http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Hierarchically nanoporous pyropolymer nanofibers for surface-induced sodium-ion storage
Yoon, Hyeon Ji,Lee, Min Eui,Kim, Na Rae,Yang, Seung Jae,Jin, Hyoung-Joon,Yun, Young Soo Pergamon Press 2017 Electrochimica Acta Vol. No.
<P><B>Abstract</B></P> <P>Surface-driven charge storage materials based on both electrochemical double layer (EDL) formation and pseudocapacitive behavior can deliver high energy and power capabilities with long-lasting cycling performance. On the other hand, the electrochemical performance is strongly dependent on the material properties, requiring sophisticated electrode design with a high active surface area and a large number of redox-active sites. In this study, hierarchically nanoporous pyropolymer nanofibers (HN-PNFs) were fabricated from electrospun polyacrylonitrile nanofibers by simple heating with KOH. The HN-PNFs have a hierarchically nanoporous structure and an exceptionally high specific surface area of 3,950.7m<SUP>2</SUP> g<SUP>−1</SUP> as well as numerous redox-active heteroatoms (C/O and C/N ratio of 10.6 and 16.8, respectively). These unique material properties of HN-PNFs resulted in high reversible Na-ion capacity of ∼292mAhg<SUP>−1</SUP> as well as rapid kinetics and stable cycling performance in the cathodic potential range (1-4.5V vs. Na<SUP>+</SUP>/Na). Furthermore, energy storage devices based on HN-PNFs showed a remarkably high specific energy of ∼258 Wh kg<SUP>−1</SUP> at ∼245Wkg<SUP>−1</SUP> as well as a high specific power of ∼21,500Wkg<SUP>−1</SUP> at ∼78 Wh kg<SUP>−1</SUP>, with long and stable cycling behaviors over 2,000 cycles.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Hierarchically nanoporous pyropolymer nanofibers (HN-PNFs) were fabricated. </LI> <LI> HN-PNFs have a high specific surface area of ∼3,950m<SUP>2</SUP> g<SUP>−1</SUP> and numerous heteroatoms. </LI> <LI> HN-PNFs exhibit high capacities of ∼292mAhg<SUP>−1</SUP> and great rate/cycling performances. </LI> <LI> High energy (258Whkg<SUP>−1</SUP>) and high power (21,500Wkg<SUP>−1</SUP>) are achieved. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>Hierarchically nanoporous pyropolymer nanofibers (HN-PNFs) fabricated from electrospun polyacrylonitrile nanofibers by simple heating with KOH exhibited high electrochemical performance for Na-ion storage.</P> <P>[DISPLAY OMISSION]</P>
노동현,김도형,김나래,박종선,이창헌,김미경,최영식 고신대학교의과대학 2007 고신대학교 의과대학 학술지 Vol.22 No.2
전격성 제1형 당뇨병은 특발성 당뇨병환자에서 임상 경과가 짧고 진단 당시 심각한 대사 합병증을 동반하면서 췌장 효소 수치가 높고 췌도 특이 자가항체가 음성인 새로운 아형으로 알려져 있으며, 일본과 일본 외에서의 유병률에는 차이가 있는 것으로 보인다. 아직 전격성 제1형 당뇨병의 발생 기전은 명확하지 않으며 유전적 감수성이 있는 개체에서 바이러스 감염 등의 환경적인 인자와의 연관성이 가능한 병태생리로 제시되고 있으며 이에 대한 추가적인 연구가 요구된다. 저자들은 케톤산증으로 내원하여 전격성 제1형 당뇨병을 진단받은 증례를 경험하였기에 문헌고찰과 함께 보고 하는 바이다. Some patients with idiopathic type 1 diabetes have a fulminant disorder characterized by the absence of insulitis and of diabetes-related antibodies, a remarkably abrupt onset and high serum pancreatic enzyme concentrations. This is referred to as fulminant type 1 diabetes. A 29-year-old man suffering from abdominal pain, nausea and vomiting consulted to our hospital. Laboratory findings revealed high blood glucose level and the evidence of diabetic ketoacidosis, but the serum HbA1c was normal nevertheless. The low level of plasma C-peptide indicated the loss of endogenous insulin secretion. The patient satisfied the criteria for the diagnosis of fulminant type 1 diabetes. After the patient has been treated with insulin, his symptoms were improved and abnormal laboratory data were normalized. We report this case with a review of the literature
Lee, So Young,Kang, Na Rae,Shin, Dong Won,Lee, Chang Hyun,Lee, Kwan-Soo,Guiver, Michael D.,Li, Nanwen,Lee, Young Moo The Royal Society of Chemistry 2012 ENERGY AND ENVIRONMENTAL SCIENCE Vol.5 No.12
<P>We present a new approach of morphological transformation for effective proton transport within ionomers, even at partially hydrated states. Highly sulfonated poly(phenylene sulfide nitrile) (XESPSN) random network copolymers were synthesized as alternatives to state-of-the-art perfluorinated polymers such as Nafion<SUP>®</SUP>. A combination of thermal annealing and cross-linking, which was conducted at 250 °C by simple trimerisation of ethynyl groups at the chain termini, results in a morphological transformation. The resulting nanophase separation between the hydrophilic and hydrophobic domains forms well-connected hydrophilic nanochannels for dramatically enhanced proton conduction, even at partially hydrated conditions. For instance, the proton conductivity of XESPSN60 was 160% higher than that of Nafion<SUP>®</SUP> 212 at 80 °C and 50% relative humidity. The water uptake and dimensional swelling were also reduced and mechanical properties and oxidative stability were improved after three-dimensional network formation. The fuel cell performance of XESPSN membranes exhibited a significantly higher maximum power density than that of Nafion<SUP>®</SUP> 212 under partially hydrated environments.</P> <P>Graphic Abstract</P><P>Morphologically transformed XESPSN <I>via</I> simple thermal trimerisation of end ethynyl groups shows enhanced proton transport even at partially hydrated states. <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c2ee21992a'> </P>
Na-Rae Lee,윤장원,박진병 한국생물공학회 2011 Biotechnology and Bioprocess Engineering Vol.16 No.1
The effects of cell wall mutation on the oxygenation of linoleic acid (M.W. 280) by recombinant Escherichia coli expressing the CYP102A2 gene encoding self-sufficient P450 monooxygenase of Bacillus subtilis was investigated. After the CYP102A2 gene was heterologously expressed in E. coli W3110 and its isogenic lipopolysaccharide (LPS) structural mutant strains, their whole-cell biotransformation activities were compared. The mutants used in this study had previously been designated as MLK53, MLK1067, and MLK986. These strains carry one or two defined mutations in the secondary acyl fatty acids of the LPS lipid A constituent. The CYP102A2 gene was overexpressed in both wild type E. coli W3110 and its mutant strains, with the specific activity ranging from 1.7to 2.1 U/mg protein. Interestingly, the whole-cell biotransformation activity of those recombinant biocatalysts differed significantly. Indeed, MLK986 possessing the tetraacylated LPS showed a higher oxygenation activity of linoleic acid than those in wild type or other mutant strains having hexa- or penta-acylated LPSs. These results suggest that the biotransformation efficiency of E. coli-based biocatalysts,especially for medium- to large-sized lipophilic organic substrates, can be enhanced via engineering their LPS, which is known to function as a formidable barrier for hydrophobic molecules.
Detection of a Microsporidian, Nosema apis, Via Quantitative Real-time PCR
Na Rae Choi,Chuleui Jung,Dae-Weon Lee 한국응용곤충학회 2013 한국응용곤충학회 학술대회논문집 Vol.2013 No.04
Bombus terrestris has played an important role in the pollination in agricultural fields for the alternatives in colony collapsing in the honeybee. Recently, some pathogens or parasites such as viruses, bacteria, mites have been discovered in B. terristris, which affects its life span and fecundity. In order to detect a microsporidian, Nosema apis. in the field population, we collected honeybees and isolated genomic DNA. PCR primers specific for 16S ribosomal RNA (16S rRNA) were synthesized and applied to gene amplification for cloning and quantitative real-time PCR (qRT-PCR). The amplified gene was cloned and sequenced to confirm the 16S rRNA gene. qRT-PCR analysis showed the detection limit of 16S rRNA of Nosema apis was approximately 0.5 ng/μl genomic DNA. This result suggests that detection via qRT-PCR can be applied for the diagnosis of pathogen infection.
IS-14 : Estimation of Black Plume Opacity during Dim Condition
( Na Rae Lee ),( K Yoo ),( H K Son ),( S Sivakumar ) 한국폐기물자원순환학회(구 한국폐기물학회) 2013 한국폐기물자원순환학회 추계학술발표논문집 Vol.2013 No.-
Method 9 is a reference method established by U.S. Environmental Protection Agency (EPA) to quantify plume opacity by the certified observer. Later, digital Optical Method (DOM) was developed to quantify plume opacity from digital photographs for bright and dim conditions. However, there is a limitation for the use of Method 9 and DOM to quantify the plume opacity especially for dim condition. In this paper, DIM-DOM system was used instead of DOM to quantify plume opacity during dim condition. Opacity readings provided by DIM-DOM were compared with the opacity values obtained with the reference in-stack transmissometer of the smoke generator. The individual opacity error results demonstrated that DIM-DOM met Method 9`s requirements. The individual opacity values ranging from 0 to 100% compare well to the corresponding opacity results from the in-stack transmissometer results meeting USEPA`s Method 9 IOE requirement of ≤15%. These results are encouraging and indicate that DIM-DOM has the potential to quantify plume opacity during dim condition.