외부 유입 가스 조절을 통한 연료전지 구동 성능 안정화 = An Experimental Guide to Predictable Fuel Cell Operations by Controlling External Gas Supply

국문 초록 (Abstract)

연료전지는 높은 연료유연성을 갖고 있어, 탄소 및 탄화수소 등을 통해서도 전기를 생산할 수 있다. 하지만 이러한 연료원을 사용한 경우, 불안정한 장기 구동성능이 종종 관측된다. 본 연구에서는 반응기 내부에 존재하는 탄화수소가 장기 구동성능을 불안정하게 함을 밝힌다. 본 연구진은 비활성기체인 아르곤을 이용하여 산화극 반응기 내부의 가스화 경로를 예측하고, 이를 통해 탄화수소의 영향을 억제하여 불안정한 장기 구동성능을 극복한다. 더 나아가, 산화극 반응기 내부에 이산화탄소를 공급하여 역부드아반응을 유도한다. 역부드아반응을 통해 탄소연료전지에서 연료로 사용될 수 있는 일산화탄소를 만들어낸다. 과도한 이산화탄소의 주입은 오히려 연료손실 등의 문제를 야기함을 확인한다. 따라서, 본 연구에서는 이산화탄소 공급량의 최적화가 중요함을 밝히고, 이를 통해 연료전지 구동 성능을 안정화한다.

다국어 초록 (Multilingual Abstract)

Fuel cell is one of the promising electrochemical technologies enabling power production with various fuel sources such as hydrogen, hydrocarbon and even solid carbon. However, its long-term performance is often unstable and unpredictable. In this work, we observed that gasification-driven hydrocarbons were the culprit of unpredictability. Therefore, we controlled the presence of hydrocarbons with the help of external gas supply, i.e. argon and carbon dioxide, and suggested the optimal amount of carbon dioxide required for predictable fuel cell operations. Our optimization strategy was based upon the following observations; carbon dioxide can work as both an inert gas and a fuel precursor, depending on its amount present in the reactor. When deficient, the carbon dioxide cannot fully promote the reverse Boudouard reaction that produces carbon monoxide fuel. When overly present, the carbon dioxide works as an inert gas that causes fuel loss. In addition, the excessive carbon monoxide may result in coking on the catalyst surface, leading to the decrease in the power performance.

참고문헌 (Reference)

1 W. A. Kneller, "Physicochemical characterization of coal and coal reactivity: A review" 108 : 357-388, 1986

2 H. Jang, "Origin of peculiar electrochemical phenomena in direct carbon fuel cells" 327 : 1163-1175, 2017

3 R. E. Mitchell, "On the burning behavior of pulverized coal chars" 151 : 426-436, 2007

4 K. M. Ong, "Modeling of indirect carbon fuel cell systems with steam and dry gasification" 313 : 51-64, 2016

5 H. Jang, "Meticulous insight on the state of fuel in a solid oxide carbon fuel cell" 308 : 974-979, 2017

6 T. M. Gur, "Mechanistic modes for solid carbon conversion in high temperature fuel cells" 157 : B751-B759, 2010

7 S. Eom, "Influence of devolatilized gases composition from raw coal fuel in the lab scale DCFC (direct carbon fuel cell) system" 74 : 734-740, 2014

8 N. M. Laurendeau, "Heterogeneous kinetics of coal char gasification and combustion" 4 : 221-270, 1978

9 W. H. A. Peelen, "Electrochemical oxidation of carbon in a 62/38 mol% Li/K carbonate melt" 30 : 1389-1395, 2000

10 A. C. Chien, "Effect of contact mode and flow rate on direct carbon solid oxide fuel cell" 49 : 362-365, 2016

11 Y. Tang, "Effect of anode and Boudouard reaction catalysts on the performance of direct carbon solid oxide fuel cells" 35 : 11188-11193, 2010

12 H. Jang, "Direct power generation from waste coffee grounds in a biomass fuel cell" 296 : 433-439, 2015

13 T. M. Gur, "Critical review of carbon conversion in "carbon fuel cells"" 113 : 6179-6206, 2013

14 P. A. Campbell, "Characterization of coal char and biomass char reactivities to oxygen" 29 : 519-526, 2002

15 J.-H. Koh, "Carbon deposition and cell performance of Ni-YSZ anode support SOFC with methane fuel" 149 : 157-166, 2002

16 T. Wall, "An overview on oxyfuel coal combustion-State of the art research and technology development" 87 : 1003-1016, 2009