http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
광전소자 응용을 위한 Muscovite mica 기판 위에 성장된 갈륨 도핑된 ZnO 박막의 광학적 특성 및 광학 상수
김영규 ( Younggyu Kim ),임재영 ( Jae Young Leem ) 대한금속재료학회(구 대한금속학회) 2016 대한금속·재료학회지 Vol.54 No.2
Ga-doped ZnO (GZO) thin films were grown on muscovite mica substrates by sol-gel spin-coating. The effects of post-annealing on the optical properties and constants of the GZO thin films were investigated. All the films exhibited strong near-band-edge emission in the UV range, while the defect-related deep-level emission in the visible region was only observed at 600 ℃. The average transmittance of the films was about 75% in the visible region and the sharp absorption edges were shifted toward a higher wavelength and became sharper with an increase in the post-annealing temperature. The refractive index was measured for the as-grown and annealed GZO thin film at 500 ℃. The single oscillator energy, dispersion energy, M-1 and M-3 moments, average oscillator strength and wavelength, and the refractive index at an infinite wavelength were obtained from the refractive index values of the films. In addition, the real and imaginary parts of the dielectric constant and optical conductivity of the films were measured.(Received April 7, 2015)
새로운 고조파 차단 부하 회로를 이용한 2.14 ㎓ 대역 고효율 F급 전력 증폭기
김영규(Younggyu Kim),Girdhari Chaudhary,정용채(Yongchae Jeong),임종식(Jongsik Lim),김동수(Dongsu Kim),김준철(Juncheol Kim),박종철(Jongcheol Park) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.9
본 논문에서는 새로운 고조파 차단 부하 회로를 제안하고, 이 회로를 이용한 고효율 F급 전력 증폭기를 설계하였다. 제안된 부하 회로는 F급 전력 증폭기의 효율을 향상에 있어서 큰 기여도를 갖는 2차와 3차 고조파에서 종단 임피던스를 제어한다. 제안된 부하 회로의 2차와 3차 고조파 입력 임피던스는 각각 단락 및 개방 임피던스를 보인다. 제작된 구조의 부하 회로는 F급 전력 증폭기의 고조파를 억압하기에 충분한 24 ㏈ 이상의 감쇠 특성도 보인다. 부하 회로를 이용한 F급 전력 증폭기의 측정 결과는 최대 출력(P1㏈) 35.17 ㏈m에서 드레인 효율 75.7 %, 전력 부가 효율 71.3 %를 보였다. In this paper, we proposed a novel harmonic load circuit to design a high efficiency class-F amplifier. The proposed load circuit controls termination impedances to enhance the efficiency of class-F power amplifier. The termination impedances at the 2nd and the 3rd harmonics are showed short and open condition, respectively. Also, a fabricated load circuit showed an attenuation characteristic more than 29 ㏈, that is enough to eliminate harmonics of the class-F power amplifier. The measured drain and power-added efficiency are 75.7 % and 71.3 % at the point of maximum output power 35.17 ㏈m.
김도현(Dohyun Kim),김청균(Chungkyun Kim),김영규(Younggyu Kim) 한국트라이볼로지학회 2005 한국트라이볼로지학회 학술대회 Vol.2005 No.6
The O-ring seal is a essential component part in various mechanical apparatuses for the sealing. The contact force of O-rings is effected in environments of the O-ring seal, like that applied pressures, working temperatures and materials. Particularly the material of O-rings is a very important factor in severe condition such as high temperatures. But materials are properly selected because of the cost. So Bi-polymer O-rings that can satisfy both the mechanical characteristic and costs are proposed in this study. And the difference of the contact force of Bi-polymer O-rings and conventional O-rings with temperatures is found.
소용량 건물용 연료전지시스템 블로워의 가혹조건 평가에 관한 연구
김강수(Kangsoo Kim),이덕권(Deokkwon Lee),이정운(Jungwoon Lee),김은정(Eunjung Kim),김인찬(Inchan Kim),김영규(Younggyu Kim),신헌용(Hunyong Shin) 한국가스학회 2012 한국가스학회지 Vol.16 No.6
연료전지는 우수한 도시가스 인프라로 안정적인 에너지공급이 가능하고, 연료 다변화가 가능한 신에너지 기술이다. 연료전지 상용화를 위해 시스템의 성능 및 신뢰성뿐만 아니라, 가격의 저감이 필수적이다. 소용량 건물용 연료전지시스템에서 가격비중이 매우 높은 보조기기의 가격저감 연구의 일환으로, 국내 제작된 블로워의 안전 성능을 평가하고 개선방향을 모색하고자 하였다. 본 연구에서는 실제 연료전지시스템의 작동환경과 가장 유사한 환경에서 블로워의 성능 및 가혹조건 평가를 수행하였다. 블로워를 70℃ 온도조건에서 장기 가동 시 유량성능, 기밀성능 및 열적거동의 상관관계를 파악하여, 블로워의 성능 저하에 영향을 미치는 모터열화, 다이어프램 재질 및 토출구 구조 등의 주요인자를 도출하였다. The fuel cell is one of the renewable energy sources. And it is a new source of energy that can be applied to various fuels and continuously supported by the excellent city-gas infrastructure. It is important to improve performances and reliabilities, and reduce the cost of fuel cell systems for commercialization. And, some safety performances of blower domestically produced are evaluated and some improvements are researched to save the cost of fuel cell systems. In this paper, the performance and worst stress condition of blowers are evaluated in operating environment similar to the fuel cell systems. Actually, the correlation of flow, leakage and thermal behavior are evaluated in the worst stress condition at 70℃ and, some major factors of blower degradation such as a motor deterioration, material and structures of the outlet are examined.
김은용(Eunyong Kim),김진경(Jinkyung Kim),이영희,김은정(Eunjung Kim),김영규(Younggyu Kim),문일(Il Moon) 한국에너지학회 2008 한국에너지공학회 학술발표회 Vol.2008 No.-
본 연구에서는 수소 경제의 핵심 인프라 시설인 수소 충전소의 조업자 안전운전을 위한 교육 및 훈련 프로그램을 구축하였으며, 개발된 프로그램은 크게 수소안전교육 모듈, 수소 충전소 가상체험 모듈, 가상 사고 시나리오 모듈로 구성되어 있다. 수소안전교육 모듈에서는 수소 사고의 특징과 안전 물성 등의 자료를 수록함으로써 수소에 안전에 대한 이해를 돕도록 하였으며, 가상체험 모듈에서는 충전소의 구성과 용도를 3D Virtual Reality 기술을 도입해 간접 체험할 수 있도록 하였다. 또한 가상사고 모듈에서는 수소 충전소에서 일어날 수 있는 사고에 대한 동적 모사를 수행하여 사고의 전개 과정 및 결과를 체험해 볼 수 있도록 하였다. 이와 함께 사고가 일어났을 경우 신속하고 정확한 대응을 통해 피해를 최소화하기 위한 ERP(Emergency Response Plan)과 SOP(Standard Operating Procedure)를 개발하였다.