http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초기 설계단계에서의 셋 베이스 다목적 설계 최적화(제4보)
남윤의(Yoon-Eui Nahm),井上全人(Masato Inoue),石川晴雄(Haruo Ishikawa) 한국산업경영시스템학회 2012 한국산업경영시스템학회지 Vol.35 No.1
Various computer-based simulation tools such as 3D-CAD and CAE systems are widely used to design automotive body structure at the early phase of design. Designers must search the optimal solution that satisfies a number of performance requirements by using their tools and a trial-and-error approach. In the previous three reports, a set-based design approach has been proposed for achieving design flexibility and robustness while capturing designer’s preference, and its effectiveness has been illustrated with a simple side-door impact beam design problem and real vehicle side-door structure design. This report presents the development of integrated 3D-CAD and CAE system, and the applicability of our proposal for obtaining the multi-objective satisfactory design solutions by applying to an automotive front-side frame.
하이드록시아파타이트 표면 나노 구조 성장에 의한 고분자 표면의 초소수성 개질
남윤한(Yoon Han Nam),조용상(Yong Sang Cho),서경덕(Kyoung Duck Seo) 대한기계학회 2020 大韓機械學會論文集B Vol.44 No.2
초소수성 표면은 자가 세정, 방빙 등의 특성을 가지며, 산업 여러 방면에 활용될 수 있어 많은 관심을 받고 있다. 그러나 초소수성 표면 구현을 위해 제안된 기존의 방법들은 복잡한 제작 공정 및 고가의 장비가 필요하다는 한계가 있다. 따라서 본 연구에서는 의사체액(SBF: Simulated Body Fluid)을 이용하여 하이드록시아파타이트 마이크로/나노 구조를 고분자 표면 위에 성장시키고 SAM(Self-Assembled Monolayer) 코팅을 함으로써 손쉽게 초소수성 표면을 제작하였다. 제작된 초소수성 표면의 접촉각은 163.3±2.7°로 측정되었다. 더 나아가 마스킹 테이프를 이용하여 초소수성 표면을 다양한 형상으로 선택적으로 패터닝 할 수 있음을 확인하였으며, 제작된 초소수성 표면의 자가 세정 특성을 보임을 검증하였다. Superhydrophobic surfaces have attracted research interest owing to their self-cleaning characteristics, antiicing properties, etc. However, conventional fabrication methods for these surfaces still require complex processes and special facilities. Therefore, in this study, we propose a facile and cost-effective fabrication method for superhydrophobic surfaces using simulated body fluid (SBF). A PMMA (poly (methyl methacrylate)) substrate with a hydroxyl group is initially immersed in the SBF. Hydroxyapatite with micro/nanostructure is then crystallized on the substrate. Finally, a self-assembled monolayer (SAM) coating is prepared to introduce superhydrophobicity. After the coating process, the contact angle of the fabricated substrate is measured as 163.3 ± 2.7°. We also demonstrate that hydroxyapatite with a micro/nanostructure can be patterned with various shapes by using masking tape. In addition, the self-cleaning effect of the fabricated surface is observed.
소맥엽신의 기공운동과 환경조건과의 관계 3 : 토양수분 및 도복이 소맥엽신의 기공개도에 미치는 영향
南潤一,河龍雄,朴武彦 韓國作物學會 1985 Korean journal of crop science Vol.30 No.1
토양수분, 질소시비량 및 도복의 발생 유무가 소맥엽신의 기공개도에 미치는 영향을 알고져 소맥 조광 품종을 공시하여 침윤법으로 개화기에 기공개도의 일중변화를 조사하였던바 그 결과는 다음과 같다. 1. 기공이 폐공되는 시각은 토양수분 Potential이 낮을수록 빨라졌으며 폐공되는 정도도 컸었다. 2. 기공개도는 하위엽이 상위엽에 비하여 작았고 토양수분 Potential 이 낮을수록 기공개도의 감소정도는 더욱 컸다. 3. 도복된 맥체의 기공개도는 정상 맥체에 비하여 작았는데 그 경향은 토양수분 정도 및 측정시각에 관계없이 동일하였다. 4. 질소 보비구는 소비구에 비하여 기공개도가 큰 일중변화를 하였는데 도복구나 건조구에서도 같은 경향이었다. 5. 도복후 일수가 경과함에 따라 기공개도는 크게 감소하였는데 도복후 6 일에는 무도복구에 비하여 50%이하의 개도를 보였으며 그 감소정도는 하위엽이 더욱 컸으며 일중에서는 오후에 현저하였다. This experiment was carried out to study in stomatal behaviour of wheat (Chokwang) upon the different soil water potentials, lodging and two different nitrogen treatment. Stomatal aperture was measured at flowering stage under diurnal course with two hour intervals, Stomatal apertures were differently changed according to soil water potentials and leaf position on the stem, showing the rapid closure of stomata at low soil water potential and the narrow opening at low leaf position of stem. Wider stomatal opening appeared at the plot of optimal nitrogen application than that of low nitrogen. It was greatly decreased in opening of stomata at plants lodged, appearing that plant investigated of six days after lodging showed less than 50% than that normal plants, which indicated peculiar decrease of low leaf position of stem at afternoon of diurnal course.