http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
洪淳錫,洪完杓 홍익대학교 산업기술연구소 2000 産業技術 Vol.10 No.-
The Electronic starter circuit of the preheated turn-on fluorescent lamp was developed. Using th switch control circuit and restart circuit in connection with preheat circuit and ?erminal stage protection circuit. It was found that exactly controlled lower discharge voltage extended the life time of the fluorescent lamp more than six times. And relatively longer ?reheat time made the lamp turn-on satisfactorily without twinkling.
TCAD를 이용한 VMOSFET구조의 전류-전압 특성에 관한 연구
洪淳錫,洪完杓 홍익대학교 산업기술연구소 2002 産業技術 Vol.12 No.-
In this paper the Id-Vgs electrical characteristics of V-grooved MOSFET has been analyzed by solving the TCAD. In this Device, the expressions for the threshold voltage, the drain current, gate current were derived. The Id-Vgs electrical characteristics upon channel lengths was calculated by changing following variables : drain-source voltage, source bulk voltage, substrate doping concentration, oxide thickness, channel length, source/drain arsenic doping concentration, diffusion, ion implanted doping level, and ion implanted depth. In 0.5㎛ process, NMOS treshold Voltage is 0.537V. and VMOS treshold voltage is 0.489V.
Phyo Ei Ei Htay,이성복,이석원,이유진,Kyung Lhi Kang,Sung Ok Hong 대한치과보철학회 2023 The Journal of Advanced Prosthodontics Vol.15 No.5
PURPOSE. This study evaluated the reliability of the chair-side CAD-CAM surgical guide (CSG) in the anterior maxilla by comparing its accuracy with the laboratory 3D-printed surgical guide (3DSG) and manual surgical guide (MSG) concerning different levels of dentists' surgical experience. MATERIALS AND METHODS. Ten surgical guides of each type (MSG, 3DSG, and CSG) were fabricated on a control study model with missing right and left central incisors. Sixty implants were placed in 30 study models by two dentists (one inexperienced and one experienced) using three different types of surgical guides. Horizontal deviations at shoulder and at apex, vertical, and angular deviations were measured after superimposing the planned and placed implant positions in the software. Kruskal-Wallis and Mann-Whitney U tests were used to compare the accuracy of three types of surgical guides in each dentist group and the accuracy of each surgical guide between two dentists (α = .05). RESULTS. There were no significant differences in any deviations between CSG and 3DSG, apart from angular deviation, for both dentists’ groups. Moreover, both CSG and 3DSG showed no significant differences in accuracy between the two dentists (P > .05). In contrast, MSG demonstrated significant differences from CSG and 3DSG and a significant difference in accuracy between the two dentists (P < .05). CONCLUSION. CSG provides superior accuracy to MSG in implant placement in the maxillary anterior region and is comparable to 3DSG at different levels of surgical experience, while offering the benefits of shorter manufacturing time and reduced patient visits.
VMOSFET와 NMOSFET 구조에 대한 열전자방출의 비교분석에 대한 연구
洪淳錫,洪完杓 홍익대학교 산업기술연구소 2003 産業技術 Vol.13 No.-
In this paper, the hot-carrier generation due to impact ionization of V-grooved MOSFET has been analyzed by solving the TCAD. In this Device, the expressions for hot-carrier, substrate current, gate current, drain current were derived. The hot-carrier generation due to impact ionization was calculated by changing following variables : substrate voltage, gate-drain voltage, source bulk voltage, substrate doping concentration, oxide thickness, channel length, source/drain arsenic doping concentration, diffusion, ion implanted doping level, and ion implanted depth.
마이크로 컨트롤러를 이용한 지능구조물의 진동제어시스템 개발
황재혁,홍의표,이원석,최용훈 한국항공대학교 항공우주산업기술연구소 2003 航空宇宙産業技術硏究所 硏究誌 Vol.13 No.-
본 논문에서는 유연구조물의 진동을 제거하기 위하여 압전 세라믹(PZT)을 감지기와 작동키로 이용하였다. 진동을 제거하기 위한 제어 방법은 위치 되먹임 제어와 속도 되먹임 제어 두가지 방법을 사용하였다. 위치 되먹임 제어는 구조물의 각 지점의 위치를 감지해 내고 이를 역으로 걸어 주는 것이고 속도 되먹임 제어는 유연부착물의 각 지점에서의 속도에 대한 정보를 역으로 걸어 주는 것이다. 즉, 압전 감지기의 감지 전압을 이용해서 속도 되먹임 제어를 할 수 있다. 적용된 두 제어 방법 모두 개회로일 때 보다 좋은 성능을 나타내었다. 그러나 위치 되먹임 제어가 스필오버(spill-over)가 심했고 속도 되먹임 재어보다 정착시간(Settling Time)이 더 길었다. 본 실험에서는 속도 되먹임 제어가 적은 에너지로도 위치 되먹임 제어보다 좋은 성능을 보였다. 제어시스템을 구축하기 위해서 마이크로 컨트롤러를 사용한 제어보도를 설계하고 제작하였다. 제어 보드에 사용된 마이크로 컨트롤러는 Intel 80c196ke를 사용하였으며 마이크로 컨트롤러의 A/D, D/A 기능을 보완하기 위해서 A/D, D/A 보드를 제작하였으며, 사용자 편의와 원거리 제어를 위해서 사용자 보드를 제작하였다. 본 실험에서 제작한 제어 보드는 본 실험에 쓰인 외괄보 뿐만 아니라 압전 세라믹을 이용한 모든 구조물의 능동진동제어에 쓰인 수 있도록 제작되었다.