http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
노재성,조성준,주재옥 에스케이텔레콤 (주) 2004 Telecommunications Review Vol.14 No.4
유선망을 기반으로 개발된 TCP/IP(Transmission Control Protocol/Internet Protocol)는 유선망의 네트워크 혼 잡을 효율적으로 제어하여 신뢰성있는 데이터 전송과 함께 높은 전송율을 달성할 수 있었다. 그러나 TCP가 높은 BER을 가지는 무선환경에 적용되면 낮은 전송율과 긴 지연시간을 초래하여 심각한 성능저하를 가져온다. 이것은 TCP 송신단이 무선링크상의 에러를 네트워크 혼잡으로 잘못 판단하기 때문이다. 본 논문에서는 Snoop 프로토콜을 기반으로 기지국에 적응 타이머(adaptive timer)를 적용한 새로운 기법을 제안한다. 이 기법은 무선 패킷 손실을 빠 르게 복구하기 위하여 무선링크의 상태에 따라서 기지국의 지역 재전송 타이머를 효과적으로 조정한다. 시뮬레이션을 통하여 제안한 방법이 무선 패킷 손실을 효과적으로 복구하여 TCP 전송율을 향상시킬 수 있음을 확인하였다.
(Cd+Te)막의 소결조건이 CdS/CdTe 태양전지의 특성에 미치는 영향
노재성,임호빈 한국전기전자재료학회 1988 電氣電子材料學會誌 Vol.1 No.1
Sintered CdS/CdTe solar cells have been farbricated by coating a (Cd+Te) slurry on sintered CdS films followed by the sintering at 625.deg.C for one hour with various heating rates. When cadmium and tellurinm powders are used instead of CdTe powder to form CdS/CdTe junction, CdTe is formed in the temperature range of 290.deg.C-400.deg.C. The microstructure of the CdTe films depends strongly on the heating rate of the sintering due to the low melting temperature and the high vapor pressure of the elemental Cd and Te. An optimum heating rate obtain CdTe films with uniform and dense microstructure which, in turn, improves the efficiency of the sintered CdS/CdTe solar cells. All-polycrystalline CdS/CdTe solar cells with an efficiency of 9.57% under 50mW/cm$^{2}$ tungsten light have been farbricated by using a heating rate of 14.deg.C/min.
라이시안 페이딩 채널에서 공간 다이버시티를 적용한 Pilot Symbol Assisted Multi-Carrier CDMA BPSK 시스템의 성능 분석
노재성,오창헌,김언곤,조성준 한국통신학회 2001 韓國通信學會論文誌 Vol.26 No.6
Multi-Carrier CDMA 시스템에서 불완전한 채널 예측과 다중사용자 간섭은 시스템의 성능 저하를 유발한다. 본 논문에서는 역방향 링크에서 파일럿 심볼을 이용하여 채널을 예측하는 Multi-Carrier CDMA BPSK 시스템에서 불완전한 채널 예측과 다중사용자 간섭의 영향을 연구하였다. 더욱이, 라이시안 페이딩 채널의 역방향 링크에서 최대비 합성 공간 다이버시티와 선택 합성 공간 다이버시티 기법을 적용한 성능 개선에 대하여 연구하였다. 수치계산 결과, 파일럿 심볼을 이용하여 채널을 예측하는 Multi-Carrier CDMA BPSK 시스템의 BER 성능은 등가 잡음 대역폭의 분산($\sigma$$^2$$_{c}$)에 매우 민감하나 무선 채널에서의 신호 전력 대 잡음 전력비에는 그리 심하지 않았다. 불완전한 채널 예측에 의한 BER 열화와 파일럿 심볼 간격의 최적화는 라이시안 페이딩 채널에서 Multi-Carrier CDMA BPSK 시스템의 BER 계산을 통하여 얻을 수 있었다. 그리고 불완전한 채널 예측에 의한 BER 열화는 신호 전력 대 잡음 전력비와 채널 예측 필터의 등가 잡음 대역폭에 관계하고 있음을 알 수 있었다.
규산나트륨으로부터 Tetrahydrofuran으로 추출된 규산을 이용한 Mullite 전구체 제조
노재성,홍성수,이범재,이병기,박은희,정홍호 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.8
콜로이드 졸-겔법에 의해 초미립자 mullite 분말을 제조하였다. Al2O3의 출발 물질로 aluminum isopropoxide $[Al(i-OC_3H_7)_3]$을, $SiO_2$ 출발 물질로 규산 나트륨으로부터 tetrahydrofuran(이후 THF로 약기함)으로 추출한 규산을 사용하였다. 규산 나트륨은 규산을 생성시키기 위하여 묽은 황산으로 산성화시킨 다음 THF로 추출하였다. Mullite 분말은 졸-겔법에 의해서 Si 추출율와 Na 제거율을 조사한 규산과 aluminum isopropoxide로 부터 합성되었다. THF로 추출한 규산의 불순물 함량은 0.04% 이하이었다. 합성된 mullite 분말은 $3Al_2O_3{\cdot}2SiO_2$ 조성을 갖고 불순물의 함량은 0.0462% 이하의 직경 $0.05{\mu}m$ 정도의 결정상이었다. EDS, XRD, TG/DSC, SEM, FT-IR, ICP, TEM등으로 mullite 분말의 특성을 조사하였다. Fine mullite precursor was prepared by colloidal sol-gel processes. Aluminum isopropoxide $[Al(i-OC_3H_7)_3]$ as a starting material of $Al_2O_3$ and silicic acid extracted by THF from sodium silicate as a starting material of $SiO_2$ were used. Sodium silicate was first acidified by dilute sulfuric acid to form silicic acid. ; followed by extraction using THF, Mullite precursor was synthesized by sol-gel processes from aluminum isopropoxide and sillicic acid considering the degree of extraction of Si and the removal efficiency of Na. The impurity content of silicic acid extracted by THF was below 0.04% Synthetic mullite precursor consisted of $3Al_2O_3{\cdot}2SiO_2$ and showd spherical particles of $0.05{\mu}m$ diameter and below 0.462% of impurites. The mullite precursor was characterized by EDS, XRD, TG/DSC SEM, FT-IR spectroscopy ICP and TEM.
무선 데이터 통신에서 MRC 다이버시티 수신시의 DS/CDMA-Trellis Coded QPSK 신호의 오율 해석
노재성,김영철,박기식,강희조,조성준 한국전자파학회 1998 한국전자파학회논문지 Vol.9 No.3
본 논문에서는 라이시안 페이딩, 다중 사용자 간섭, 다중경로 채널에서 MRC(Maximum Ratio Combining) 다이버시티 수신된 DS/CDMA-Trellis Coded QPSK 변조 신호의 패킷 오율 성능을 분석하였다. 그리고 직접 파 전력 대 반사파 전력의 벼($K_r$, , 다이버시티 가지의 수(M), 다중 사용자의 수(U), PN chip rate(PN), 다중 경로 채널의 수($L_p$), 패킷 길이(PL)를 함수로 하여 MRC 다이버시티 수신된 DS/CDMA-Trellis Coded Q QPSK 시스템의 성능과 용량올 구하였다. 해석 결과, 라이시안 페이딩($K_r$=6 dB), 5명의 다중 사용자 간섭,3개의 다중경로 채널에서 2가지(branch) 의 MRC 다이버시티를 적용한 DS/CDMA-Trellis Coded QPSK 시스댐은 2가지 (branch)의 MRC 다이버시 티를 적용한 부호화되지 않은 DS/CDMA BPSK 시스댐에 비하여 약 6 dB의 부호 이득이 있음을 알 수 있다. 그리고 AWGN 채널에 대해 디자인된 Trellis Coded QPSK 신호는 MRC 다이버시티 수신을 적용한 라이시안 페이딩 채널에서도 좋은 성능을 나타냉올 알 수 있다. 결과적으로 제안된 시스템 구조는 라이시안 때이딩, 다중 사용자 간섭, 다중경로 채널에서 무선 데이터 통신시스템으로서 적절하다고 예상된다. In this paper, we have analyzed the packet error probability of DS/CDMA-Trellis Coded QPSK modulation signal with MRC(Maximum Ratio Combining) diversity reception in Rician fading, multi-user interferences and multipath channel. And then we have evaluated the performance and capacity of DS/CDMA-Trellis Coded QPSK system using the MRC diversity reception as a function of direct power to indirect power ratio ($K_R$), the number of diversity branch(M), the number of multi-user(U), PN chip rate(PN), the number of multipath channel($L_P$), and packet length(PL). From the results, we know that the coding gain of DS/CDMA-Trellis Coded QPSK system with 2 branch MRC diversity is about 6 dB against uncoded DS/CDMA BPSK system with 2 branch MRC diversity in Rician fading ($K_R=6dB), 5 multi-user interferences, and 3 multipath channel. And, we know that coded QPSK signal designed for the AWGN channel also perform well on a Rician fading channel with MRC diversity reception. Consequently, we expected that proposed system structure is reliable to the wireless data communication system in Rician fading, multi-user interferences, and multipath channel.