공된 골구로 통과시키도록 한다. 봉합 갈고리를 이용하여 관절와순에 유도봉합사를 통과시킨 후에 이 유도봉합사에 골 천공구를 통과한 봉합사를 끼워서 관절완순을 통과하도록 한 후 활주 결찰을 실시하여 골 관통 봉합을 이루도록 한다. 동일한 방식으로 견갑와의 2시, 4시 방향에 골 천공을 시행하여 견갑와순의 봉합을 실시한다. 결과: 외상성 견관절 탈구 환자 5예에서 유연성 골 천공기를 이용한 Bankart 병변의 봉합을 실시하였다. 수술 도중 또는 수술후의 신경이나 혈관 손상 등의 문제점이나 합병증 등은 발생하지 않았으며 기기 자체의 문제들도 발생하지 않았다. 평균 6개월간의 추시 결과 상에서는 재탈구 등의 증상은 나타나지 않았다. 결론: 유연성 골 천공기를 사용한 Bankart 병변의 봉합시 관절경적 수술이면서도 골 관통식 봉합이 가능하여 관절와순의 부착면적의 증대 효과 뿐 아니라 손쉬운 활주 결찰이 이루어 질 수 있음을 보여주었다. Purpose: Too develop a flexible drill device that can be inserted into the shoulder joint so that arthroscopic transosseous suture repair for Bankart lesion is possible. Materials and Methods: We created a device composed of a flexible drill unit and a guide pipe unit. The flexible drill unit was made of flexible multifilament wires (1.2 mm in diameter) that was twisted into one cord so that it can flex in any direction and a drill bit (1.2 mm in diameter) that is attached onto one end of the flexible wire. The guide pipe unit was a 150 mm long metal pipe (2.0 mm in inner diameter and 3.0 mm in outer diameter), with one end bent to 30 degrees. The flexible drill set was inserted into the shoulder joint through the posterior portal of the joint. The guide pipe component was placed onto the medial wall of the glenoid so that the pipe was placed 5 mm posterior to the margin of the anterior glenoid rim. The flexible drill was driven through the glenoid by the power drill so that holes were made in the glenoid. A non- absorbable suture was passed through the hole. Tying of a sliding knot tying was accomplished over the capsule and labrum after making a stitch through the capsule and labrum with a suture hook loaded with suture passer. The same procedures were done at the 2 and 4 O’Clock positions of the glenoid. Results: Five cases with Bankart lesion received arthroscopic transosseous repair with our flexible drill device. There were no intraoperative problems. Neither redislocation nor subluxation was reported at final follow-up. Conclusion: Arthroscopic transosseous suture repair without suture anchors and easy tying of a sliding knot are possible with a flexible drill set.
폴리우레아 방수재의 탄소섬유함량에 따른 내열성능 변화추이 연구
박완구 ( Park Wan-goo ),박진상 ( Park Jin-sang ),최수영 ( Choi Su-young ),김동범 ( Kim Dong-bum ),김병일 ( Kim Byoung-il ),오상근 ( Oh Sang-keun ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.2
This study investigates the effect of improving the heat resistance performance when carbon fiber is mixed in the polyurea coating material. A tensile strength test method was carried out with the carbon fiber mixed polyurea specimens at an interval of 7, 14, and 21 days after heat treatment at 140±2℃. The test results showed that there was a significant decrease in the tensile strength performance. While the elongation and tensile performance decreased greatly, it was confirmed nevertheless the overall performance was maintained. This study proposes that mixing carbon fiber to the polyurea resin can effectively secure long-term heat resistance, thereby solving the problem of deterioration of physical properties caused by exposure to ultraviolet rays.