http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
염수 및 Sour gas환경에서 고 망간강의 내식성에 미치는 합금원소 Mn, Cr의 영향
김희산,현영민,이순기 한국표면공학회 2013 한국표면공학회 학술발표회 초록집 Vol.2013 No.5
자동차 및 에너지 산업의 적용을 목표로 고망간강의 기계적 성질 향상 연구가 활발히 진행된 반면 내식성 연구는 미비하다. 본 연구에서는 염수 환경 및 H2S 환경에서 4종의 고망간강의 내식성에 미치는 크롬 및 망간의 영향을 조사하였다. 비교재로 사용된 탄소강 대비 실험재의 부식 속도는 침지 실험을 통해 얻어졌다. 또한 내식성 기구 고찰을 위하여 상평형 프로그램을 통하여 녹 층을 예측하고, 침지실험으로부터 얻어진 녹 층을 XRD, SEM-EDS 및 TEM-EDS로 분석하였다. 3.5% NaCl 용액에서 크롬 및 망간이 모두 내식성을 향상시킨 반면, synthetic seawater에서는 크롬만이 내식성을 향상시켰다. 또한 이들 염수 환경과 달리 H2S 환경에서 크롬과 망간 모두 내식성을 향상시키지 못했다. 환경에 따라 강의 내식성에 미치는 합금 원소의 영향이 상이한 원인은 각각의 환경에서 형성된 녹층의 구성 물질의 차이에 의한 것으로 이에 대하여는 본문의 된 녹 층 분석 결과에서 자세히 설명되었다.
金熙山,李在坤 忠南大學校 1962 論文集 Vol.2 No.-
In general, the contraction of thread in a fabric can be determined by the following factors such as tension, ends or picks per inch, weaves, counts and turns per inch. In order to simplify the calculation we ignored the effects of tension and twists on contraction, and classified the fabric as follows: a) a square fabric b) a fabric whose angle of curvature of warp or weft proceeds the other. c) a fabric whose angle of curvature of warp or weft slightly differes from the other. Firstly, we determined the maximum possible density of warp or weft as follows: D=1/cosθ(de+df) where θ; angle of curvature de; dia. of warp df; dia. of weft D; maximum possible density of warp and weft. The results are as follows L = {I×C×(de+df)×n/D}×D/N where L; original length of warp or weft in a unit length of fabric. I; number of curvature in a repeat due to weaves. C; constant of angle of curvature. n; number of threads that continuously float in a repeat due to weave. And on the variation of tension during weaving we analysed the variation of tension due to three principal motion of loom and classified the nature of variation as follows; such as a) tension which varies continuously during weaving b) tension which varies intermittenly during weaving And summerized as follows; A) tension which varies according to shedding and beating motion varies intermittenly B) tension which added to the warpbeam increases by the decrease of warp beam dia. C) tension which varies according to letting off and taking up motion varies intermittently or continuously by the mechanism.