http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이광훈,지승현,김수현,윤영수,김수호,Lee, Kwang-Hoon,Jee, Seung-Hyun,Kim, Soo-Hyun,Yoon, Young-Soo,Kim, Soo-Ho 한국광학회 2010 한국광학회지 Vol.21 No.2
백라이트유닛을 더 얇고 밝게 제안하기 위하여 우리는 새로운 타입의 백라이트유닛을 시뮬레이션하였다. 도광판 상면에 미세 볼록렌즈어레이를 형성시킨다. 또한, LGP와의 매칭을 위하여 우리는 기능성 광학 시트를 시뮬레이션하였다. 일반적으로 전통적인 백라이트유닛들은 하나의 LGP와 네 개의 광학시트를 사용해왔으나 우리는 하나의 광학시트를 사용한 백라이트유닛을 시뮬레이션하였다. 설계 결과 우리의 백라이트유닛은 동일한 발광성을 달성하면서 시야각은 30% 더 좋아진 것을 밝혀내었다. In order to obtain thinner and brighter backlight units (BLU), we simulated a new-type backlight unit. A micro-lens array sheet was formed on the upper plane of the light guide plate (LGP) comprising the backlight unit. Also, in order to match with the LGP, we simulated a functional optical sheet. The conventional BLU uses one LGP and four optical sheets, but we simulated a BLU that uses one optical sheet. Simulation results have revealed that our BLU can achieve the same luminance and 30% better view angle as compared with conventional ones.
Micro Fresnel Lens Array를 이용한 Backlight Unit 설계
유재성,정만호,Ryu, Jae-Sun,Jeong, Man-Ho 한국광학회 2005 한국광학회지 Vol.16 No.3
LCD Backlight에서 Micro Fresnel Lens Array (MFLA)가 결합된 도광판을 설계${\cdot}$분석하였다. MFLA가 적용된 도광판과 기존의 프리즘 형태의 도광판의 광학적 특성을 전산모의하여 비교한 결과를 나타내었다. MFLA를 이용한 도광판을 사용할 경우 기존의 LCD backlight 장치에서 필요로 했던 프리즘 필름을 대체할 수 있음을 보였다. A light-guide plate of an LCD backlight coupled with a microfresnel lens array (MFLA) is designed and analyzed. Computer simulated results of optical characteristics of our MFLA-type light-guided plate compared with the conventional prism-type one are presented. We show that the MFLA-type light-guide plate can replace well the conventional prism-type plate.
배열형 소형 프레넬 렌즈가 결합된 LCD 백라이트의 설계
정만호,Jeong, Man-Ho 한국조명전기설비학회 2006 조명·전기설비학회논문지 Vol.20 No.2
LCD 백라이트의 효율을 향상시키기 위하여 배열형 소형 프레넬 렌즈(micro Fresnel lens array)가 결합된 도광판을 설계하였다. 배열형 소형 프레넬 렌즈(MFLA)는 blazed 형태 및 다단계 이진 형태를 채택하였다. MFLA는 기존 LCD 백라이트 장치에서 필요로 했던 프리즘판 및 확산판을 대체할 수 있다. MFLS가 적용된 도광판의 성능을 나타내기 위하여 휘도와 균일도 값 등을 계산하였다. A light guided plate coupled with the micro Fresnel lens array(MFTA) is designed to improve the efficiency of the LCD backlight unit. Blazed Frenel lens and binary multi-level Fresnel lens are adapted for the MFLA. This type of MFLA can replace the prism sheet and diffuser sheet which are used for the conventional type of the LCD backlight unit. The luminance and uniformity are calculated to verify the performance of the MFLA type LCD backlight unit.
Study on the Luminance Properties of Optical Films for Flat-lamp Backlight Applications
Mi-Yeon Yu,Ji-Hee Park,고재현 한국광학회 2008 Current Optics and Photonics Vol.12 No.3
The luminance properties of FFL(Flat Fluorescent Lamp) backlights have been investigated in detail for the first time. The on-axis luminance gain as well as viewing-angle characteristics on various combinations of optical films were obtained from FFL backlight and compared to the results of conventional CCFL(cold-cathode fluorescent lamps) backlights. It was found that the on-axis luminance gains achieved by using optical films in the FFL backlight were lower than those in the CCFL backlight indicating that the recycling processes occurring between optical films and light sources/reflection sheet are not so effective in the FFL backlight due to the much larger area of, and thus higher absorption probability of the FFL. This result suggests that new optical films should be developed for FFL backlight and other flat-lamp backlight technologies.
PC 및 PMMA 수지를 이용한 LED 백라이트용 확산판의 제조 및 특성 연구
김남이,김성우,김효진,김동원,조재현 한국반도체디스플레이기술학회 2012 반도체디스플레이기술학회지 Vol.11 No.1
The optical diffuser for direct-lit LED backlight unit was prepared by using extrusion compounding followed by thermoforming process. Poly(methyl methacrylate) (PMMA) with superior optical characteristics and polycarbonate (PC) with good thermal property were used as base resins, and crosslinked polystyrene (PS) and PMMA beads as diffusing agents were incorporated into resin matrix to derive light scattering and diffusing action. In the compounded plate, the diffusing beads were observed to be dispersed uniformly and distinctly in the continuous phase. The inclusion of polymeric beads up to 3 wt% substantially enhanced the optical characteristics such as luminance, luminance uniformity, haze for the diffuser. Two different diffusers of PC and PMMA-based compound with various compositions were compared in terms of measured optical, thermal, and mechanical properties, which would be expected to be utilized for the industrial application of LED backlight unit.
Park, YoungJun,Kim, Hongjin,Chun, Joo-Young,Lee, JooYoung,Pu, YoungGun,Lee, Kang-Yoon The Korean Institute of Power Electronics 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.4
This paper presents a wide frequency range LLC resonant controller IC for LED backlight units. In this paper a new phase-domain resonance deviation prevention circuit (RDPC), which covers a wide frequency and input voltage range, is proposed. In addition, a wide range gate clock generator and an automatic dead time generator are proposed. The chip is fabricated using 0.35 μm BCD technology. The die size is 2 x 2 mm2. The frequency of the clock generator ranges from 38 kHz to 400 kHz, and the dead time ranges from 300 ns to 2 μs. The current consumption of the LLC resonant controller IC is 4 mA for a 100 kHz operation frequency using a supply voltage of 15 V.
YoungJun Park,Hongjin Kim,Joo-Young Chun,JooYoung Lee,YoungGun Pu,Kang-Yoon Lee 전력전자학회 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.4
This paper presents a wide frequency range LLC resonant controller IC for LED backlight units. In this paper a new phase-domain resonance deviation prevention circuit (RDPC), which covers a wide frequency and input voltage range, is proposed. In addition, a wide range gate clock generator and an automatic dead time generator are proposed. The chip is fabricated using 0.35 μm BCD technology. The die size is 2 x 2 mm2. The frequency of the clock generator ranges from 38 kHz to 400 kHz, and the dead time ranges from 300 ns to 2 μs. The current consumption of the LLC resonant controller IC is 4 mA for a 100 kHz operation frequency using a supply voltage of 15 V.
미세 광학패턴기술을 이용한 Flexible Backlight에 관한 연구
한정민,서대식 통신위성ㆍ우주산업연구회 2014 한국위성정보통신학회논문지 Vol.9 No.1
최근 휴대용 정보전자기기의 비약적인 사용의 증가는 충격에 보다 강한 디스플레이에 대한 연구를 발전시키는 계기가 되었다. 일부제 조회사에서 AMOLED를 사용한 디스플레이에서 유연한 특성을 가진 제품을 선보이고 있으나, 그 사용량에 있어서 압도적으로많은 부 분을 차지하고 있는 것은 LCD 이다. 특히 LCD는 구조적인 문제로 인하여 반드시 후면광원을 사용하여야 하는데, 면발광형식의 조광 장치를 얇은 두께로 구현하는데 사용되는 것이 아크릴 재질의 도광판이다. 본 연구에서는 유연하지 않은 메틸메타아크릴레이트에 부 틸 아크릴레이트 고무계열의 합성재료를 첨가하여 유연성을 유지하고, 투과율을 90%까지 상승시킨 KURARITY 라는재질을 사용한 패 턴의 설계 및 성형 결과를 통해서 유연한 후면광원의 가능성을 평가하는데 주력하였다. 평가 결과 기존의 광원과동일한 수준의 밝기 및 휘도 균일도를 얻을 수 있었다.
박영준,김홍진,전주영,이주영,부영건,이강윤 전력전자학회 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.4
This paper presents a wide frequency range LLC resonant controller IC for LED backlight units. In this paper a new phase-domain resonance deviation prevention circuit (RDPC), which covers a wide frequency and input voltage range, is proposed. In addition, a wide range gate clock generator and an automatic dead time generator are proposed. The chip is fabricated using 0.35 μm BCD technology. The die size is 2 x 2 mm2. The frequency of the clock generator ranges from 38 kHz to 400 kHz, and the dead time ranges from 300 ns to 2 μs. The current consumption of the LLC resonant controller IC is 4 mA for a 100 kHz operation frequency using a supply voltage of 15 V.
고휘도 BLU 구현을 위한 도광판 패턴 설계 및 특성 평가
배창환(Chang-Hwan Bae),허경찬(Kyung Chan Heo),전철규(Chul Gyu Jhun),류봉조(Bong Jo Rvu),구경완(Kyung Wan Koo) 대한전기학회 2015 전기학회논문지 Vol.64 No.2
To improve the optical performance of the backlight unit with light guide plate(LGP), we investigated the effects of LGP patterns on the brightness and viewing angles properties of the backlight unit. We designed several patterns of LGP and calculated their optical properties by the optical simulation. The results reveal that the highest brightness and wide viewing angle was achieved with the extended-closed-polygon diffusion pattern and upper triangle prism pattern of the LGP.