CMIP5 GCMs과 추정 방법에 따른 우리나라 기준증발산량 평가

박지훈,조재필,이은정,정임국,Park, Jihoon,Cho, Jaepil,Lee, Eun-Jeong,Jung, Imgook 한국농촌계획학회 2017 농촌계획 Vol.23 No.4

The main objective of this study was to assess reference evapotranspiration based on multiple GCMs (General Circulation Models) and estimation methods. In this study, 10 GCMs based on the RCP (Representative Concentration Pathway) 4.5 scenario were used to estimate reference evapotranspiration. 54 ASOS (Automated Synoptic Observing System) data were constructed by statistical downscaling techniques. The meteorological variables of precipitation, maximum temperature and minimum temperature, relative humidity, wind speed, and solar radiation were produced using GCMs. For the past and future periods, we estimated reference evapotranspiration by GCMs and analyzed the statistical characteristics and analyzed its uncertainty. Five methods (BC: Blaney-Criddle, HS: Hargreaves-Samani, MK: Makkink, MS: Matt-Shuttleworth, and PM: Penman-Monteith) were selected to analyze the uncertainty by reference evapotranspiration estimation methods. We compared the uncertainty of reference evapotranspiration method by the variable expansion and analyzed which variables greatly influence reference evapotranspiration estimation. The posterior probabilities of five methods were estimated as BC: 0.1792, HS: 0.1775, MK: 0.2361, MS: 0.2054, and PM: 0.2018. The posterior probability indicated how well reference evapotranspiration estimated with 10 GCMs for five methods reflected the estimated reference evapotranspiration using the observed data. Through this study, we analyzed the overall characteristics of reference evapotranspiration according to GCMs and reference evapotranspiration estimation methods The results of this study might be used as a basic data for preparing the standard method of reference evapotranspiration to derive the water management method under climate change.

능동형 제진장치의 등가모델을 이용한 구조해석

박지훈,윤수용,Park, Ji-Hun,Yun, Soo-Yong 한국전산구조공학회 2012 한국전산구조공학회논문집 Vol.25 No.4

본 논문에서는 구조물과 능동형 제진장치를 상용 구조해석 프로그램상에서 해석하는데 필요한 등가모델을 제시하였으며, 이를 통해 부재수준의 구조검토가 가능하도록 하기 위한 연구를 진행하였다. 능동형 제진장치를 일반적인 구조해석모델에 반영하기 위하여 가상의 스프링과 대쉬폿을 이용한 등가링크 모델과, 별도의 축소모델 해석결과를 바탕으로 산정된 제어력을 제진장치 설치위치에 하중으로 작용시키는 등가하중 모델을 제시하였다. 수직캔틸레버 모델과 주상복합 건물 모델을 대상으로 능동형 제어기 설계를 위해 모드에 기초한 축소모델을 구축하고, 이를 토대로 산정된 제어이득으로부터 등가모델을 도출하였다. 이들 모델에 대해 얻어진 가속도 및 변위의 RMS 응답과 최대 부재력을 토대로 등가해석모델의 유효성을 검증하였다. 결과적으로 능동형 제진장치의 상용 구조해석 프로그램을 통해 제어대상 구조물의 부재력 수준까지 상세한 구조검토가 가능함을 확인하였으며, 상대적으로 등가링크 모델이 더 우수한 정확도를 나타내었다. In this paper, equivalent models for active control devices are proposed so that building structures with such devices are analyzed using commercial structural analysis programs for the assessment of the structural members under active vibration control. Equivalent link models represent active control device with a virtual linear spring and dashpot, and equivalent force models are control force history acting at the installation point in structural models. Active controllers are designed based on the reduced-order models for a vertical cantilever model and a high-rise building model and corresponding equivalent models are determined from control gain matrices. Based on acceleration, displacement and member force responses, the effectiveness of the equivalent models is verified. As a result, proposed equivalent models, of which equivalent link model showed better performance, appear to enable detailed investigation of structural behavior to the extent of member force level.

계사 및 우사 내 암모니아 및 황화수소 노출농도 평가

박지훈,석지원,이상아,권오훈,이경숙,허용,윤충식,Park, Jihoon,Seok, Jiwon,Lee, Sangah,Kwon, Ohhun,Lee, Kyungsuk,Heo, Yong,Yoon, Chungsik 한국환경보건학회 2015 한국환경보건학회지 Vol.41 No.5

Objectives: There are many hazardous agents at livestock farms. In particular, gases can be detrimental to both workers and animals. This study evaluated ammonia and hydrogen sulfide concentrations in broiler hen barns and beef cattle barns according to sampling location and height. Methods: Three broiler hen barns and three beef cattle barns were selected for gas monitoring in this study. Ammonia and hydrogen sulfide concentrations were measured using a direct-reading instrument which could measure the target gases simultaneously. Gas monitoring was conducted at human breathing height and animal breathing height at three points in each livestock farm. Results: Ammonia concentrations at the broiler hen barns ranged from 3.3 to 12.5 ppm by sampling location and height, but hydrogen sulfide was not detected. In the beef cattle barns, ammonia ranged from 3.1 to 16.3 ppm and low concentrations of hydrogen sulfide were detected at some animal breathing heights. The gas concentrations detected at each livestock farm were significantly higher in the animal breathing zones than in human breathing zones (p<0.0001). Conclusions: We found a difference in gas concentrations between human breathing zones and animal breathing zones. Gas monitoring should be conducted to improve the related environment considering both workers' and animals' health and safety.

필터뱅크 기반 프로스트 알고리즘을 이용한 빔포밍 최적화

박지훈,이성주,홍정표,정상배,한민수,Park, Ji-Hoon,Lee, Sung-Joo,Hong, Jeong-Pyo,Jeong, Sang-Bae,Hahn, Min-Soo 대한음성학회 2008 말소리 Vol.66 No.-

Beamforming is one of the spatial filtering techniques which extract only desired signals from noisy environments using microphone arrays. Fixed beamforming is a simple concept and easy to implement. However, it does not show good performance in real noisy conditions. As an adaptive beamforming, Frost algorithm can be a good candidate. It uses the concept of the linearly constrained minimum variance (LCMV) algorithm. The difference between the Frost and the LCMV algorithm is the error correction scheme which is very effective feature in the aspect of performance. In this paper, as quadrature mirror filtering (QMF)-based filterbank is utilized as the pre-processing of the Frost beamformning, the filter length and the learning rate of each band is optimized to improve the performance. The performance is measured by the signal-to-noise ratio (SNR) and the Bark's scale spectral distortion (BSD).

KBC 2016에 따른 감쇠시스템 적용 구조물의 내진설계

박지훈,전성하,Park, Ji-Hun,Jeon, Seong-Ha 한국전산구조공학회 2017 전산구조공학 Vol.30 No.1

완전탄소성 감쇠기가 설치된 철근콘크리트 건물의 지진응답

박지훈,김훈희,Park, Ji-Hun,Kim, Hun-Hee 대한건축학회 2011 대한건축학회논문집 Vol.27 No.8

Empirical equation for estimating seismic response of the stiffness-degrading inelastic SDOF structures with fully elasto-plastic dampers are applied to 6- and 3-story reinforced concrete building structures with or without bearing walls. Fully elasto-plastic dampers are designed based on the nonlinear pushover analysis result for the bare frames. Nonlinear time history analysis is performed for the building models with dampers, and their ductility demands and spectral accelerations are transformed to those of SDOF structures, and compared with the response estimated using empirical equations for inelastic SDOF structures. Empirical equations estimates the ductility demands with reasonable accuracy, but the spectral accelerations have errors unacceptable for design purposes due to higher mode effects, which requires further improvement.

해외사례를 통해 살펴본 서울시 주차상한제 개선방향

박지훈,이태헌,이신해,Park, Ji-Hun,Lee, Tae-Heon,Lee, Sin-Hae 대한교통학회 2016 교통 기술과 정책 Vol.13 No.2

태양전지를 활용한 노후 건축물 그린 리모델링 디자인 사례분석 연구

박지훈,남원석,장중식,Park, Ji-Hoon,Nam, Won-Suk,Jang, Jung-Sik 한국융합학회 2020 한국융합학회논문지 Vol.11 No.9

본 연구는 파리기후변화협약 이후 전 세계적으로 각광받고 있는 태양전지를 활용한 노후 건축물 그린 리모델링 디자인의 국내외 사례 분석을 바탕으로 향후 진행할 태양전지를 활용한 그린 리모델링 디자인 제안의 긍정적인 측면과 시사점을 확인하고자 하였다. 연구의 방법으로는 문헌연구를 바탕으로 이론적 고찰을 진행하였고, 이후 국내외 태양전지를 활용한 그린 리모델링 디자인의 사례를 조사·분석하였다. 그 결과 플렉서블한 특징을 통한 시공의 용이성, 박막전지의 투명도와 색상의 조절을 통한 심미적 효과, 자유로운 사이즈 제작으로 재료 낭비가 적은 경제적 효과, 외관의 직접 부착을 통한 건물과의 조화로운 측면을 확인할 수 있었다. 이러한 점을 토대로 박막 태양전지를 그린 리모델링 디자인에 활용하여 올 수 있는 기대효과와 유효성을 제시하고, 향후 진행할 태양전지를 활용한 노후 건축물 그린 리모델링 디자인 제안에 대한 방향성과 참고 자료로 활용되기를 기대한다. Based on the analysis of domestic and international cases of green remodeling design for old buildings using solar cells, which have been in the spotlight around the world since the Paris Agreement on Climate Change, this study wanted to confirm the positive aspects and implications of the future green remodeling design proposal using solar cells. As a method of research, theoretical consideration was conducted based on literature research, and cases of green remodeling design using solar cells at home and abroad were investigated and analyzed. As a result, the ease of construction through flexible features, aesthetic effect through transparency and color adjustment of thin film cells, economic effect of less waste of materials through free size production, and harmonious aspect with the building through direct attachment of exterior were identified. Based on this, it is expected to present the expected effects of using thin-film solar cells for green remodeling designs, and to be used as a reference for the future design proposal for green remodeling of old buildings using solar cells.

지형학적 관점에서 본 고대인의 생활터전 유형 및 시굴 추천지점 -충남 아산 '온주지구 도시개발 사업부지'를 사례로-

박지훈,Park, Ji-Hoon 한국제4기학회 2011 제사기학회지 Vol.25 No.2

본 연구목적은 지형학적 관점에서 유구가 매몰되어 있을 가능성이 높은 구릉의 특정한 구역을 추정하여 이를 바탕으로 시굴 추천구역을 제시하고자 하는 것이다. 즉, 필자는 충남 아산 '온주지구 도시개발 사업부지'(이하 조사지역)를 대상으로 당시 거주했던 고대인의 생활터전 유형을 파악하고 그리고 조사지역에 분포하는 구릉의 미지형 특성을 고려하여 유구가 매몰되어 있을 가능성이 높은 구역을 추천하고자 한다. 분석결과는 다음과 같다. (1) 조사지역 일대에서 거주했을 고대인의 생활터전 유형은 크게 Type-I의 '저구릉+저습지' 그리고 Type-II의 '대소(大小)의 선상지(또는 하안단구)+저습지' 인 것으로 밝혀졌다. (2) 조사지역에서 유구 분포 가능성이 높은 구역 즉, 시굴 추천구역은 '구릉의 미지형 단위'를 기준으로 살펴보면, 정부사면과 정부평탄면이다. 정부사면과 정부평탄면이 조사지역에서 차지하는 개별 면적 비율은 각각 12.9%와 10.2%로서 면적 순위로는 각각 3위와 6위에 해당된다. 그리고 조사지역의 곡저평야(또는 곡저면)에서 시굴 추천구역은 소규모 선상지의 선단 혹은 매몰선단 부근이다. The purpose of this study is to assume the particular area of hills where it is highly possible for historical site to be buried in the viewpoint of geomorphology and based on this to suggest excavation-recommended area. Namely, this writer is to understand the dwelling site type of ancient people who had resided there at that time for the object of 'Ohnju region urban development business site' (referred as investigation area hereinafter) and considering the characteristics of micro-landform of hills which are distributed in investigation area and is to recommend the area where it is highly possible for historical site to be buried. The result of analysis is like the following. (1) Dwelling site types of ancient people who might have resided in the whole area of investigation region are discovered to be largely 'low hills+wetland' of Type-I and 'alluvial fan(or river terrace+wetland' of Type-II. (2) In investigation area if the area which has high possibility of distribution of historical site namely, excavation-recommended area is looked as based on micro-landform unit of hills, they are Crest slope and Crest flat. Individual area ratios which Crest slope and Crest flat occupies in investigation area are 12.9% and 10.2% respectively and the rankings are 3 and 6 each. And excavation-recommended areas in valley plain(or bottomland) of investigation area are in the vicinity of 'distal end' or 'buried distal end'of small scale alluvial fan.

저온 증착된 불소도핑 주석 산화 박막의 광학적·전기적 특성

박지훈,전법주,Park, Ji Hun,Jeon, Bup Ju 한국재료학회 2013 한국재료학회지 Vol.23 No.9

The electrical and optical properties of fluorine-doped tin oxide films grown on polyethylene terephthalate film with a hardness of 3 using electron cyclotron resonance plasma with linear microwave of 2.45 GHz of high ionization energy were investigated. Fluorine-doped tin oxide films with a magnetic field of 875 Gauss and the highest resistance uniformity were obtained. In particular, the magnetic field could be controlled by varying the distribution in electron cyclotron deposition positions. The films were deposited at various gas flow rates of hydrogen and carrier gas of an organometallic source. The surface morphology, electrical resistivity, transmittance, and color in the visible range of the deposited film were examined using SEM, a four-point probe instrument, and a spectrophotometer. The electromagnetic field for electron cyclotron resonance condition was uniformly formed in at a position 16 cm from the center along the Z-axis. The plasma spatial distribution of magnetic current on the roll substrate surface in the film was considerably affected by the electron cyclotron systems. The relative resistance uniformity of electrical properties was obtained in film prepared with a magnetic field in the current range of 180~200A. SEM images showing the surface morphologies of a film deposited on PET with a width of 50 cm revealed that the grains were uniformly distributed with sizes in the range of 2~7 nm. In our experimental range, the electrical resistivity of film was able to observe from $1.0{\times}10^{-2}$ to $1.0{\times}10^{-1}{\Omega}cm$ where optical transmittance at 550 nm was 87~89 %. These properties were depended on the flow rate of the gas, hydrogen and carrier gas of the organometallic source, respectively.