http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김상돈 ( Sang Done Kim ),강용 ( Yong Kang ),임완묵 ( Wan Mook Lim ),조용준 ( Yong Jun Cho ),우광재 ( Kwang Jae Woo ),원창환 ( Chang Whan Won ) 한국공업화학회 1997 공업화학 Vol.8 No.3
유동층 반응기를 사용하여 효율적으로 동을 포함한 전자회사 공장의 폐수로부터 순수 동을 회수하고자 하였다. 폐수에 포함된 동의 초기농도, 반응기 내부에서 액체의 유속, 반응온도, 반응기 내부에서 양극과 음극간의 전류밀도 그리고 반응시간 등을 실험변수로 선택하였으며 이들 실험변수들이 동의 회수율에 미치는 영향등에 대해 검토하였다. 또한, 본 연구의 실험결과를 실제공정에 공업적으로 적용할 수 있도록 연속공정에서 필요한 기초자료를 제공하고자 하였다. 본 연구의 결과 유동층 반응기를 사용하여 동을 포함한 전자공장의 폐수로부터 매우 효과적으로 순도가 높은 동의 분말을 회수할 수 있었다. 본 연구의 실험범위에서 동의 회수율은 폐수에 포함된 동의 농도가 증가할수록 감소하였으며 전류밀도와 반응시간이 증가함에 따라 증가하였으나, 액체의 유속과 반응온도가 변화함에 따라 최대값을 나타내었다. 본 연구의 범위에서 동의 회수율을 85% 정도 이상으로 유지하기 위한 최적 반응조건은 폐수중의 동의 농도는 3wt%, 액체의 유속은 0.5 cm/s, 반응온도는 25℃, 전류밀도는 7A/dm² 그리고 반응시간은 2시간으로 나타났다. 이와 같은 방법에 의한 동의 회수방법은 분말재료의 혼합이나 도금등에도 적용될 수 있을것으로 판단되며, 이 경우 복합분말재료의 균질도를 향상시켜 이를 원료로 하여 생산되는 제품의 상품성을 증가시키는데 응용될 수 있을 것으로 사료된다. 또한, 본 연구의 결과는 전자공장에서 다량 방출되는 금속성 폐수로 부터 금속성분을 회수함으로써 수질 오염을 방지할 수 있는데 이와 같은 공정설계에도 적용할 수 있는 중요한 공학적 정보를 제공할 수 있을 것으로 사료된다. Copper recovery from waste water of electronic industry has been conducted effectively in a fluidized bed reactor. Initial concentration of copper in the waste water, liquid flow rate in the reactor, reaction temperature and time and current density between the cathode and anode in the reactor have been selected as operating variables. The effects of operating variables on the recovery of copper have been studied. It has found that the copper resolved in the waste water can be recovered continuously by means of a fluidized bed reactor. The recovery of copper decreased with an increase in the initial concentration of copper in the waste water, while it increased with increasing reaction time and current density, however, it exhibited its maximum value with the variations of liquid flow rate and reaction temperature. The optimum reaction condition to maintain the copper recovery around 85% is as follows ; Xo=3 wt%, U_L=0.5 cm/s, T=25℃, I=7 A/dm² and t=2hrs within this experimental condition.
김상돈 ( Sang Done Kim ) 한국화학공학회 1979 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.17 No.2
Overall heat transfer coefficient correlations are given for fluidized bed in which vertical tubes are immersed. Correlations available in the literature are surveyed and compared on a consistant basis. Effects of mass flow rate, particle size, solid concentration, solid and fluid thermophysical properties, immersed tube location, bed pressure and packing materials on heat transfer coefficients were summarized. In order to understand the fundamental mechanisms of heat transfer, wall to fluidized bed heat transfer is also reviewed. Those correlations on overall heat transfer coefficients are evaluated and find that the most appropriate one for predicting overall heat transfer coefficients between fluidized bed and vertically immersed tubes is one of Tamarin and Khasanov.