http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오픈소스 CFD 코드 오픈폼(OpenFOAM)을 이용한 가스터빈엔진 노즐-터빈 유동 해석
김병윤(B.Y. Kim),김병휘(B.H. Kim),길재흥(J.H. Gill) 한국전산유체공학회 2012 한국전산유체공학회 학술대회논문집 Vol.2012 No.5
OpenFOAM is widely used open source CFD code. In this study the performance of OpenFOAM to simulate nozzle-turbine flow is evaluated. Single stage nozzle-turbine of radial gas turbine engine is simulated. To simulate nozzle-turbine flow, the capability of compressible flow, MRF, cylic boundary condition and non-matching grid interface are needed. snappyHexMesh of OpenFOAM is used to generate mesh and steady DensityBasedTurbo solver of OpenFOAM-1.6-ext is used for flow compressibility, cyclic난gi boundary condition is used, and overlapGgi method for non-matching grid interface between nozzle and turbine. We compared results of OpenFOAM with commercial CFD code. OpenFOAM shows enough capability for industrial turbine simulation and shows some advantages and disadvantages comparing to commercial CFD code.
박만용,김태연,정의석,유정주,김병휘,김봉태,Park, M.Y.,Kim, T.Y.,Jung, E.S.,Yoo, J.J.,Kim, B.W.,Kim, B.T. 한국전자통신연구원 2006 전자통신동향분석 Vol.21 No.6
WDM-PON은 가입자 별로 파장을 독립적으로 할당하여 전송로를 구성하는 방식으로 전송 프로토콜에 관계없이 전송이 가능하고, 전용선 수준의 대역폭 제공, 전송속도의 제한이 없으며, 서비스 품질을 보장하고, 보안성이 뛰어난 차세대 FTTH 기술로 평가받고 있다. 특히 고성능, 저가인 광소자를 포함한 광모듈의 조기 개발이 FTTH 네트워크 초기 시장 및 서비스를 선점하게 될 것으로 예상된다. 본 논문은 WDM 기반 수동형 광가입자망용 광원, 이러한 광원과 다중화 기술에 따른 WDM-PON, WDM/TDM,WDM/SCM 등 다양한 수동형 광가입자망 구성 기술을 소개한다.
박재동,정의석,김봉규,김태연,유정주,김병휘,김봉태,Park, J.D.,Jung, E.S.,Kim, B.K.,KIm, T.J,Yoo, J.J.,Kim, B.W.,Kim, B.T. 한국전자통신연구원 2004 전자통신동향분석 Vol.19 No.6
WDM-PON은 가입자망의 트래픽 병목 현상을 해결하고, 다양한 서비스 품질을 제공하면서 고속화된 데이터 전송을 위해 가입자 당 독립 파장을 할당함으로써 가입자의 요구 대역에 제한을 받지 않으며, 보안성이 보장되는 차세대 WDM 기반 수동형 광가입자망이다. 특히 고성능, 저가인 광소자를 포함한 광모듈의 조기개발이 FTTH 네트워크 초기 시장 및 서비스를 선점하는 척도가 될 것으로 예상된다. 본 논문은 WDM 기반 수동형 광가입자망 동작 방식, 광다중화기 및 역다중화기, 그리고 WDM -PON과 WDM 다중화 기술인WDM/TDM, WDM/SCM, WDM/CDM을 포함한 다양한 광 수동 가입자망 구성 기술을 소개한다.
유제훈,김병휘,이상수,고재상,Yu, J.H.,Kim, B.W.,Lee, S.S.,Koh, J.S. 한국전자통신연구원 2009 전자통신동향분석 Vol.24 No.1
세계 최초 상용화 개발에 성공한 RSOA 기반 파장재활용 WDM-PON 기술의 원리 및 전송특성에 대해 살펴본다. 본 기술은 파장 당 1.25 Gbps로 한 가닥의 광 섬유로 20Gbps(16파장)/40 Gbps(32파장) 대역폭을 제공하며, 하향 광신호를 상향 광신호로 재활용함으로써 광모듈의 인벤토리 문제가 없고, 경제성도 우수한 기술이다. 본 기술은 2008년 광주 FTTH 인프라 구축에 적용되었고, 해외 시장 진입을 위해 다양한 방안이 추진중이며, 러시아 시장 개척을 위해 대규모 국제공동연구가 2008년 11월부터 추진되고 있다.
파장분할다중방식 광통신망의 모니터링 방식에 관한 기술 동향
이우람,조승현,김봉규,박재동,김병휘,Lee, W.R.,Cho, S.H.,Kim, B.K.,Park, J.D.,Kim, B.H. 한국전자통신연구원 2004 전자통신동향분석 Vol.19 No.5
파장분할 다중방식 광통신망(WDM -PON) 운영의 신뢰성을 높이기 위해 각 광 채널의 파장과 파워, 그리고 광섬유로 이어진 링크(link)의 절단상태 등을 모니터링(monitoring)하는 것은 필수적이다. 본 원고에서는 이러한 목적을 효율적이고 경제적으로 달성하기 위해 제시되고 검증되었던 방법들을 pilot tone을 이용한 방법, AWG, FBG, tunable filter 등의 파장 선택성 소자를 이용한 방법, electrical processing을 이용한 방법 등의 세 가지로 나누어 소개한다.
내연기관 실린더 헤드 조립체 내부의 냉각수 유동 및 열전달에 관한 연구
서용권(Y.K. Suh),허성규(S.G. Heo),김병휘(B.H. Kim) 한국전산유체공학회 2009 한국전산유체공학회지 Vol.14 No.1
In this study we investigated the characteristics of fluid flow and heat transfer within a coolant passage in the cylinder head assembly of an internal combustion engine by using a commercial CFD code, CFX The complex coolant passage of the cylinder head assembly was modelled by suitable choice of a grid system and careful attention was paid in the construction of meshes near the walls where significant cooling occurs. To treat the simultaneous heating and cooling of the combustion walls we invented a methodology allowing a heat source within the solid wall and the convective cooling at the interface between the solid and the fluid. We managed to reproduce the experimental results by adjusting parameters appropriately. We have found that high temperature was concentrated at the surface of the cylinder jacket. It turned out that the effect of oil cooling from the piston head was unexpectedly significant. On the other hand the effect of cooling from the ambient air is almost negligible. The CFD method proposed in this study is believed to be useful in the early stage of the design of the engine-cooling system.