http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
노재규,임남원,오정근,Noh, Jackyou,Lim, Nam-Won,Oh, Jung-Keun 해양환경안전학회 2015 海洋環境安全學會誌 Vol.21 No.2
본 연구에서는 공리적 설계 방법론에서 중요한 2가지 공리 중 독립공리를 시스템 개발에서 설계 기준으로 적용하였다. 기능 요구사항과 대응하는 설계 파라메터는 설계행렬을 구성하고 이를 이용하여 독립공리에 부합하는 설계 파라메터의 순서를 정한 후 블록 레벨링 시스템에서의 독립적 구성요소를 판별하였다. 이러한 공리적 설계의 결과로서 설계 순서에 맞는 블록 레벨링 시스템 구성을 도출하였다. 도출된 블록 레벨링 시스템 구성의 검증과 확인을 위해 블록 조립 현장에서 사용하고 있는 3차원 좌표 측정기인 토털 스테이션을 사용하여 실제 조립이 완료된 블록에 대하여 구현된 블록 레벨링 시스템을 적용하여 데이터를 비교하는 시험을 수행하였다. 토털 스테이션의 측정 데이터와 블록 레벨링 시스템의 수신 데이터를 비교하여 1 mm 이내의 정밀도로 블록 레벨링 시스템이 동작함을 검증하고 확인하였다. In this paper the independence axiom, one of two principal axioms of axiomatic design theory, is applied to the leveling system development as an design criteria. After functional requirements and corresponding design parameters constitute an initial design matrix for the leveling system, sequence, which is compatible with the independence axiom, of the design parameters of the design matrix is determined and independent components of block leveling system are revealed. As a result of axiomatic design, system configuration related to the design sequence is developed. In order to verify and validate the developed block leveling system, test with real hull block leveling work in site by using total station which is used to acquire three dimensional coordinate of target point is performed. Comparison with measured data and output data from the block leveling system shows the system accuracy is under 1 mm so that the developed system is verified and validated to be used in site.
시스템엔지니어링 기반 선체 곡가공 자동화 시스템 프로토타입 개발
노재규,오대균,Noh, Jac-Kyou,Oh, Dae-Kyun 해양환경안전학회 2011 海洋環境安全學會誌 Vol.17 No.3
선박의 건조 공정 중 병목공정에 해당하며 전적으로 숙련자의 수작업으로만 이루어지는 공정이 곡가공 공정이다. 이러한 곡가공 공정을 자동화 하고자 산업계와 학계의 많은 노력이 경주되었다. 기존의 곡가공 자동화 시스템 개발은 산업계와 학계에서 오랜 동안 연구되어 왔음에도 불구하고 실제로 생산현장에 투입되어 성공적으로 운영되는 사례는 없었다. 본 연구는 이러한 기존 곡가공 자동화 시스템 개발의 문제점을 파악하고 이를 해결할 수 있는 대안으로 요구사항 정의, 시스템 설계, 하부시스템 및 구성요소의 구현, 시스템 통합 및 검증의 4단계 시스템 엔지니어링 기반의 시스템 개발방법론을 제안하였다. 제안된 개발방법론을 기반으로 선체 곡가공 자동화 시스템 프로토타입 개발에 적용하고 결과를 고찰하여 기존 곡가공 자동화 시스템 개발에서의 문제점을 해결할 수 있는 대안이 될 수 있음을 확인하였다. One of the major technology issues in the ship production processes is the curved hull forming process that is a bottle neck and performed by experienced workers. In order to automate the curved hull forming process, there are a lot of attempts to develop the automation system by many shipbuilding companies and academic labs. However they have some problems which put the developed system in the difficulties to be used and maintained in the yard. In this paper, the problems are formed and solved by using tailored Systems Engineering Process which consists of four steps, those are requirement definition, system design, implementation of subsystem and components, and system integration and verification. A prototype for the proposed system development methodology is implemented. From the consideration of the prototype implemented, it is verified that this methodology can be an alternative to solve the problems.
레저선박과 CPS (Cyber-Physical Systems)
노재규,오대균 (사)한국CDE학회 2014 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2014 No.8
Pleasure boats are divided into two groups, motor boat and sail yacht. Motor boats are thrust by engine power, however sail yachts are thrust by wind power. In this research, applications of cyber-physical systems to motor boats in consideration of design, production, and operation are proposed. As to do this, the design, production, and operation of motor boats are introduced, and then definition of cyber-physical systems is explained. Two application ideas of cyber-physical systems to motor boats are proposed, those are coming alongside quay with boat and pitct control during run.