http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
알루미늄 입자 크기에 따른 파라핀 혼합연료의 연소 특성 연구
고수한(Soohan Ko),한승주(Seongjoo Han),류성훈(Sunghoon Ryu),김진곤(Jinkon Kim),문희장(Heejang Moon),김준형(Junhyung Kim),고승원(Seungwon Ko) 한국추진공학회 2017 한국추진공학회 학술대회논문집 Vol.2017 No.5
본 연구에서는 알루미늄 입자 크기에 따른 파라핀 혼합연료의 연소 특성에 관한 실험을 수행하였다. 평균 입도 100 nm 및 8 μm 크기의 알루미늄 입자와 Sasol사의 마이크로크리스탈린 파라핀 왁스(Sasol 0907)를 이용하여 연소실험을 수행하였고 순수 파라핀과 알루미늄 입자 5 wt%를 첨가한 파라핀 혼합 연료의 후퇴율과 압력선도, 특성배기속도 등을 비교하였다. 마이크로 입자의 첨가는 산화제 유속이 증가할수록 후퇴율을 향상시켰으나 나노 입자의 첨가는 후퇴율이 감소하는 경향을 보였다. In this study, the combustion characteristics of paraffin blended fuel on aluminum particle size were investigated. The combustion experiments were carried out using aluminum particles with an average particle size of 100 nm and 8 μm and microcrystalline paraffin wax (Sasol 0907). A series of comparison was conducted on the regression rate, the pressure curve and the characteristic velocity of pure paraffin and paraffin blended fuels with aluminum particles. It was found that the micro-sized particles enhance the regression rate as the oxidizer mass flux increased. However, the nano-sized particles decrease the regression rate as the oxidizer mass flux is increased.
정혜흔(Hyeheun Jeong),김준형(Junhyung Kim),고승원(Seungwon Ko),류병태(Byungtae Ryu) 한국추진공학회 2016 한국추진공학회 학술대회논문집 Vol.2016 No.12
ZPP(Zirconium-Potassium Perchlorate)는 PMD(Pyrotechnic Mechanical Device)에 사용하는 1차 점화 장약의 일종이다. 용매에 녹아있는 바인더 성분을 석출시켜 부유해 있는 입자들을 유동상태에서 과립형태로 만들어 제조하는데 LabRAM Mixer를 이용하여 기계적 접촉을 하는 블레이드형 장비와 달리 공진현상을 이용하여 에너지를 전달시켜 입자를 제조한다. 본 연구를 통해 LabRAM Mixer의 조건 변화에 따라 제조한 입자의 특성을 평가하고 그 특성을 고찰하였다. ZPP(Zirconium-Potassium Perchlorate) is type of primary charge initiators for PMD(Pyrothchnic Mechanical Device) system. The binder component dissolved in the solvent is precipitated to suspended particles in the granules. The LabRAM Mixer uses resonance to transfer energy, unlike blade equipment that makes mechanical contact. In this study, the properties of the particles prepared of the LabRAM Mixer were evaluated according to the changes of the conditions.
정혜흔(Hyeheun Jeong),김준형(Junhyung Kim),고승원(Seungwon Ko),류병태(Byungtae Ryu) 한국추진공학회 2017 한국추진공학회지 Vol.21 No.4
ZPP (Zirconium-Potassium Perchlorate) is type of primary charge initiators for PMD (Pyrotechnic Mechanical Device) system. The binder component dissolved in the solvent is precipitated to suspended particles in the granules. The LabRAM Mixer uses resonance phenomenon to transfer energy, unlike blade equipment that utilizes mechanical contact. In this study, the properties of the particles prepared by the LabRAM Mixer were evaluated with the changes of the conditions.
김준형(Junhyung Kim),서태석(Taeseok Seo),고승원(Seungwon Ko),류병태(Byungtae Ryu) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.5
착화기의 1차 점화장약으로 널리 사용되어지고 있는 ZPP(Zirconium/Potassium perchlorate)의 열분해 특성을 DSC를 사용하여 평가하였다. ZPP의 열분해반응에 대한 속도론적 파라미터를 결정하기 위하여, 다른 가열 속도를 갖고 수행된 DSC 결과들을 AKTS사의 Thermokinetics software를 사용하여 분석하였다. 결정된 속도론적 파라미터를 사용하여 계산된 모사값들은 실험적 결과들과 잘 일치함으로써, ZPP의 열분해과정에 대한 속도론적 모사의 유효성을 검증할 수 있었다. The thermal decomposition characteristics of the ZPP(Zirconium/Potassium perchlorate), widely used as a primary charge of initiators, were investigated by differential scanning calorimetry(DSC). The DSC results with different heating rates were elaborated with AKTS-Thermokinetics software for the determination of the kinetic parameters of the thermal decomposition of ZPP. There was good agreement between the experimental and the simulation curves, based on the determined kinetic parameters, which indicates the validity of the kinetic description of the thermal decomposition process of ZPP.
김준형(Junhyung Kim),서태석(Taeseok Seo),고승원(Seungwon Ko),류병태(Byungtae Ryu) 한국추진공학회 2015 한국추진공학회지 Vol.19 No.5
The thermal decomposition characteristics of the ZPP(Zirconium/Potassium perchlorate), widely used as a primary charge of initiators, were investigated by differential scanning calorimetry(DSC). The DSC results with different heating rates were elaborated with AKTS-Thermokinetics software for the determination of the kinetic parameters of the thermal decomposition of ZPP. There was good agreement between the experimental and the simulation curves, based on the determined kinetic parameters, which indicates the validity of the kinetic description of the thermal decomposition process of ZPP.