http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김홍석 ( Hong-suck Kim ),김병군 ( Byung-goon Kim ),서인석 ( In-seok Seo ),김연권 ( Youn-kwon Kim ) 한국환경기술학회 2008 한국환경기술학회지 Vol.9 No.3
전처리 기법별 감량화 및 가용화 특성을 평가하기 위해 마이크로파, 오존, 열, 알칼리, 초음파, 알칼리-초음파 및 알칼리-오존 전처리 기법이 연구되었다. 단독처리기법 중에 알칼리와 오존이 가장 높은 감량화율 및 가용화율을 보여주었고 감량화율 면에서 볼 때 알칼리 전처리 기법이 오존 전처리 기법보다 조금 더 높았다. 또한, 복합처리기법 중에서는 알칼리-오존 전처리 기법이 가장 좋은 감량화율 및 가용화율을 보여주었다. NaOH 30 meq/L와 0.32 g O<sub>3</sub>/gSS에서의 감량화율과 가용화율이 회분식 실험에서 각각 39.8%와 41.6%를 나타냈으며 계속되는 실험에서 감량화율 및 가용화율은 알칼리-오존 처리법에 의한 회분식 실험에서 보다 10% 낮았다. 또한 알칼리-오존 복합처리(오존과 알칼리가 하나의 반응조에서 전처리됨)기법과 알칼리-오존(알칼리 처리후에 오존이 사용됨)전처리법은 조금 더 높은 가용화율을 보여주었다. 고도처리공정의 외부탄소원으로의 이용과 운영관리 측면에서도 알칼리-오존 복합처리(오존과 알칼리가 하나의 반응조에서 전처리됨)기법이 더 나을 것으로 사료된다. In order to evaluate the pre-treatment techniques for reduction and solubility, microwave, ozone, heat, alkali, ultrasonic, alkali-ultrasonic and alkali-ozone pre-treatment were investigated. Among the independent use of pre-treatment, alkali and ozone showed the highest reduction rate and solubility. In reduction rate, alkali pre-treatment was little higher than ozone pre-treatment. However, in solubility, ozone pre-treatment was little higher than alkali pre-treatment. Also, among the incorporative use of pre-treatment, alkali-ozone pre-treatment was the best pre-treatment for reduction and solubility. At 30 meq/L of NaOH and 0.32 gO<sub>3</sub>/gSS, the reduction rate and solubility was 39.8%(VSS) and 41.6% respectively in batch test. In continuous test, the reduction and solubility was 10% lower than in batch test by alkali-ozone treatment. Moreover, incorporative use of alkali-ozone (ozone and alkali is pre-treated in one reactor) pre-treatment and alkali-ozone (after alkali treatment, ozone is used) pre- treatment showed the almost same reduction rate. However alkali-ozone (after alkali treatment, ozone is used) pre-treatment showed somewhat higher solubility. For the use of external carbon source of advanced wastewater treatment process and operation & management, incorporative use of alkali-ozone (ozone and alkali is pre-treated in one reactor) pre-treatment is thought to be better.
친환경 수처리 기술을 통한 하천수 수질 개선 연구 (침투지)
김홍석 ( Kim Hong Suck ),김동섭 ( Kim Dong Sup ),김병군 ( Kim Byung Goon ),이선주 ( Lee Sun Ju ),강석형 ( Kang Suk Hyung ),최일환 ( Choi Il Hwan ),한소정 ( Han So Jeong ) 한국물환경학회 2020 한국물환경학회·대한상하수도학회 공동 춘계학술발표회 Vol.2020 No.-
상수원수 및 하천수의 수질 개선을 위하여 친환경적인 수처리 기술의 적용 가능성을 확인하고자 실규모의 친환경수처리 가늠터 (test-bed)를 구축 및 운영을 하였으며, 모래를 여재로 활용한 침투지(상부 식생 포함)의 동절기를 포함한 운전을 통해 수처리 효율을 평가하였고, 그 결과 동절기 수온 저하 시에도 질소를 제외한 수질항목들의 수처리 효율에 큰 영향 없이 안정적인 수처리 효율을 유지하는 것을 확인하여 상수원수 및 하천수의 수질 개선에 친환경 수처리 기술의 적용 가능성을 확인할 수 있었다.
침지식 공기호흡 미생물연료전지에서 환원전극재료 및 전극비가 에너지 생산에 미치는 영향
김홍석 ( Hong Suck Kim ),곽지훈 ( Ji Hoon Kwak ),김병군 ( Byung Goon Kim ),김연권 ( Yeon Kwon Kim ) 한국수처리학회 2014 한국수처리학회지 Vol.22 No.4
A submerged air-cathode microbial fuel cell (SA-MFC) was evaluated according to cathode materials and anode-cathode surface area ratios (A/C ratio). When a C-cathode (capacity deionization electrode) with catalyst (CuPC+FePC), a C-cathode without catalyst and a M-cathode (CNT-base MFC electrode) with (CuPC+FePC) were applied to SA-MFC, the maximum power densities were 1.5 W/㎥, 5.2 W/㎥ and 5.5 W/㎥ respectively. A C-cathode with catalyst showed the similar maximum power density to a M-cathode with catalyst and is inexpensive compare to a M-cathode. Therefore, it is thought to be that a C-cathode with catalyst can be one of the cost effective cathodes for the MFC. When A/C ratios were changed from 1:1 to 1:2, 1:4 and 1:8, the maximum power densities of each surface area ratio were 1.1 W/㎥, 1.7 W/㎥, 2.3 W/㎥ and 3.5 W/㎥ respectively. As the A/C ratio increased, the maximum power density was also increased. It is thought to be that the cathode surface area is major limiting factor for energy generation in a SA-MFC.