http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
김선원,김경원,유원영,임재혁,김성훈 한국항공우주학회 2013 한국항공우주학회 학술발표회 논문집 Vol.2013 No.11
인공위성이 한 궤도상에서 다수 지점의 관측을 위해서는 빠른 기동을 통하여 탑재체가 목표지점을 지향하고 임무수행 이전에 자세가 안정화되어야 한다. 이를 위하여 위성의 각종 구조물들은 가볍고 충분한 강성을 가지도록 설계되어 자세제어계가 고기동으로 위성을 안정적으로 제어하는 것이 용이하도록 하여야 한다. 태양전지판은 전력생산을 위해 위성의 외부에 장착됨으로서 일반적으로 큰 관성모멘트를 가지게 되어 위성의 자세제어에 큰 영향을 미치게 된다. 본 논문은 지구 저궤도 관측위성의 경량 고강성의 태양전지판 구조설계 및 해석결과를 기술한다. To observe several targets during a orbit, a satellite attitude should be stabilized after fast slewing and before imaging. In this reason, satellite structures should be lightweight and have enough stiffness for attitude and orbit control subsystem to stabilize satellite easily. Solar array panel generating electrical power has a relatively large moment of inertia due to external mounting on satellite bus. Therefore, solar array panel seriously affects attitude control. This paper shows the results of structure design and analysis about a lightweight and a stiff solar array panel for LEO earth observation satellite.
김선원,임재혁,김성훈,황도순,진익민 한국항공우주연구원 2012 항공우주산업기술동향 Vol.10 No.1
본 논문은 세계 인공위성 제작 분야의 시장 동향에 대하여 업체를 중심으로 분석한 결과를 기술한다. 현재 상업위성과 정부수요 위성 제작 분야로 구분되는 위성제작 시장은 연간 100억 달러의 시장규모를 형성하고 있다. 상업위성의 대부분에 해당하는 정지궤도 통신위성은 미국과 유럽의 대형업체에서 이미 선점하고 있고 러시아와 아시아의 일부 국가에서 시장 진입을 시도하고 있는 상황이다. 정부수요 위성 제작 시장은 상대적으로 상업위성 시장보다 진입 장벽이 낮은 분야로써 상대적으로 다양한 업체에서 참여하고 있다. 현재까지 국내 위성개발은 국내 수요에 집중하여 개발되었다. 항후에는 다양한 실용급 위성 개발을 통하여 축적된 기술력을 바탕으로 위성산업 활성화 및 이윤 창출을 위하여 해외로의 위성수출을 진행하는 것이 필요하다. This paper shows the recent trends in satellite manufacturing industry focused on manufacturers. Now, annual market of satellite manufacturing made up commercial and governmental satellite is about 10billion dollar. The market of commercial satellite, mostly GEO communication satellite is occupied by the six main companies in USA and Europe. Recently, new companies from Russia and Asia had entered into the commercial market places. Due to relatively low barrier in order to join the market, various companies had entered into the government satellite market. So far our national satellite development is been concentrated on domestic demand. From now, to invigorate satellite industry and to create profits, it is necessary to head the exportation of the satellite based on technology accumulated by developing several practical satellites
미소진동 영향성 예측을 위한 인공위성 유한요소모델 보정
임재혁(Jae Hyuk Lim),은희광(Hee-Kwang Eun),김대관(Dae-Kwan Kim),김홍배(Hong-Bae Kim),김성훈(Sung-Hoon Kim) 한국항공우주학회 2014 韓國航空宇宙學會誌 Vol.42 No.8
본 논문에서는 미소진동 영향성 예측을 위한 인공위성 유한요소모델 보정에 관해 기술한다. 최근 지구 저궤도에 발사되는 상업용 지구관측위성의 경우, 수요자의 요구로 인해 주어진 시간 안에 다양한 지역의 많은 영상을 공급해야 한다. 이를 구현하기 위해 고용량 휠, 다축 김발을 탑재한 안테나 등 다양한 구동기를 사용한다. 그러나 이러한 구동기는 작동 시 미소진동을 유발할 수 있으며, 이러한 미소진동은 매우 작기는 하지만 지구관측 탑재체를 가진하여 영상품질을 저감시킬 수 있다. 이러한 미소진동에 의한 영향성을 살펴보기 위해서 유한요소모델과 미소진동원 시험결과를 결합한 연성해석을 실시하며, 해석에 앞서 유한요소모델 보정을 실시한다. 보정 전후의 주파수 차이, 모드형상 상관관계, 주파수응답함수 상관관계를 비교하여 개선된 유한요소모델의 품질을 평가하였다. In this work, satellite FE (finite element) model updating for the prediction of the effect of micro-vibration is described. In the case of satellites launched in low earth orbit, high agility and more mission accomplishments are required by the customer in order to procure many images from satellites. To achieve the goal, many mechanisms, including high capacity wheels and antennas with multi-axis gimbals have been widely adopted, but they become a source of micro-vibration which could significantly deteriorate the quality of images. To investigate the effect due to the micro-vibration in orbit on the ground, a prediction is conducted through an integrated model coupling the measured jitter sources with FE (finite element) model. Before prediction, the FE model is updated to match simulation results with the modal survey test. Subsequently, the quality of FE model is evaluated in terms of frequency deviation error, the resemblance of mode shapes and FRFs (frequency response functions) between test and analysis.