http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
나성현(Na Seonghyeon) 한국정보법학회 2011 한국정보법학회 정기세미나 발표자료 Vol.- No.7
★망중립성의개념 ★망중립성관?되淄?1. mVoIP ★망중립성관?되淄?2. 스마트TV ★망중립성논쟁의배경 ★망중립성논쟁의핵심이슈 ★주요국정책동향
나성현(Seonghyeon Na),최훈석(Hoonseok Choi),오광근(Kwangkeun Oh),김재훈(Jaehoon Kim) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.5
입자강화 복합재는 균열진전에 대한 저항력인 균열저항거동의 평가가 요구된다. 하지만 입자강화 복합재의 특성상 복잡하고 심한 비선형 거동을 나타내기 때문에 균열저항에 대한 저항을 나타내는 기준인 파괴인성을 측정하는데 많은 어려움이 있다. 본 연구에서는 입자강화 복합재를 선형 점탄성 재료로 가정하여 파괴인성을 평가하였다. 비선형 파괴거동 시험인 WST(Wedge splitting test) 시험편을 이용한 파괴인성시험을 수행하였으며 변형 전과 변형 후의 이미지를 비교하여 변위, 변형률을 측정하는 기법인 디지털이미지 상관법(Digital image correlation)을 이용하여 균열저항거동 평가에 필요한 데이터를 추출하였고, 변형률장을 가시화 하였다. 또한 ASTM E399 규격을 통해 파괴인성을 평가하였고, 시험온도는 50℃에서 ?60℃로 진행하였다. A particulate reinforced composite is required estimation of fracture crack resistance behavior about resisting power for crack growth. However, fracture toughness is hard to measure because of non-linear behavior. In this study, evaluation of crack resistance behavior was carried out under the assumption that the Particulate reinforced composite is a linear viscoelastic material. Wedge splitting test was performed on fracture toughness. Data for crack resistance behavior and strain fields obtained through the digital image correlation that is technique compared image of transformation. Also, it evaluated fracture toughness through ASTM E399 standard and the experiments are conducted in the range of temperature 50 ℃. to ?60 ℃.
직류전위차법을 이용한 분말야금 니켈기 초내열합금의 피로균열진전거동 평가
나성현(Seonghyeon Na),오광근(Kwangkeun Oh),김재훈(Jaehoon Kim) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.11
분말야금 니켈기 초내열합금은 항공기 터빈 엔진의 고온용 부품으로 사용된다. 본 연구에서는 분말야금 니켈기 초내열합금의 피로균열진전 시험은 상온과 600 ℃의 온도 조건에서 수행되었다. 피로균열 진전속도에 대한 평가방법은 ASTM E647에서 제시한 직류전위차법을 이용하여 산출하였다. 이러한 결과로부터, 분말야금 니켈기 초내열합금의 피로균열 진전 속도는 응력비 0.5 일 때 더 높고, 균열은 응력비 0.1 일 때 낮은 응력확대계수부터 시작한다. 파단면 관찰은 주사전자현미경을 이용하여 분석하였다. Powder metallurgy Nickel based superalloy is used to manufacture high temperature parts of turbine engine for airplane. In this study, fatigue crack growth tests for the material are conducted by temperature conditions at room temperature and 600 ℃. Evaluation method for fatigue crack growth rate calculated using DCPD method suggested by ASTM E647. From these results, fatigue crack growth rate of the material is higher when stress ratio is 0.5. When stress ratio is 0.1, crack begins from lower stress intensity factor. Fractography was carried out by Scanning Electron Microscope(SEM).
DIC에 의한 입자강화 복합재 추진제의 균열저항 특성평가
나성현(Seonghyeon Na),최훈석(Hoonseok Choi),오광근(Kwangkeun Oh),김재훈(Jaehoon Kim) 한국추진공학회 2015 한국추진공학회지 Vol.19 No.6
In this study, it is evaluated for fracture toughness to analyze crack resistance properties of particulate reinforced composite propellant. Fracture toughness test using WST specimen is conducted by temperature conditions from 50℃ to –60℃. Evaluation method for fracture toughness calculated using an equation suggested by ASTM E399 with linear elastic fracture mechanics. From these result, splitting loads and stress intensity factors of propellant increase according to decrease of test temperature. Also, the strain fields of specimen surface using digital image correlation increase as temperature decreased from 50℃ to –40℃, but it sharply decreases at –60℃ because of brittle behavior.
DCPD법을 이용한 분말야금 니켈기 초내열합금의 고온 피로균열진전거동
나성현(Seonghyeon Na),오광근(Kwangkeun Oh),김홍규(Hongkyu Kim),김동훈(Donghoon Kim),김재훈(Jaehoon Kim) 한국추진공학회 2016 한국추진공학회지 Vol.20 No.2
Powder metallurgy nickel based superalloy has been used in a high temperature part of turbine engine for airplane. The fatigue crack growth behavior was investigated using CT specimens for the materials at room temperature(R.T.), 600℃ and 700℃. The direct current potential drop(DCPD) method suggested by ASTM E647 was used to measure the crack length during fatigue crack growth at various stress ratios. The fatigue crack growth rate at R=0.5 was faster than that at R=0.1 for all temperature conditions and increased with the increase of stress ratio and temperature. Fractography was conducted for analysis of fracture mechanism.
DIC법에 의한 입자강화 복합재료의 파괴에너지 및 변위장 특성
이정원(Jeongwon Lee),나성현(Seonghyeon Na),김재훈(Jaehoon Kim),이상연(Sangyoun Lee),박재범(Jaebeom Park),정규동(Gyoodong Jung) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
본 연구에서는 입자강화 복합재료의 파괴에너지와 변위장 특성에 대하여 분석하였다. 쐐기쪼갬 시험을 재료가 노출될 수 있는 온도인 상온, -40℃와 –60℃에서 수행하여 각 온도에 따른 재료의 파괴에너지를 산출하였다. 변위장과 변형률장은 DIC법을 활용하여 가시화 하였다. 변위장은 DIC를 이용한 표시추적방법에 의해 측정하였다. 시험 결과, 온도가 낮아질수록 파괴에너지는 감소한다. 표면 변위장은 상온과 –40℃에서 유사하였고, -60℃에선 입자간화 복합재료의 취성거동으로 인하여 크게 감소하였다. 변형률장에선 온도가 내려갈수록 전체적인 변형율범위가 감소하는 것을 나타내었다. In this study, is evaluated the fracture energy and displacement fields properties of particulate reinforced composite. Wedge splitting test were performed at various temperatures. Fracture energy of material is calculated at room temperature, -40℃ and –60℃. Displace and strain fields of specimen surface visualize using digital image correlation. The surface displacement fields of specimens was analyzed by mark tracking method using digital image correlation. In these results, fracture energy is decreased as temperature decreased. The surface displacement fields are similar at room temperature to –40℃. The surface displacement fields at –60℃ is significantly reduced because of brittle behavior. The general strain fields of specimen surface decrease as temperature decreased form R.T. to –60℃.