http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김종택,손종락,최원형,김해원 한국화학공학회 1979 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.17 No.5
경북 동해지방에서 채집한 天然沸石 또는 silicate중 대표적인 8가지의 試料를 化學分析, D.T.A, 및 X-線廻折法으로 분석한 결과 沸石은 石英과 長石이 많이 섞인 cilinoptilolite가 主成分이었으며 드물게 heulandite와 mordenite를 확인할 수 있었다. 그 이외 silicate로서 montmorillonite, kaolinite 와 illite의 존재를 확인할 수 있었다. HCl 및 NaOH 용액으로 처리된 試料는 H₂O, C₂H_5OH, 및, C_6H_6 에 대한 吸着劑로서의 활성이 있었으며, 또한 이들 시료의 CO 및 CO₂ gas 에 대한 흡착량도 1기압 25℃에서 측정되었다. 그리고 天然 沸石과 Linde molecular sieve의 吸着量을 비교한 結果, 酸一鹽基 연속처리한 天然 沸石이 H₂O, C₂H_5OH, C_6H_6 및 다른 gas 에 대하여 우수하였다. The eight representative samples of zeolites or silicates obtained from eastern coastal area of Kyungpook ware analyzed by means of chemical wet method, DTA and X-ray diffraction. As the result, it was recognized that the primary species of zeolite was known to be clinoptilolite mixed with quartz and feldspar. Very seldom heulandites or mordenites were also found. Montmorillonite, kaolinite and illite ware also known as components of silicates. And the samples treated with HCl or NaOH solution were activated to be the adsorbent for the adsorption of vapors of H₂O, C₂H_5OH and C_6H_6 through Diamond Kinter method. The adsorption capacities of these minerals against CO and CO₂ gas under 1 atm 25℃ were also measured by modified B.E.T. method. And the comparisons between the measured adsorption capacities of natural zeolites and Linde molecular sieve were made. The natural zeolites prepared by the acid-base consecutive treatment exhibited to be good adsorbent for H₂O, C₂H_5OH, C_6H_6 and other gases.
김종택 대한양계협회 1993 월간 양계 Vol.25 No.9
요즈음 날씨같이 낮에는 전형적인 혹서기를 나타내나 밤이되면 썰렁해져서 자다가도 이불을 찾게 되는데 이런 경우 병아리는 어떤 영향을 받게될까? 병아리날개는 피부보다도 더 예민하여 저온 스트레스를 받게되면 금방 흉터가 생기게 되며 이는 환우를 할때까지 없어지지 않는다. 또한 복부를 덮고 있는 피부는 종이같이 얇으며, 자체 체온조절기능이 미숙하여 외부의 기온영향을 장기에 바로 받게된다. 번개가 치고 난 이후 변압기 등이 손상되었을때 폐사가 많이 나는 이유도 이런데 있는 것이다. 온도관리가 그만큼 중요하다는 이야기이며 성장과도 직결되는 문제이다. 그러나 계절차이, 일교차, 수용시설, 수용수수 과다 등으로 실제 온도관리는 어려움도 많이 따르며 제대로 되지 않는 경우도 많이 볼 수가 있다. 더군다나 요즘같은 날씨에서는 더욱더 그러하다. 병아리는 입추 후 어느 일령에 다다르면 원래 가지고 있던 솜털을 벗으면서 첫번째 환우를 하게되는데 이것으로 병아리 상태파악과 관리에 응용할 수 있는 방법은 없을까?
이온교환된 X 형 및 Y 형 제올라이트의 탈알루미늄에 대한 X 선 광전자분광학적 해석
김종택,김명철 한국화학공학회 1990 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.28 No.4
1N 금속염화물 수용액을 사용한 이온교환반응에서 X형 및 Y형 제올라이트로부터 Al 원자가 빠져나가는 탈알루미늄 현상에 대해 양이온의 영향을 조사하였다. X선 광전자분광법(XPS)과 X선 형광분석법(XRF)을 통해 Na^+, Ca^(2+), Fe^(2+), Fe^(3+)가 교환된 제올라이트의 탈알루미늄을 연구하였다. 이온교환된 제올라이트의 내부조성과 표면에서의 Al/Si 비를 양이온의 pK-h값과 관련지어 연구하였다. 특히 제올라이트 표면에서의 Al/Si 비를 얻거나 알루미늄원자의 2p궤도 전자결합 에너지를 결정하기 위하여 XPS법이 이용되었다. 실험적인 결과로서 내부보다는 표면의 Al/Si 비가 작았으며 XPS를 통해서 Al_(2p) 전자의 전자결합에너지가 표면의 알루미늄 함량감소에 따라 비례적으로 감소함을 알 수 있었다. 이같은 사실은 표면에서의 Al/Si 비의 감소와 골격내 Al-O 결합의 결합력 약화가 직접적으로 서로 연관되어 있기 때문이다. The chemical extraction of Al atoms from X and Y zeolites during ion-exchanged procedures using 1N metal chloride solution was studied to investigate the effect of cation on dealumination. Correlated X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence spectroscopy (XRF) studies have been carried out on the dealumination of Na^+-, Ca^(2+)-, Fe^(2+)- and Fe^(3+)-exchanged zeolites. The Al/Si ratios of bulk and surface on ion-exchanged zeolite were studied as a function of pK_h. Especially, XPS has been used to obtain the Al/Si ratio of zeolite surface and to determine the binding energy(E_b) of Al_(2P) electron. We found that the Al/Si ratio of the surface is less than that of the bulk. The XPS results show that decreasing aluminum content of surface proportionally decrease the binding energy of Al_(2p) electron. It has been also derived that the decrease of surface Al/Si ratio is directly related to the weakening of Al-O bond in framework.
이온주입법에 의한 폴리이미드박막의 표면 개질에 대한 연구
김종택,이덕출 한국전기전자재료학회 1998 전기전자재료학회논문지 Vol.11 No.4
The influence of ion implantation on surface properties of polymers was studied. We investigated microhardness, friction, wear and wettablility of polyimide. Energies of 50, 200keV were used with doses range from $1{\times}10^{13} to 1{\times}10^{16} [ions/cm^2]$. The implanted ion species were B, N and Ar. The microhardness of polyimide was increased after implantation for doses of $1{\times}10^{15}\; [ions/cm^2]$. A reduction of the friction coefficient was in most case correlated with a reduction of wear. The contact angles of water for $B^+,N^+$ implanted polyimide decreased from $76^{\circ}C$ to zero, as the fluencies increased at energies of 50 and 200 KeV. However, the contact angle of Ar ion implanted polyimide did not change under ambient room conditions even if the time elapsed. SEM measurement was performed to characterize the modified surface layer.