판형열교환기의 증발과정에서 오일에 위한 영향을 알아보기 위해 마이크로 기어 펌프를 이용한 냉매-R134a 순환 성능실험 장치를 구성하여, 증발열전달 실험을 수행하였다. POE 오일을 펌프를...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A99915201
2014
Korean
KCI등재,SCOPUS,ESCI
학술저널
255-262(8쪽)
0
0
상세조회0
다운로드국문 초록 (Abstract)
판형열교환기의 증발과정에서 오일에 위한 영향을 알아보기 위해 마이크로 기어 펌프를 이용한 냉매-R134a 순환 성능실험 장치를 구성하여, 증발열전달 실험을 수행하였다. POE 오일을 펌프를...
판형열교환기의 증발과정에서 오일에 위한 영향을 알아보기 위해 마이크로 기어 펌프를 이용한 냉매-R134a 순환 성능실험 장치를 구성하여, 증발열전달 실험을 수행하였다. POE 오일을 펌프를 이용하여 냉매 질량 유량에 비례하도록 0∼5%를 첨가하여, 오일순환량에 따른 열전달계수 변화를 측정하였다. 오일순환율이 증가할수록 R134a 증발 열전달계수는 감소하며, 압력손실은 증가한다. 질량유량 80 g/s, 증발 온도 30℃ 일 때, 오일 순환율 2%조건에서 무오일 대비 약 10%의 열전달계수가 감소하였고, 압력손실은 약 10% 증가하였다.
다국어 초록 (Multilingual Abstract)
To investigate the effect of oil on evaporation heat transfer of plate heat exchanger, evaporation heat transfer experiment was carried out using experimental apparatus for micro gear pumped R134a-oil circulation. By varying oil circulation rate of PO...
To investigate the effect of oil on evaporation heat transfer of plate heat exchanger, evaporation heat transfer experiment was carried out using experimental apparatus for micro gear pumped R134a-oil circulation. By varying oil circulation rate of POE oil from 0 to 5%, evaporation heat transfer performance of plate heat exchanger was investigated. As OCR(Oil Circulation Ratio) increases, the evaporation heat transfer coefficient of R134a decreases and pressure drop increases. When the evaporating temperature is 30℃ and the refrigerant mass flow rate is 80 g/s, evaporation heat transfer rate decreases by 10 % and pressure drop increases by 10% at 2% of OCR condition.
목차 (Table of Contents)
참고문헌 (Reference)
1 이진관, "이산화탄소용 가스냉각기의 PAG 오일 영향에 따른 성능변화" 고려대학교 대학원 2011
2 Hsieh, Y. Y, "Saturated Flow Boiling Heat Transfer and Pressure Drop of Refrigerant R-410A in a Vertical Plate Heat Exchanger" 45 : 1033-1044, 2002
3 Briggs, D. E, "Modified Wilson Plot Techniques for Obtaining Heat Transfer Correlations for Shell and Tube Heat Exchangers" 65 (65): 35-45, 1969
4 Wei, W, "Influence of Lubricant oil on Heat Transfer Performance of Refrigerant Flow Boiling Inside Small Diameter Tubes. Part Ⅰ: Experimental Study" 32 : 67-76, 2007
5 Edwards. M. F, "Heat Transfer and Pressure Drop Characteristics of a Plate Heat Exchanger Using Newtonian and Non-Newtonian Liquids" 259 (259): 286-288, 1974
6 Hu, H, "Heat Transfer Characteristics of R410A-Oil Mixture Flow Boiling Inside a 7 mm Straight Micro Fin Tube" 31 : 1081-1093, 2008
7 Cremaschi, L, "Experimental Investigation of Oil Retention in Air Conditioning Systems" 28 : 1018-1028, 2005
8 Cho, K, "Evaporation Heat Transfer for R-22 and R-407C Refrigerant-Oil Mixture in a Microfin Tube with a U-Bend" 23 : 219-231, 2000
9 ASHRAE, "ASHRAE Handbook-Refrigeration" American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc 7.1-7.6, 2002
1 이진관, "이산화탄소용 가스냉각기의 PAG 오일 영향에 따른 성능변화" 고려대학교 대학원 2011
2 Hsieh, Y. Y, "Saturated Flow Boiling Heat Transfer and Pressure Drop of Refrigerant R-410A in a Vertical Plate Heat Exchanger" 45 : 1033-1044, 2002
3 Briggs, D. E, "Modified Wilson Plot Techniques for Obtaining Heat Transfer Correlations for Shell and Tube Heat Exchangers" 65 (65): 35-45, 1969
4 Wei, W, "Influence of Lubricant oil on Heat Transfer Performance of Refrigerant Flow Boiling Inside Small Diameter Tubes. Part Ⅰ: Experimental Study" 32 : 67-76, 2007
5 Edwards. M. F, "Heat Transfer and Pressure Drop Characteristics of a Plate Heat Exchanger Using Newtonian and Non-Newtonian Liquids" 259 (259): 286-288, 1974
6 Hu, H, "Heat Transfer Characteristics of R410A-Oil Mixture Flow Boiling Inside a 7 mm Straight Micro Fin Tube" 31 : 1081-1093, 2008
7 Cremaschi, L, "Experimental Investigation of Oil Retention in Air Conditioning Systems" 28 : 1018-1028, 2005
8 Cho, K, "Evaporation Heat Transfer for R-22 and R-407C Refrigerant-Oil Mixture in a Microfin Tube with a U-Bend" 23 : 219-231, 2000
9 ASHRAE, "ASHRAE Handbook-Refrigeration" American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc 7.1-7.6, 2002
원자로 내부 구조물 형상 처리 방법이 축소 APR+ 유동분포 예측 정확도에 미치는 영향에 관한 수치적 연구
개선 와법을 이용한 Weis-Fogh형 수차의 유체역학적 특성계산
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2023 | 평가예정 | 해외DB학술지평가 신청대상 (해외등재 학술지 평가) | |
2020-01-01 | 평가 | 등재학술지 유지 (해외등재 학술지 평가) | |
2010-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2008-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2006-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2004-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2001-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
1998-07-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.23 | 0.23 | 0.25 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.22 | 0.19 | 0.552 | 0.03 |