http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
내사고성이 우수한 냉간 압연용 단강 Roll 재질 개발
박세용(S. Y. Park),이정훈(J. H. Lee),원종철(J. C. Weon),이우동(W. D. Lee),윤종호(J. H. Yoon),박영철(Y. C. Park) 한국소성가공학회 2009 압연 심포지엄 Vol.2009 No.4
The process of cold rolling is becoming more severe with the increase in the production of high tensile steel strip as a result of increased demand. Consequently, there is a need to develop work roll materials with better resistance to wear and roll failure. DOOSAN has developed an improved in-house 5%Cr alloy, New HSR1, with properties superior to the existing inhouse 5%Cr alloy, Old HSR1. Test alloys were designed with controlled amounts of Si and Mn based on Old HSR1 and an optimum alloy was chosen based on thermal shock tests. A Prototype work roll was manufactured with New HSR1, and properties of test specimens were evaluated. The results indicated that New HSR1 has better properties than Old HSR1. After application of New HSR1 work rolls, productivity increased due to advanced resistance to wear and roll failure.
하수슬러지 및 음식물류폐기물의 열화학적 가수분해에 따른 특성 변화 및 혐기성 소화 효율 평가
박세용 ( Seyong Park ),송은혜 ( Eunhey Song ),한성국 ( Seongkuk Han ),이은실 ( Eunsil Lee ) 한국폐기물자원순환학회(구 한국폐기물학회) 2021 한국폐기물자원순환학회 춘계학술발표논문집 Vol.2021 No.-
본 연구에서는 음식물류 폐기물과 하수슬러지의 효과적인 병합 혐기성 처리를 위한 열화학적 가수분해 방법의 최적 조건 평가와, 열화학적 가수분해에 따른 병합 혐기성 소화 효율에 대해 평가하였다. 열화학적 가수분해는 온도(80, 100, 120, 140, 160, 180℃)와 NaOH (5, 20, 40, 60, 100 meq/L) 조건에 따른 solubilization COD, CST (Capillary Suction Time), TTF (Time to Filter), volatile fatty acids (VFAs) 등에 대해 평가를 하였으며, 병합 혐기성 소화 효율 평가는 biochemical methane potential (BMP) test를 통해 평가하였다. 실험결과 음식물류폐기물과 하수슬러지의 열화학적 가수분해 시 온도 140℃, NaOH 60 meq/L에서 solubilization COD 20% 이상, CST와 TTF가 60초 이하, VFAs 농도가 12,000 mg-COD/L 이상으로 최적조건으로 규명되었다. 병합혐기성 소화 결과도 열화학적 가수분해 조건과 동일한 조건에서 가스발생량이 가장 높았다. 따라서, 음식물류 폐기물과 하수슬러지의 효과적인 병합혐기성소화를 위한 열화학적 가수분해 전처리 조건은 온도 140℃, NaOH 주입농도 60 meq/L 라 판단된다.
순산소의 MBR(Membrane Bio Reactor) 공정 적용을 통한 음식물류 폐기물 혐기성소화 유출수 처리 평가
박세용(Seyong Park),김문일(Moonil Kim),박성혁(Seonghyuk Park) 유기성자원학회 2021 유기물자원화 Vol.29 No.3
본 연구에서는 MBR 공정 내 폭기조에서 순산소 용해와 일반 공기 폭기의 효율에 대한 비교⋅평가를 통해순산소의 MBR 공정 적용성에 대해 평가 하였다. 순산소 장치에 의한 유기물 및 암모니아 산화 여부에 대해 평가하였으며, 실폐수(음식물류 폐기물의 혐기성소화 유출수) 적용 과포화산소용해 효율 평가를 진행하였다. 순산소용해와일반공기폭기 방법의 SCOD, 암모니아 제거율과 속도는 비슷하였다. 하지만, 순산소 용해에 의한 미생물 수율이 일반공기폭기법에 의한 미생물 수율보다 약 0.03 g MLSS-produced/g SCOD-removed 낮아 잉여슬러지 처리 비용이 감소될 수 있을 것이라 판단된다. 음식물류 폐기물의 혐기성 소화 유출수의 고농도 유기물 (4,000 mg/L) 및 암모니아 (1,400 mg/L)의제거율을 순산소용해와 일반공기폭기법을 비교한 결과, 순산소 용해기가 일반공기폭기법에 비해 유기물 제거율이약 13% 가량 더 높게 평가되었다. 또한, MLSS의 경우 일반공기폭기법이 순산소장치에 비해 0.3배가량 높았다. 이는, 순산소장치의 경우 폭기조 내에 용존산소가 충분히 유지, 공급되기 때문에 슬러지 자산화가 고도로 진행된 결과로판단되었다. 따라서, 고농도 유기물을 함유한 폐수 처리를 위한 방법으로는 기존에 많이 사용되었던 일반공기폭기법보다 순산소장치를 활용하는 것이 경제적인 면에서 더 유리할 것으로 판단되었다. In this study, the applicability of the MBR(Membrane Bio Reactor) process of oxygen dissolve was evaluated through comparison and evaluation of the efficiency of oxygen dissolve device and conventional aeration device in the explosive tank within the MBR process. The organic matter and ammonia oxidation by oxygen dissolve device were evaluated, and the efficiency of persaturation was evaluated by applying real waste water (anaerobic digester effluent treatement from food waste). SCOD and ammonia removal rates for oxygen dissolve device and conventional aeration device methods were similar. However, it was determined that the excess sludge treatment cost could be reduced as the yield of microorganisms by oxygen dissolve device is about 0.03 g MLSS-produced/g SCOD-removed lower than that of microorganisms by conventional aeration device. The removal rates of high concentrations of organic matter (4,000 mg/L) and ammonia (1,400 mg/L) in anaerobic digester effluent treatment from food waste were compared to the conventional aeration device and the oxygen dissolve device organic matter removal rate was approximately 13% higher than that of the conventional aeration device. In addition, for MLSS, the conventional aeration device was 0.3 times higher than for oxygen dissolve device. This is believed to be due to the high progress of sludge autooxidation because the dissolved oxygen is sufficiently maintained and supplied in the explosive tank for oxygen dissolve device. Therefore, it was determined that the use of oxygen dissolve device will be more economical than conventional aeration device as a way to treat wastewater containing high concentrations of organic matter.