청자 파도자기를 활용한 도자기 소지 개발 = Development of Ceramic Body using Waste Celadon

다국어 초록 (Multilingual Abstract)

The yield is increasing as the manufacturing technology of ceramics progresses, however, there are many ceramics of poor quality due to variables upon producing ceramics. Some of those waste ceramics are recycled by sanitary ware or tile manufacturers, but most of them are filled in making environmental problem. Therefore, a research begins to recycle waste ceramic ware as alternative to some imported ceramic ware materials and to reduce environmental pollution. This study, succeeding last study which applied waste white ware as ceramic body material, aimed to solve problems of environment and materials by recycling waste ceradon generated in specially formed areas for ceramic in Gyeonggi-do such as Icheon, Yeoju and Gwangju as the ceramic body material. Consequently, the addition of waste ceramic ware into the ceramic body was judged to have limit up to 30% according to plasticity measurement. As we added shredded waste ceramic ware as much as 30% into basic ceramic body and checked its features, the pore rate and absorption rate were good to be average 4% and 3% respectively. In addition, it showed strength more than 720 kgf/$cm^2$ which is higher than existing ceradon body on the market with good sinter state; so it is judged to be available or developed as new ceramic body.

참고문헌 (Reference)

1 이제일, "백자 파도자기를 활용한 도자기 소지 개발" 한국세라믹학회 43 (43): 626-634, 2006

2 F. Andreola, "Utilisation of Municipal Incinerator Grate Slag for Manufacturing Porcelainized Stoneware Tiles Manufacturing" 22 (22): 1457-1462, 2002

3 R. R. Menezes, "Use of Granite Sawing Wastes in the Production of Ceramic Bricks and Tiles" 25 (25): 1149-1158, 2005

4 A. P. Luz, "Use of Glass Waste as a Raw Material in Porcelain Stoneware Tile Mixtures" 33 : 761-765, 2007

5 B. S. Han, "Test and Characterization of Porcelain Body" 47-58, 2001

6 E. S. Lee, "Studies on the Mechanical Properties of Porcelain Bodies" 11 (11): 69-79, 1974

7 I. Agote, "Rheological Study of Waste Porcelain Feedstocks for Injection-Molding" 21 (21): 2848-2853, 2001

8 A. W. Norris, "Range Curve: An Experimental Method for the Study of Vitreous Pottery Bodies" 78 : 102-108, 1992

9 W. M. Carty, "Porcelain-Raw Materials, Processing, Phase Evolution and Mechanical Behavior" 81 (81): 3-20, 1998

10 R. R. Menezes, "Optimization of Wastes Content in Ceramic Tiles Using Statistical Design of Mixture Experiments" 28 : 3027-3039, 2008

11 F. A. Costa Oliveira, "Novel Mullite-based Ceramics Manufactured from Inorganic Wastes I. Densification Behaviour" 196 : 101-108, 2008

12 H. Schneider, "Mullite and Mullite Ceramics" John Wiley & Sons 148-167, 1994

13 I. S. Kim, "Influence of Mullite-seed on the Mullite Synthesis from Various Compositions" 10 (10): 48-54, 2000

14 H. J. Lim, "Effect of Processing Parameters on the Densification - Behaviors by Low Shrinkage in Clay Materials" 33 (33): 725-734, 1996

15 Y. G. Jung, "Effect of Firing Temperature on Mechanical Property and Contact Damage in Pottery" 35 (35): 1343-1350, 1998

16 Y. Kobayashi, "Effect of Firing Temperature on Bending Strength of Porcelain for Tableware" 75 (75): 1801-1806, 1992

17 S. W. Lee, "Control of Permanent Shrinking of Recycled Castable Refractories from Waste Refractories of Al2O3-SiO" 29 (29): 15-22, 1992

18 J. O. Hong, "Characteristics of Sintered Bodies Made from the System of Paper Sludge Ash-Fly Ash-Clay" 38 (38): 908-913, 2001

19 J. H. Lee, "A Study on the Effect of Residual Stress between Body and Glaze of Pottery on the Mechanical Strength" 9 (9): 181-186, 1999

20 R. C. Bradt, "A High-Tech Approach to a Traditional Ceramic-The Toughness of Porcelain" 15-22, 1986