http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황선광(S. K. Hwang),백현무(H. M. Baek),주호선(H. S. Joo),김신회(S. H. Kim),임용택(Y. T. Im),손일헌(I. H. Son),배철민(C. M. Bae) 한국소성가공학회 2013 한국소성가공학회 학술대회 논문집 Vol.2013 No.10
In this work, a multi-pass continuous hybrid (CH) process is designed and its practicality is investigated for manufacturing high performing low-carbon steel wires in a continuous way. For this purpose, the multi-pass CH process was experimentally set up and applied up to five passes with route A at room temperature and was compared with those for the multi-pass wire drawing(WD) process. According to the present investigation, the grain-refined wires, which have many well defined high angle grain boundaries, with the enhanced ultimate tensile strength and comparable ductility were successfully produced by the five-pass CH process compared to the WD process. In addition, the fatigue limit of the specimen produced by the CH process was enhanced due to the grain-refined microstructure of the specimen compared to the one of the WD process. Based on these observations, it was found that the multi-pass CH process can effectively produce a fine-grained wire with enhanced mechanical properties compared to the WD process.
열간압출 공정을 이용한 Al-Cu 클래드 압출에 관한 연구
이성윤(S. Y. Lee),이인규(I. K. Lee),이상곤(S. K. Lee),황선광(S. K. Hwang),정명식(M. S. Jeong) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.5월
최근 미래형 친환경 자동차 개발에 대한 이슈가 대두됨에 따라 차량용 부품의 경량화 및 고기능 부품 개발에 관한 관심이 증가하고 있는 추세이다. 이중 이종 소재를 접합하여 단일 소재가 가지는 우수한 특성을 접합을 통해 복합적 특성을 확보함에 따라 단일 소재의 한계를 극복하고자 하는 연구가 활발히 진행되고 있다. 이종 소재 접합에 관한 연구는 주로 압연접합, 3D 프린팅, 마찰교반 접합 등 다양한 분야에서 적용되고 있으나 형상에 따른 생산성의 한계가 문제 있다. 따라서 본 연구에서는 복잡한 형상 제품의 생산성 향상을 위해 열간 압출 공정을 이용하여 이종 소재접합에 관한 연구를 수행하였다. 연구에 적용된 소재는 Al 합금과 Cu 합금이며 최종 형상은 단면이 직사각형에 중심축을 기준으로 각기 다른 소제가 분포되어 접합된 이종소재 사각바이다. 제품 성형 및 공정 설계를 위해 성형해석 프로그램인 DEFORM 3D를 활용하였으며, 실제 압출테스트를 통해 이종소재 접합의 가능성을 확인하였다.