http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sn- Bronze 계 마찰재료의 소결중 미세조직의 변화
김주완,송영두,강복석,강수석,강석중 대한금속재료학회(대한금속학회) 1989 대한금속·재료학회지 Vol.27 No.2
The microstrure evolution of a 78.0 Cu-7.1 Sn-12.5 Fe-2.4 Pb(wt%) alloy, metal composition of a typical Cu-Sn base friction material, has been studied during pressure (1.5 Mpa) and pressureless sintering up to 810℃ for various times. Overall microstructural changes during sintering were found to be determined by the reaction between Cu and Sn. The Sn melts upon heating spread alone the capillaries leaving pores at their sites and form ε phase. The pores collapsed during subsequent pressure sintering at higher temperatures. Upon heating ε phase appeared to transform into γ and β phases, which remelted eventually by reverse peritectic reactions. Fores, however, formed again at the sites of the intermediate phases, when the sintering pressure was relieved in the temperature range of peritectic reactions. Remelting of the intermediate phases could thus enlarge the size of pores in Cu-Sn base materials. A good homogeneous microstructure was obtained after sintering at 810℃ for about 1 hr under 1.5 Mpa.
메탄올-올레핀 전환 반응용 순환유동층반응기내 코크특성 및 공정 최적화 기술개발
김주완,정순용,김정랑,이수언,이유진,정광은 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.0
본 연구는 메탄올로부터 경질올레핀(MTO)을 제조하는 순환유동층 공정운전에 관한 것으로, 다양한 공정변수들이 메탄올 전환율 및 올레핀 선택도에 끼치는 영향에 대한 연구이며, 보다 구체적으로, 반응시 빠르게 비활성화되는 촉매의 코크 함량이 올레핀 선택도에 미치는 영향과 올레핀 수율이 최대화될 때의 탄화수소종에 대한 성분 분석을 통해서, 공정운전시 재생기의 운전조건을 최적화 시킬 수 있는 방법을 연구하였다. 또한, 메탄올 전환율에 영향을 끼치는 공간속도 및 체류시간을 조절 하며, 반응시 올레핀 선택도에 영향을 미치는 온도를 변화하여 경질올레핀 생산성을 높이기 위환 최적조건을 제시하고 있다.
Effect of Epimedium Koreanum on the 2-Bromopropane Induced-Reproductive Damage
김주완,김홍태,이성동,임미경,구세광,박현정,오태호,이근우 한국임상수의학회 2010 한국임상수의학회지 Vol.27 No.5
Epimedium koreanum nakai (EKN) has been used for treatment of reproductive disorders. In this study,we evaluated the effects of EKN water extract on the 2-bromopropane (2-BP) induced reproductive dysfunction. The daily sperm production (DSP), sperm counts and histological changes of reproductive organs were investigated after 4 weeks of EKN administration in 2-BP induced reproductive damaged rats. Although the weights of epididymis and seminal vesicle were increased dose-dependently, they were lower than control group. DSP of EKN-dosing groups were increased compared to control group. In EKN-dosing groups, the number of degenerative seminiferous tubules and the number of epididymal tubules showing epithelial cell vacuolation and decreased spermatozoa in the lumen were significantly (p < 0.01) decreased compared to control group dose-dependently. Significant (P < 0.05 or P < 0.01)increases of the number of sertoli cells, spermatogonia, patchytene spermatocytes, round spermatids and elongated spermatids were observed in EKN-dosing groups compared control group. Consequently, based on the results, EKN water extract could treat 2-BP induced reproductive damages dramatically.
해운계 영 마이스터의 취업활성화를 위한 현장실무능력 향상 프로그램 개발 연구
김주완 한국해양교통학회 2022 한국해양교통학회 학술대회자료집 Vol.2022 No.2
정보통신기술의 급격한 발전으로 시작된 4차 산업혁명과 관련 기술의 영향으로 인하여 기존의 산업과사회 전반에 새로운 트렌드가 형성될 것으로 전망한다. 해운산업 부분에서는 주요 해운국이 4차 산업 관련주요 기술을 해운에 접목하여 활용을 확대해 나가고 있으며, 향후 경쟁은 더 심화될 것으로 보고 있다. 특히 해운산업의 제반 환경은 빠르게 변화하고 취업 경쟁이 심해지고 있는 상황 속에서 영 마이스터의현장실무능력과 취업역량을 강화해 나가야 할 필요가 있다고 본다. 선원의 교육은 해운산업 관련 기술및 제도의 변화와 비교하여 상대적으로 천천히 변화하는 경향이 있다. 그러나 현재의 해운산업을 둘러싼변화의 속도는 과거와 비교하여 매우 빠르게 진행되는 상황이다. 따라서 선원 교육기관 역시 해운산업의변화되는 상황을 계속해서 모니터링하고 새로운 기술과 제도에 따른 교육 수요를 예측하며 준비해야 한다. 본 연구의 목적은 현장실무능력을 강화할 수 있는 교육 시스템을 개발하고, 취업의 양과 질의 개선을 도모할 수 있는 시스템을 구축하는 것이다. 이를 위하여 3D 컴퓨터 그래픽 형태의 교육 자료를 개발하며, 자료를 활용한 학습의 효과를 제시하였다. 그리고 입출항 실무능력 향상을 위한 예선조종이 융합된 프로젝트 학습을 시행하고 그 효과를 확인해보고자 한다.
Effect of Beta-Glucan on the Collagen-Induced Rheumatoid Arthritis
김주완,조형래,김기영,구세광,이형식 한국임상수의학회 2010 한국임상수의학회지 Vol.27 No.4
The effect of beta-glucan (PolycanTM) derived from Aureobasidium pullulans SM-2001 were observed on collagen-induced rheumatoid arthritis (RA) in DBA mice. Six week-old male DBA/1J mice were immunized by the intradermal injection of 200 μg of bovine type II collagen with the equal volume of complete Freund’s adjuvant at the tail base on day 1. On day 21, the mice were boosted by the intradermal injection of 200 μg of bovine type II collagen with incomplete Freund’s adjuvant. From the first immunization, mice had been administered PolycanTM (21.25, 42.5 and 85 mg/kg), diclofenac and vehicle once a day for 4 weeks, respectively. Collagen-induced hyperimmunities and arthritis signs were markedly and dose-dependently inhibited by treatment of PolycanTM compared with RA control except for tibial cartilages of PolycanTM 21.25 group. PolycanTM effectively inhibited the histopathological changes of collagen-induced arthritis and hyper-immunities.
탄탈륨/실리카 구형 성형촉매를 사용한 에탄올로부터 1,3-부타디엔 제조
김주완,김정랑,김철웅,김태완,채호정,정순용 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
석유대체원료인 에탄올로부터 1,3-부타디엔 제조(ETB)에 관한 Pilot 규모의 반응기용 촉매 개발을 위해 실리카 지지체를 사용하여 탄탈륨 금속을 함침시켜 촉매를 제조하였다. 본 연구에서는 실리카 지지체가 ETB 반응활성에 끼치는 영향을 알아보고자 하였으며, 탄탈륨 금속의 담지량에 따른 반응 활성을 비교하였다. Pilot 반응기의 형태에 따라 분말촉매의 성형방법이 달라지며, 고정층 반응기는 사출성형을 통하여 촉매강도를 증가시키며, 유동층 및 순환유동층 반응기는 촉매의 흐름성향상을 위하여, 마모강도가 높은 미소구형의 성형촉매를 사용한다. 본 연구에서 고정층 반응기에 적용하기 위한 촉매로 사출성형 전 단계로 탄탈륨 금속을 Mesoporous SBA-15 실리카담체와 Fumed 실리카 담체에 담지시켜 반응활성을 비교하였으며, 순환유동층반응기에 적용하기 위한 촉매는 구형 실리카 담체를 사용하였다. 성형된 촉매의 반응활성과 특성분석을 통해 상기 촉매들의 공정 적용가능성을 살펴보았다.