http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Network Analysis of the Disaster Response Systems in the Waste Resource Recycling Center
( Sudong Kim ),( Jihwan Park ),( Jaehun Shim ),( Sangok Choi ) 한국폐기물자원순환학회(구 한국폐기물학회) 2019 ISSE 초록집 Vol.2019 No.-
Since the waste recycling process generates dust and flammable gas during fragmentation, there is always a risk of fire resulting therefrom, and in fact, fire is also frequently occurring. However, research on disaster management at recycling facilities deals only with the problem of process systems from a technical point of view, but it does not suggest concrete alternatives from the management point of view. Therefore, in this study, we analyze the influence of disaster response network of waste resource recycling center by organizational level like decision makers' level, general managers' level, and practitioners' level based on the concept of cognitive accuracy of network in consideration of administrative aspect. The main results are summarized as follows. The waste resource recycling center network was shown high cognitive accuracy between perceived network and actual network. However, when degree centrality was taken into consideration, the network by organization level was not matched. Whole network of the waste resource recycling center was composed mainly of decision makers. The decision makers' level network was composed mainly of decision makers too, but it was slightly different from the whole network. The general managers' level network was composed of decision makers like the whole network. On the other hand, the practitioners' level network was shown high degree centrality of safety and health manager and appeared different from the aforementioned networks. Through this analysis, we could confirm that factors affecting the influence of the network exist such that the entire network and the positions' level networks are different. We can suggest that this can be improved by deploying members who perform formal tasks at the center of the network so that everyone can agree to it.
Biological applications of microfluidic gradient devices
Kim, Sudong,Kim, Hyung Joon,Jeon, Noo Li Royal Society of Chemistry 2010 Integrative biology Vol.2 No.11
<P>Molecular gradients play an important role in diverse physiological and pathological phenomena such as immune response, wound healing, development and cancer metastasis. In the past 10 years, engineering tools have been increasingly used to develop experimental platforms that capture important aspects of cellular microenvironments to allow quantitative and reproducible characterization of cellular response to gradients. This review discusses the emergence of microfluidics-based gradient generators and their applications in enhancing our understanding of fundamental biological processes such as chemotaxis and morphogenesis. The principles and applications of microfluidic gradient generation in both 2D and 3D cellular microenvironments are discussed with emphasis on approaches to manipulate spatial and temporal distribution of signaling molecules.</P> <P>Graphic Abstract</P><P>This review presents design principles for microfluidic gradient devices and their applications in diverse biological research fields. <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c0ib00055h'> </P>
Structural and Electrical Properties of Nb<sub>3</sub> I<sub>8</sub> Layered Crystal
Kim, Bum Jun,Jeong, Byung Joo,Oh, Seungbae,Chae, Sudong,Choi, Kyung Hwan,Nanda, Sitansu Sekhar,Nasir, Tuqeer,Lee, Sang Hoon,Kim, Kwan-Woo,Lim, Hyung Kyu,Chi, Linlin,Choi, Ik Jun,Hong, Min-Ki,Yi, Dong Wiley (John WileySons) 2019 Physica Status Solidi. Rapid Research Letters Vol.13 No.3
Kim, JeongTae,Jeong, Hae Joon,Moon, Yeabin,Kim, Ki Buem,Son, Hyeon Taech,Jeon, Changwoo,Sim, Jae Won,Moon, Sudong,Park, Jin Man Elsevier 2017 Journal of alloys and compounds Vol.711 No.-
<P><B>Abstract</B></P> <P>The as-cast Mg-9Li alloys with difference Al-Si addition were fabricated using induction casting method under the argon atmosphere and then warm rolling process was performed at 473 K. The Al-Si addition to Mg-9Li alloy leads to the formation of Mg<SUB>2</SUB>Si intermetallic compounds and microstructural evolutions such as increased volume fraction of α-Mg phases and changed morphology of α-Mg primary phase on the as-cast specimens. Moreover, the addition of 0.05 wt.% Ti elements on Mg-9Li-3(Al-Si) alloy raised the further microstructural evolutions, e.g. volume fraction of α-Mg phases, which bring about change in the microstructure after warm rolling process. The effects of this micro alloying influences the formation of fine microstructure after warm rolling process, which is the main factor in determining the mechanical properties. With these microstructural evolutions, tensile strength was increased from 101.71 MPa to 247.41 MPa by the minor alloying and warm rolling process. Moreover, the remarkably enhanced strength of Mg-9Li-3(Al-Si) alloy was the results of the addition of 0.05 wt.% Ti from 247 MPa to 412 MPa. Furthermore, the warm press-forming tests were carried out at 523 K to evaluate the applicability of this novel alloy for commercial products.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The as-rolled microstructure is distinctly alternated by minor alloying of Al, Si, and Ti. </LI> <LI> The Al-Si added Mg-9Li-based alloy indeed shows a highly increased strength and elongation. </LI> <LI> The Ti containing alloy with 0.05 wt.% shows the highest tensile strength of 412 MPa. </LI> <LI> This novel Mg-9Li-based alloy is capable of near-net shaping via simple press forming process. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>
Chae, Sudong,Siddiqa, Akhtar J.,Kim, Bum Jun,Oh, Seungbae,Choi, Kyung Hwan,Kim, Hyo Yeol,Lee, Keun Ho,Yu, Hak Ki,Choi, Jae-Young The Royal Society of Chemistry 2018 Chemical communications Vol.54 No.86
<P>We studied dispersants for exfoliating bulk V2Se9 into one dimensional chain units. V2Se9, with a negative zeta potential of −30.1 mV, was acidic and strongly anchored with the amine head of octadecylamine by charge transfer reaction. The steric hindrance by the octadecyl tail promoted the dispersion of V2Se9 to the nano level.</P>
김수동(Sudong Kim),김영원(Young Won Kim),유정열(Jung Yul Yoo) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.11
In the present study, we designed a microfluidic flatform that generates monodisperse droplets with diameters ranging from hundreds of nanometers to several micrometers. To generate fine droplets, T-junction and flow-focusing geometry are integrated into the microfluidic channel. Relatively large aqueous droplets are generated at the upstream T-junction and transported toward the flow-focusing geometry, where each droplet is broken up into the targeted size by the action of viscous stresses. Because the droplet prior to rupture blocks the straight channel that leads to the flow-focusing geometry, it moves very slowly by the pressure difference applied between the advancing and receding regions of the moving droplet. This configuration enables very low flow rate of inner fluid and higher flow rate ratio between inner and outer fluids at the flow-focusing region. It is shown that the present microfluidic device can generate droplets with diameters about 1 micrometer size and standard deviation less than 3%.
김수동(Sudong Kim),김영원(Young Won Kim),유정열(Jung Yul Yoo) 대한기계학회 2010 大韓機械學會論文集B Vol.34 No.7
본 연구에서는 직경이 수백 ㎚로부터 수 ㎛에 이르는 균일한 크기의 액적을 생성하는 마이크로 플루이딕 플랫폼이 설계되었다. 미세한 액적을 생성하기 위하여 T-정션과 유동집속 장치가 마이크로픞 푸이딕 채널로 통합되었다. 상대적으로 큰 수성 액적들이 상류의 T-정션에서 생성되어 유동집속 장치로 이송되는데, 여기에서 각각의 액적은 압력과 점성응력의 작용에 의하여 목표로 하는 크기로 잘게 쪼개진다. 이러한 구성은 내부 유체의 매우 느린 유량과 유동집속 영역에서 내부 및 외부 유체 사이의 높은 유량비를 가능하게 한다. 본 마이크로플루이딕 장치는 약 1㎛ 크기의 직경을 가지는 액적들을 3%보다 작은 표준 편차로 생성할 수 있음이 제시되었다. In the present study, we designed a microfluidic platform for generating monodisperse droplets with diameters ranging from hundreds of nanometers to several micrometers. To generate fine droplets, T-junction and flow-focusing geometry are integrated into the microfluidic channel. Relatively large aqueous droplets are generated at the upstream T-junction and transported to the flow-focusing geometry, where each droplet is broken into smaller droplets of the desired size by the action of pressure and viscous stress. In this configuration, the flow rate of the inner fluid can be made very low, and the ratio of the inner- and outer-fluid flow rates in the flow-focusing region can be made very high. It has been shown that the present microfluidic device can generate droplets with diameters of approximately 1 ㎛ (standard deviation: <3%).
Depth layer partition을 이용한 2D 동영상의 3D 변환 기법
김수동(Sudong Kim),유지상(Jisang Yoo) 한국방송·미디어공학회 2011 방송공학회논문지 Vol.16 No.1
In this paper, we propose a 3D conversion algorithm of 2D video using depth layer partition method. In the proposed algorithm, we first set frame groups using cut detection algorithm. Each divided frame groups will reduce the possibility of error propagation in the process of motion estimation. Depth image generation is the core technique in 2D/3D conversion algorithm. Therefore, we use two depth map generation algorithms. In the first, segmentation and motion information are used, and in the other, edge directional histogram is used. After applying depth layer partition algorithm which separates objects(foreground) and the background from the original image, the extracted two depth maps are properly merged. Through experiments, we verify that the proposed algorithm generates reliable depth map and good conversion results.
Chae, Sudong,Oh, Seungbae,Siddiqa, Akhtar J.,Choi, Kyung Hwan,Lee, Weon-Gyu,Jang, Woo-Sung,Lee, Joo Song,Kim, Young-Min,Huh, Joonsuk,Kim, Soo Min,Choi, Jae-Young The Royal Society of Chemistry 2018 Chemical communications Vol.54 No.88
<P>Ion-exchange chromatography can be used to effectively replace the lithium ion of LiMo3Se3 with a proton. The enlargement of the Stern layer distance caused by this ion exchange improves the dispersibility of (Mo3Se3<SUP>−</SUP>)∞ chains and also prevents the re-bundling and aggregation of nanowires in aqueous solutions, even at high concentrations (1 mg mL<SUP>−1</SUP>).</P>
김수동(Kim Sudong) 길림성민족사무위원회 2011 중국조선어문 Vol.171 No.-
본 론문은 방향을 나타내는 복합동사, 후항동사 가운데서 상하관계를 나타내는 타동사 “-上げる/~올리다” “-下げる/~내리다”를 중심으로 후항동사의 의미를 분석하였다. 상하관계를 나타내는 후항동사가 물리적방향을 나타내는 경우와 사회적방향을 나타내는 경우에 일본어와 조선어의 대응양상이 다르게 나타나고 이를 후항으로 하는 복합동사에 지향적은유가 반영됨을 알수 있다.