부력 제어식 가두리 모형의 부침 특성 및 안정성 해석 = Analysis of submerging characteristics and stability of the model submersible fish cage operated by buoyancy control

다국어 초록 (Multilingual Abstract)

This study aims to analyze the performance of a submersible fish cage which was designed for developing an economical cage system can be applied in korean aquaculture environment easily. To analyze the performance of the designed cage a model test was carried out. In the test, inclination changes of the upper frame and mooring tensions of model cage were measured during the submerging and surfacing motion in still water and wave condition (period: 2s, wave height: 0.1, 0.2, 0.3m). As a result, in the still water condition the model cage kept horizontal balance and inclination degree of the upper frame was about 1。. In the wave condition, the model cage showed bilateral symmetric up-and-down motion but the average inclination degree of the upper frame was about 0 。. When the model cage reached at a depth of 1m, the upand- down motion of the cage was decreased by 12% compared with that of at the surface (period 2s, height 0.3m). In the same wave condition, the maximum and average line tension under the bottom position were about 8% and 11% respectively compared with that of at surface.

참고문헌 (Reference)

1 김태호, "압축공기를 이용한 부침식 가두리 시설의 부침 특성에 대한 수치해석" 한국어업기술학회 43 (43): 38-48, 2007

2 Fredriksson, D. W., "The design and analysis of a four-cage grid mooring for open ocean aquaculture" 32 (32): 77-94, 2004

3 Kim, J.O., "Studies on the compressed air submersible fish cage system－I" 32 (32): 117-124, 1996

4 Fredriksson, D.W., "Open ocean aquaculture engineering: system design and physical modeling" 34 (34): 41-52, 2000

5 Zhao, Y. P., "Numerical simulation of a submerged gravity cage with the frame anchor system in irregular waves" 22 (22): 416-420, 2010

6 김태호, "Mooring loads analysis of submersible aquaculture cage system using finite element method" 한국어업기술학회 42 (42): 44-53, 2006

7 DeCew, J., "Modeling of dynamic behavior of a single-point moored submersible fish cage under currents" 43 (43): 38-45, 2010

8 Fredriksson, D. W., "Fish cage and mooring system dynamics using physical and numerical models with field measurements" 27 (27): 117-146, 2003

9 Jensen, O., "Finite element analysis of tensegrity structures in offshore aquaculture installations" 36 (36): 272-284, 2007

10 Huang, C. C., "Effects of waves and currents on gravity-type cages in the open sea" 38 (38): 105-116, 2008

11 Fredriksson, D. W., "Development of structural modelingtechniques for evaluating HDPE plastic net pensused in marine aquaculture" 34 (34): 2124-2137, 2007

12 Huguenin, J.E., "A review of the technology and economics of marine fish cage systems" 15 (15): 151-170, 1978