최근 5년간 원발성 남성불임증 환자의 임상적 분석

김태형,김경도,김세철,Kim, Tae-Hyoung,Kim, Kyung-Do,Kim, Sae-Chul 대한생식의학회 1994 Clinical and Experimental Reproductive Medicine Vol.21 No.3

A clinical investigation was undertaken on primary male infertility patients of recent 5 years. The results obtained were as follow: 1. Suspective etiologic factors were: 1) testicular failure, 36.1 %; 2) varicocele, 18.7%; 3) endocrine abnormality, 13.5%; 4) obstruction, 13.5%; 5) idiopathic, 10.9%; 6) cryptorchidism, 2.6%; 7) necrospermia, 0.9%. 2. On semen analyses, azoospermia was found in 55.8%, single abnormal parameter in 21.5 %, and multiple/all abnormal parameter in 22.7% of the 163 cases. 3. For the evaluation of the sensitivity and specificity of noninvasive variables in predict in obstruction as the cause of azoospermia in patient who had undergone testicular biopsy, the testicular size and serum follicle-stimulating hormone(FSH) level revealed 100% of sensitivity. 4. Among the 43 patients with a testicular biopsy confirmed diagnosis there was a significant difference in testicular size, ejaculate volume(p<0.0001) and serum FSH(p<0.0001) between patients with testicular failure and those with ductal obstruction. 5. Of 93 treated patients with primary male infertility, 42 were managed by medical treatment including endocrine treament, retrograde ejaculation treatment, infection treatment and observation; 29 were managed by surgical treatment including varicocelectomy, vasovasostomy, vasoepididymostomy and TUR of ejaculatory duct; 20 were managed by sperm preparation treatment including artificial insemination(AI), electroejaculation plus AI and vibration ejaculation plus AI ; 2 were managed by microscopic epididymal sperm aspiration plus IVF, repectively. 6. 42 patients who could be followed-up, 21 patients(50%) impregnated their wives.

PDE 기반의 이미지 인페인팅을 이용한 시신경 원판 경계 검출에 관한 연구

김태형,김성현,김진만,공재응,김두영,Kim, Tae-Hyoung,Kim, Seng-Hyen,Kim, Jin-Man,Gong, Jae-Woong,Kim, Doo-Young 한국융합신호처리학회 2007 융합신호처리학회 논문지 (JISPS) Vol.8 No.4

본 논문은 실명(loss of eyesight)의 원인 중 하나인 녹내장의 진행과 진단 등의 의료 정보제공을 목적으로 양방향 곡선 전개 방식을 이용하여 망막 영상에서 시신경 원판(optic disk)의 경계를 검출하는 방법을 제안한다. 정확한 경계 검출을 위하여 PDE 기반의 Image inpainting 방법으로 시신경 원판 위를 지나는 혈관을 제거하고 전처리 과정에서 발생하는 잡음제거와 경계의 보존을 위해 비등방성 필터링(anisotropic filtering)을 행한다. 혈관이 제거된 망막 영상에서 시신경 원판의 경계 검출은 초기 곡선에 강인한 양방향 곡선 방식으로 검출한다. 실험결과, 제안한 방법이 전체영상의 블러링 현상뿐만 아니라 시신경 원판 경계의 블러링 현상을 줄일 수 있었고, 기존의 방법에 비하여 정확한 경계를 검출할 수 있었다. This paper describes a technique for detecting the boundary of the optic disk in digital image of the retina using inward and outward curve evolution. Optic disk boundary offers medical information about glaucoma progresses. For accurate boundary detection, image inpainting based on PDE removes blood vessels crossing the optic disk. For removing noises and preserving boundary of optic disk in image inpainting process, the anisotropic diffusion filtering is developed. After pre-processing, the optic disk boundary is determined using inward and outward curve evolution. Experimental results show that blurring effect of original region and optic disk boundary is reduced considerably. By the proposed method, we can detect correct disk boundary compare to conventional method.

콘크리트 전과정 $CO_2$ 배출량 및 경제성 평가 시스템(SUSB-CLAS) 개발

김태형,박정훈,태성호,Kim, Tae-Hyoung,Park, Jung-Hoon,Tae, Sung-Ho 대한건축학회 2011 대한건축학회논문집 Vol.27 No.12

The main reason of the earth global warming is $CO_2$ and the regulation about it in the whole world has been reinforced to reduce $CO_2$ emission. It is needed that we should reduce it in the process at the production of concrete generated much of $CO_2$ emission as the primary material of construction industry recognized unfriendly environment industry. Based on a concrete, this study was constructed the Assessment system of $CO_2$ emission and economical efficiency in the life cycle of concrete to evaluate $CO_2$ emission generated in the stage of material production, transportation, manufacture using optimal design techniques. This study evaluates $CO_2$ emission and economical efficiency of ready-mixed concrete according to producing companies or standards, using the proposed program in this study, which is the assessment program of $CO_2$ emission and economical efficiency in the life cycle of concrete(SUSB-CLAS). $CO_2$ emission basic unit and economical efficiency DB in various concrete types are constructed throughout this study and will be used for prediction of $CO_2$ emission and economical efficiency in concrete industry and for fundamental resource for reducing $CO_2$ emissions.

지속가능한 콘크리트의 개발을 위한 에코효율성 평가방법 제안

김태형,채창우,Kim, Tae-Hyoung,Chae, Chang-U 한국건설순환자원학회 2016 한국건설순환자원학회지 Vol.11 No.4

민속마을 문화재구역 내 건축물 보존현황에 관한 조사연구 - 제주 성읍마을의 성외지역을 대상으로 -

김태형,Kim, Tae-Hyoung 한국농촌건축학회 2021 농촌건축 : 한국농촌건축학회논문집 Vol.23 No.3

This study aimed to analyze the current status of preservation of buildings in the Cultural Heritage Zone of folk village. Since actual residents inhabit and live in cultural properties, for instance a folk village, so their original forms have been changed over time responding to changes of the social environment. So this present study selected one folk village, located in the largest cultural heritage zone and lived most resident in our country, after which investigated its deformation process. This study also conducted in-depth analysis relying on the data collected from aerial photographs, field surveys, building ledgers. In particular, such analysis focused on changes in unauthorized alteration to the existing state that have been attempted so far. As a result, various variations were found in a number of buildings, caused from damages to landscape of cultural assets. Finally, the reasons for such deformation were interpreted to utilize as future references for restoration of the folk village landscape.

순환골재가 혼입된 콘크리트의 환경부하(온실가스) 평가를 위한 기초연구

김태형,Tae-Hyoung Kim 한국건설순환자원학회 2023 한국건설순환자원학회지 Vol.18 No.1

A Study on the Material Properties of Grey Cast Iron for Cylinder Liner Treated by Thermo Plastic Deformation Process

김태형,김종호,Kim Tae-Hyoung,Kim Jong-Ho Korean Society of Marine Engineers 2005 한국마린엔지니어링학회지 Vol.29 No.6

In internal combustion engines the usual material for the cylinder liner is because of its good wear resistance Apparently this wear resistance arises from the at iron to form a hard glazed surface when under sliding friction. When the cylinder liner wear limits, it shall be replace with new one according to the classification soci manufacturer's standards. However, adoption of alternative repairing method such a metalizing, thermo plastic deformation process became inevitable taking enormous cost renewal into consideration. In this paper. the material properties of cylinder liner of grey discussed on the basis of the results of experimental work of the thermo plastic deformation the worn out cylinder liner made of grey cast iron.

Glass Fiber Post와 Composite Resin Core의 전단결합강도

김태형,심준성,이근우,Kim Tae-Hyoung,Shim June-Sung,Lee Keun-Woo 대한치과보철학회 2005 대한치과보철학회지 Vol.43 No.4

Statement of problem : Fracture of composite resin core will be occulted by progress of crack. Bonding interface of different materials has large possibility of starting point of crack line. Therefore, the bond strength of glass fiber post to composite resin core is important for prevention of fracture. Purpose: This in vitro study tried to find out how to get the higher strength of glass fiber post to composite resin core through surveying the maximum load that fractures the post and cote complex. Materials and methods: 40 specimens made with glass fiber Posts(Style $post^{(R)}$, Metalor, Swiss) and composite resin core ($Z-100^{(R)}$, 3M, USA) were prepared and loaded to failure with push-out type shear-bond strength test in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with four different surface treatments. With the data. ANOVA test was used to validate the significance between the test groups, and Bonferroni method was used to check if there is any significant statistical difference between each test group. Evely analysis was approved with 95% reliance. Results: On measuring the maximum fracture load of specimens, both the treatments of sandblasted and acid-etched one statistically showed the strength increase rather than the control group (p<0.005). The scanning electric microscope revealed that sand blasting made more micro-retention form not only on the resin matrix but on the glass fiber, and acid-etching contributed to increase in surface retention form, eliminated the inorganic particles in resin matrix. Specimen fracture modes investigation represented that sand blasted groups showed lower bonding failure than no-sand blasted groups. Conclusion: Referring to the values of maximum fracture load of specimens, the bonding strength was increased by sand blasting and acid-etching.

펌핑 구조에 따른 1 kW급 협대역 편광 유지 광섬유 레이저의 출력 특성 연구

김태형,정성묵,김기혁,이성헌,양환석,Kim, Tae Hyoung,Jeong, Seong Mook,Kim, Ki Hyuck,Lee, Sung Hun,Yang, Hwan Seok 한국광학회 2021 한국광학회지 Vol.32 No.4

본 논문에서는 주 증폭기가 양방향 펌핑 방식인 MOPA (master oscillator power amplifier) 협대역 고출력 광섬유 레이저를 제작하였으며, 제작된 레이저의 출력 특성을 연구하였다. 이터븀이 도핑된 코어 25 ㎛, 클래드 400 ㎛ 편광 유지 광섬유를 사용하여 주 증폭부를 제작하였으며, 신호 광원은 PRBS (pseudo-random binary sequence) 신호에 의해 위상 변조된 3 GHz, 10 GHz의 선폭을 갖는 광원을 사용하였다. 3 GHz의 선폭을 가진 신호 광원을 이용하여 순방향과 역방향 펌프 비율을 조절하며 SBS (stimulated Brillouin scattering) 특성을 분석하였다. 10 GHz의 선폭을 가진 신호 광원을 이용하여 주 증폭기의 펌핑 비율에 따른 TMI 특성을 분석하였다. 순방향 및 역방향 펌프 비율을 1.6:1로 입사시켰을 때 주 증폭기의 출력을 1 kW까지 증폭하였으며, 기울기 효율과 빔 품질(M²)은 각각 80%, 1.36으로 측정되었다. This paper presents a study of laser output characteristics. We fabricated a MOPA (master oscillator power amplifier)-type high-power, narrowbandwidth fiber laser with a bidirectional pumping configuration in its main amplifier. As signal beams, light sources with bandwidths of 3 GHz and 10 GHz-phase-modulated through a PRBS (pseudo-random binary sequence)-were used interchangeably. Furthermore, the characteristics of the SBS (stimulated Brillouin scattering) were analyzed using a signal beam with 3 GHz bandwidth, by adjusting the forward to backward pumppower ratio. Moreover, the characteristics of the transverse mode instability were analyzed by adjusting the forward to backward pump-power ratio, using a signal beam with 10-GHz bandwidth. Finally, the output power from 10 GHz bandwidth was amplified to more than 1 kW using a forward to backward pump-power ratio of 1.6. The beam quality M² was measured to be approximately 1.36, and the optical-to-optical efficiency was 80% at maximum output power.

서울 ${\cdot}$ 경기지역 냉면전문점의 서비스 품질에 대한 중요도 평가

김태형,오유진,이영미,Kim, Tae-Hyoung,Oh, Yu-Jin,Lee, Young-Mee 한국식생활문화학회 2007 韓國食生活文化學會誌 Vol.22 No.1

The purpose of this study was to analyze evaluation variables of service quality of Korean restaurant especially focused on cold noodle restaurants(CNR). The data were analyzed about customer’s expectation of food service quality, service quality was improved by employee’s service in restaurant and employee education in the focus on CNR. The survey was carried out 423 customers and 50 employees in Seoul and Kyunggi province. All statistical data analyses were conducted using the Statistical Package for the Social Science(SPSS version 10.0). The consumer’s evaluation score of service quality were significantly different by consumer’s characteristics. The well planned service at CNR must be developed according to consumer variables such as sex and age group. The evaluation score of service quality were not significantly different by seasonal variation and consumer’s menu selection. The evaluation score of service qualities in CNR were significantly different between customer variables with employees variables. All of the evaluation points of service quality in employees were significantly higher than customers. This result was show that well-trained employees were important factors in consumer satisfaction. Through the employee education program, consumer oriented service mind mort be to developed in employees and employees’ recognition about the importance of service increased the satisfaction of customer using CNR.