http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이영문(Young-Moon Lee),김선일(Sun-Il Kim),정희철(Hee-Chul Jung),장은숙(Eun-Suk Jang),장승규(Seung-Gyu Jang) 한국기계가공학회 2009 한국기계가공학회 춘추계학술대회 논문집 Vol.2009 No.6월
In the analysis of grinding process, the maximum undeformed chip thickness, hmax, is one of the most important parameters as actual depth of cut by a grain. In this study, a series of grinding test has been carried out on Poly-urethane with varying conditions of grinding wheel, cutting depth and workpiece temperature. It was possible to estimate the relationship between maximum undeforemed chip thickness and spercific grinding energy. The specific energys at -30°C are greater than those of at room temperature.
폴리우레탄 방수재의 숯 첨가량에 따른 인장성능 변화추이 연구
박진상 ( Park Jin-sang ),김동범 ( Kim Dong-bum ),박완구 ( Park Wan-goo ),하미영 ( Ha Mi-young ),김병일 ( Kim Byoung-il ),오상근 ( Oh Sang-keun ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.2
Polyurethane coating materials are widely used in waterproofing construction because they ensure easy workability and high performance mechanical properties, and such polyurethane coating materials are in various mixture ratios. This study carried out a test to determine the basic physical property changes of polyurethane coating material based on the amount of charcoal additives to. The results showed that he tensile strength was found to be 3.1 N / ㎟ when the charcoal amount was at 2%, displaying the highest performance rate.
서동조(Dongjo Seo),곽윤근(Yungeun Gwak),고형진(Hyougjin Ko),이병우(Byeongwoo Lee) 한국자동차공학회 2021 한국자동차공학회 부문종합 학술대회 Vol.2021 No.6
폴리우레탄은 폴리올(Polyol, 2개 이상의 –OH를 갖는 화합물)과 이소시아네이트(Isocyanate)의 연속된 우레탄 결합으로 형성되는 고분자 화합물로, 우수한 흡음 성능과 단열 성능으로 자동차 산업에 많이 이용되고 있다. 폴리우레탄은 원액 배합비에 따라 경질, 반경질, 연질로 나뉘는데, 경질은 파이프, 냉장고 등에서 단열재로 사용되며, 반경질은 자동차 Head Lining, Dash Insulation, Hood Insulation, 핸들 In-Panel 등 차음성과 충격저항성이 요구되는 부품에서, 연질은 Iso Pad, 자동차 시트 등 흡음 성능이 요구되는 부품에 적용되고 있다. 최근에는 생산기술의 발전 및 디자인적 요소 고려사항이 증대됨에 따라 자동차 부품의 형상이 복잡해지고 있는 실정이다. 이로 인해 다양한 형상의 폴리우레탄 발포가 요구되기 시작했고, 발포가 이루어지지 않는 미발포 영역이 증대되어 부품생산에 어려움을 겪고 있다. 생산 현장에서는 미발포가 발생할 경우 제품의 형상 변경을 통한 폴리우레탄의 흐름성 개선, Vent를 통한 발포 가스 배출, 금형 온도 조절 및 주입량 조절 등을 통해 개선을 실시한다. 이러한 개선사례는 수많은 Try-Out 및 금형 수정을 수반하게 되며 이로 인한 시간적, 금액적 손실이 발생되는 원인이다. 따라서 폴리우레탄 발포에 관한 선행 시뮬레이션으로 시간적, 금전적 손실을 줄이고자 하는 노력이 계속되고 있다. 이에 본 연구에서는 상용 소프트웨어인 Inspire PolyFoam을 이용해 반경질 폴리우레탄폼에 대한 선행 시뮬레이션 환경을 구축하고, 반경질 폴리우레탄폼에 대한 시뮬레이션 과정에 대하여 기술하고자 한다.
이영문(Young-Moon Lee),김선일(Sun-Il Kim),정희철(Hee-Chul Jung),장은숙(Eun-Suk Jang),장승규(Seung-Gyu Jang) 한국기계가공학회 2009 한국기계가공학회 춘추계학술대회 논문집 Vol.2009 No.6
In the analysis of grinding process, the maximum undeformed chip thickness, hmax, is one of the most important parameters as actual depth of cut by a grain. In this study, a series of grinding test has been carried out on Poly-urethane with varying conditions of grinding wheel, cutting depth and workpiece temperature. It was possible to estimate the relationship between maximum undeforemed chip thickness and spercific grinding energy. The specific energys at -30°C are greater than those of at room temperature.
이진형(JinHyung Lee),이종헌(JongHeon Lee),이호달(HoDal Lee),김이태(YTae Kim),성창모(Changmo Seong),박장석(JangSeok Park) 한국자동차공학회 2018 한국자동차공학회 부문종합 학술대회 Vol.2018 No.6
A manufacturing process for applying spray-type poly-urethane material is developed for dash isolation pad’s heavy layer. With the manufacturing process, thickness of heavy layer of dash isolation pad could be varied locally. In this study, the sound insulation performance of the material had been studied in the material level. The weak areas of engine-noise transmission were found experimentally for a target vehicle. By increasing heavy layer’s thickness at the noise-transmission weak areas and decreasing the thickness at the non-weak areas, the noise-transmission was refined and the total weight was also reduced. It is expected that the developed material and manufacturing process could contribute to weight and cost reduction of sound packages.
김광인,이주헌,이현주,한학수 한국수소및신에너지학회 2017 한국수소 및 신에너지학회논문집 Vol.28 No.1
In this study, Poly-urethane acrylate (PUA) was synthesized by the reaction between Polycaprolactonetriol (PCLT) and Isophorone dissocyanate (IPDI) and hybridized with inorganic materials. Tetraethylortho silicate (TEOS) and nano clay (Closite 20A) were used as inorganic particles. For the hybridization of TEOS with PUA, sol-gel method is used, in which TEOS is made into spherical particle in the firsthand. In the case of Nano clay, hybridization is carried out through the dispersion as Nano clay has a layered structure. The solution of PUA hybrid was made into a film after UV curing and its thermo and electrical properties were measured. The experimental analysis and result demonstrate that the PUA hybrid shows an improved thermal properties and lower dielectric constant than that of the non-hybrid PUA. The trend of improved properties was different depending on structure of inorganic materials.
세그멘트 폴리우레탄 우레아에 기초한 순수 고체전해질의 이온 전도성
이상걸,조남주 부산대학교 생산기술연구소 2000 生産技術硏究所論文集 Vol.59 No.-
4,4'-methylene - bis(phenyl isocyanate), ethylene diamine과 poly(ethylene oxide)(PEO)/poly( propylene oxide)(PPO)(Mw~1000, 2440, 3400)의 공중합체로 세그멘트 폴리우레탄 우레아(SPUU)를 하였다. 전해질은 용액 법으로 필름을 형성시켜 제조하였다. 고분자전해질 필름의 이온 전도도는 Pt 전극을 사용하여 교류 임피던스로 측정하였다. 이들 고분자전해질은 실온에서 높은 전도도를 보였으며, lithium perchlorate를 약 20%(w/w) 함유한 고분자전해질이 가장 우수하여 실온에서 3.1×10-5s/cm 가 나왔다. 이들 복합체의 이온 전도도는 온도에 대해 Arrhenius형태를 따르는 것을 알 수 있었다. 이상의 결과는 용매가 포함되지 않는 고분자 전해질로서 SPUU의 가능성을 제시하고 있다. Various types of segmented poly(urethane urea)s(SPUUs) were synthesized from 4,4-metylene-bis(phenyl isocyanate), ethylene diamine, and poly(ethylene oxide) (PEO)/poly(polypropylene oxide) (PPO) copolymer with molecular weights of 1000, 2440 and 3400. The films of electrolyte were prepared by the solution casting method. Ionic conductivity measurements were carried out on thin film of the polymer electrolytes that had been contacted with Pt electrode assembly using conventional AC impedance spectroscopy. These polymer electrolytes showed inherently high ionic conductivity at room temperature. The optimum concentration of lithium perchlorate was about 20%(w/w). resulting in an ionic conductivity of about 3.1 × 10-5S/cm at room temperature. The ionic conductivity of these complexe was found to show the Arrhenius tripe temperature dependence. These results indicate that prepared SPUUs electrolytes are promising candidates for the development of polymeric solvent-free electrolyte.
세그멘트 폴리우레탄 우레아에 기초한 블렌드계 고체전해질의 분자운동성과 이온 전도성
이상걸,이갑열,조남주 부산대학교 생산기술연구소 2000 生産技術硏究所論文集 Vol.59 No.-
순수 고체 전해질과 겔형 고분자 전해질의 장점을 취합한 새로운 형태의 블렌드계 고체 전해질을 제조할 목적으로, 현재 유기 가소제로 널리 쓰이는 ethylene carbonate(EC), propylene carbonate(PC) 대신 실온에서 휘발성이 낮은 저분자량의 polyethylene g1ycol(PEG) 및 polyethylene glycol dimethylether(PEGDME)를 사용하였다. 또한, 고분자 매트릭스로는 지지체 역할 뿐만 아니라 염과의 복합체를 형성할 수 있도록 soft segment에 PEO/PPO 공중합체를, hard segment urea기를 도입한 세그멘트 폴리우레탄 우레아(segmented polyurethane urea, SPUU)를 사용하였다. 제조된 SPUU팀에 휘발성이 낮은 저분자량의 PEC 및 PEGDME와 리튬염을 부가하여 solution casting법으로 블렌드계 고체 전해질을 제조한 다음 교류 임피던스법으로 이온 전도도를 측정하였다. 이때 이온 전도도는 PEO 및 PEGDME의 분자량 및 함량에 의존함을 관찰할 수 있었다. In order to prepare a new blend-type electrolyte possessing the merits of both an intrinsic polymer electrolyte and gel-electrolyte, we report on a class of nonvolatile (dry) polymer electrolyte, prepared by plasticizing a segmented polyurethaneurea (SPUU) with solution of lithium salt in oligomeric poly(ethylene glycol) (PEG) and poly(ethylene glycol) dimethyl ethers (PEGDME). SPUU having PEO/PPO copo1ymer in soft segment and urethanerurea group in hard segment was used in order to prepare a mechanically stable blend-type electrolyte for for improving the affinity between PEC or PEGDME and matrix. and the ionic conductivity was measured by AC impedance spectroscopy. As a result, it was observed that the ionic conductivity depended on the molecular weight and contents of PEC and PEGDME.