http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김덕재,이리형,박복만 대한건축학회 1977 建築 Vol.21 No.6
본 조사는 대한건축학회의 일부조사비보조로 이루어진 것으로 폭발사고는 금년 11월11일 밤9시15분 전북이리역 구내에서 다이너마이트와 전기뇌관등 약 40t의 고성능 폭발물을 가득 실은 화차가 폭발,고성능 대형폭탄이 터진 곳과 같은 충격과 폭파력으로 이리시 전역을 거의 강타 1,000명이 넘는 사상자를 냈으며 9,500 여채의 가옥이 부서지는 초유의 대참사를 빚었으며 이로 인해 토목,건축물에도 많은 피해를 주었다. 필자들은 폭발후 약 일주일후에 대한건축학회 회장임의 협조로 피해 현장을 조사할 기회를 얻었다. 조사후 아직 얼마되지 않아 자료를 정리할 수 없는 현상이므로 상세한 보고는 후일에 하는것으로 하고 이번에는 이리시내의 각종 건물의 피해의 개략을 소개하고자 한다.
PACVD 방법으로 TiN 코팅시 공정변수가 작은 동공 내부의 코팅층 형성에 미치는 영향
김덕재,조영래,백종문,곽종구,Kim, Deok-Jae,Jo, Yeong-Rae,Baek, Jong-Mun,Gwak, Jong-Gu 한국재료학회 2001 한국재료학회지 Vol.11 No.6
A study on the TiN coating layer in small holes on the Purpose of die-casting dies application has been performed with a PACVD process. For the hole having diameter of 4 mm. the uniform TiN coating layer in the hole to the depth of 20 mm was achieved using DC pulsed power source. To understand the forming mechanism of TiN coating layer, plasma diagnosis on Ti, $N_{2}^{+}$ and A $r^{+}$ emissions was carried out during plasma coaling process by optical emirssion spectroscopy. When the duty ratio was equal or over 50%, the Peaks of Ti,$ N_{2}^{+}$ and A $r^{+}$ emission were obviously observed. While duty ratio was equal or under 28.6%, no peaks for Ti, $N_{2}^{+}$ and A $r^$ were observed and the formation of TiN coating layer was rarely observed. For the coating in 4 mm hole diameter, the coating layer with bipolar process was two times deeper than that with unipolar process. PACVD 방법으로 다이캐스팅용 금형에 적용할 수 있는 TiN 코팅막을 형성시키는 연구를 하였다. 직류 펄스전원을 사용하여 지름이 4 mm인 작은 동공내부에 최고 20 mm 깊이까지 균일한 TiN 코팅층을 형성할 수 있었다. 코팅공정시 발광분광분석기를 사용해 Ti와 $N_{2}$ 및 $Ar^{+}$의 분광선을 측정함으로써 TiN 코팅막의 형성기구에 대하여 고찰하였다. 듀티비율이 50% 이상인 경우는 Ti, $N_{2}^{+}$ 및 $Ar^{+ }$ 의 분광선이 나타났으나, 듀터비율이 28.6%이하인 경우 분광선이 전혀 나타나지 않았으며 TiN 코팅층의 형성도 불안정하였다. 펄스전원으로 Bipolar로 사용한 경우 Unipolar를 사용한 경우보다 지름이 4 mm인 구멍에서 2배 깊게 코팅되었다.
김덕재,박병래,고정민,김기수,김영효,정현섭,신형두,홍정민,김태호,신홍인,박의균,김신윤 생화학분자생물학회 2006 Experimental and molecular medicine Vol.38 No.5
Homocysteine (Hcy) is thought to play an important role in the development of osteoporosis and fracture. Methionine synthase reductainvolved in the conversion of Hcy to methionine. We hypothesized that certain genetic polymorphisms of MTRR leading to reduced enzyme activity may cause hyperhomocysteinemia and affect bone metabo-lism. We therefore examined the associations of the A66G and C524T polymorphisms of the MTRR gene with bone mineral density (BMD) and serum osteocalcin levels in postmenopausal women. Although we did not detect any significant asso-ciations between MTRR polymorphisms and BMD or serum osteocalcin levels, we found that the 66G/524C haplotype, which has reduced enzyme activity, was significantly associated with serum osteocalcin levels in a gene-dose dependent manner (P=0.002). That is, the highest osteocalcin levels (34.5± bearing two copies, intermediate osteocalcin levels (32.6± 14.4 ng/ml) were observed in subjects bearing one copy, and the lowest levels of osteocalcin (28.8± 10.9 ng/ml) were observed in subjects bearing no copies. These results suggest that the 66G/524C haplotype of the MTRR gene affect bone turn over rate.